Inward Solidification Heat Transfer of Nano-Enhanced Phase Change Materials in a Spherical Capsule: An Experimental Study
- 4 October 2017
- journal article
- research article
- Published by Wiley in Journal of Heat Transfer
- Vol. 140 (2)
Abstract
The classical problem of inward solidification heat transfer inside a spherical capsule, with an application to thermal energy storage (TES), was revisited in the presence of nano-enhanced phase change materials (NePCM). The model NePCM samples were prepared by dispersing graphite nanoplatelets (GNPs) into 1-tetradecanol (C14H30O) at loadings up to 3.0 wt %. The transient phase change, energy retrieval, and heat transfer rates during solidification of the various NePCM samples were measured quantitatively using a volume-shrinkage-based indirect method. The data reduction and analysis were carried out under single-component, homogeneous assumption of the NePCM samples without considering the microscale transport phenomena of GNPs. It was shown that the total solidification time becomes monotonously shorter with increasing the loading of GNPs, in accordance with the increased effective thermal conductivity. The maximum relative acceleration of solidification was found to be more than 50% for the most concentrated sample, which seems to be appreciable for practical applications. In addition to enhanced heat conduction, the possible effects due to the elimination of supercooling and viscosity growth were elucidated. The heat retrieval rate was also shown to be increased monotonously with raising the loading of GNPs, although the heat storage capacity is sacrificed. Despite the remarkable acceleration of the solidification time, the use of a high loading (e.g., 3.0 wt %) was demonstrated to be possibly uneconomical because of the marginal gain in heat retrieval rate. Finally, correlations for the transient variations of the melt fraction and surface-averaged Nusselt number were proposed.Keywords
Funding Information
- National Natural Science Foundation of China (51276159)
- Natural Science Foundation of Zhejiang Province (LR17E060001)
This publication has 24 references indexed in Scilit:
- A volume-shrinkage-based method for quantifying the inward solidification heat transfer of a phase change material filled in spherical capsulesApplied Thermal Engineering, 2016
- Experimental Study of Vibration Effects on Heat Transfer during Solidification of Paraffin in a Spherical ShellExperimental Heat Transfer, 2015
- Effects of the number and distribution of fins on the storage characteristics of a cylindrical latent heat energy storage system: a numerical studyHeat and Mass Transfer, 2012
- Numerical heat transfer analysis of the packed bed latent heat storage system based on an effective packed bed modelEnergy, 2010
- Numerical and Experimental Study of Solidification in a Spherical ShellJournal of Heat Transfer, 2008
- Heat transfer characteristics of thermal energy storage system using PCM capsules: A reviewRenewable and Sustainable Energy Reviews, 2008
- Solidification inside a sphere—an experimental studyInternational Communications in Heat and Mass Transfer, 2006
- Experiments on charging and discharging of spherical thermal (ice) storage elementsInternational Journal of Energy Research, 2002
- Thermal characteristics of paraffin in a spherical capsule during freezing and melting processesInternational Journal of Heat and Mass Transfer, 2000
- Perturbation Solutions for Spherical Solidification of Saturated LiquidsJournal of Heat Transfer, 1973