Solid state transformation kinetics of high nodule count ductile Iron
Authors:
- 1 August 2003
- journal article
- research article
- Published by Taylor & Francis in International Journal of Cast Metals Research
- Vol. 16 (1-3) , 179-184
Abstract
This work focuses on the study of the kinetics of solid state transformations of thin wall ductile iron (TWDI). The aim is to identify the effect of the nodule count and the matrix homogeneity on the rate of transformation. The study is carried out on samples taken from sand cast plates of thickness ranging from 1.5 to 4mm, which show nodule counts up to 1700 per square millimetre. The results are compared to those obtained on samples taken from 12.5 mm thick Y-blocks, having approximately 300 nodules per square millimetre. Kinetics of ferritising, austenitising, austempering and cementite dissolution are studied. The results show that solid state transformations involving carbon transport from the matrix to the nodules or vice versa, such as subcritical ferritising and austenitising, show faster kinetics as the nodule count increases. The kinetics of the austempering transformation, which does not involve changes in the carbon content of the matrix, is not affected by the nodule count. The dissolution of the cementite present in unalloyed TWDI, also takes place at a very fast rate, ranging between 3 and 5 % per minute.Keywords
This publication has 8 references indexed in Scilit:
- Shape and Count of Free Graphite Particles in Thin Wall Ductile Iron Castings.ISIJ International, 2002
- Solidification macrostructure of spheroidal graphite cast ironInternational Journal of Cast Metals Research, 2001
- Influence of the solidification microstructure on the mechanical properties of ductile ironInternational Journal of Cast Metals Research, 1999
- The influence of cast structure on the austempering of ductile ironInternational Journal of Cast Metals Research, 1999
- The influence of nodule count on the austempering kinetics of a Mn-Cu ductile ironInternational Journal of Cast Metals Research, 1999
- Austempering kinetics of a Mn-Mo-Cu ductile iron with a high nodule countInternational Journal of Cast Metals Research, 1999
- Metallographic study on the influence of the morphology and distribution of graphite on the solid state transformations of grey and ductile cast ironInternational Journal of Cast Metals Research, 1998
- Revealing the solidification structure of nodular ironCast Metals, 1995