Thermal Activation of PEDOT:PSS/PM6:Y7 Based Films Leads to Unprecedent High Short‐Circuit Current Density in Nonfullerene Organic Photovoltaics
Open Access
- 9 December 2022
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 13 (4)
Abstract
Finding an effective approach to suppress trap formation is a potential route for enhancing the performance of nonfullerene organic photovoltaic (NF‐OPVs) devices. Here, an extraordinary short‐circuit current density (JSC) value of 32.65 mA cm‐2 is achieved, higher than the state‐of‐the art NF‐OPVs reported, reaching a high power conversion efficiency (PCE) of 17.92%. This remarkable enhancement is exhibited through the fine‐tuning of PEDOT:PSS/PM6:Y7 films and interface morphologies via applying the prethermal treatment approach (Pre‐TT) to the devices, which exhibit JSC and PCE enhancement of 21% and 8%, respectively, compared to the pristine devices. Accordingly, the dependence of the JSC upon the Pre‐TT approach through a range of morphological, optical, electrical, and advanced transient measurements is investigated. The Pre‐TT‐based films are found to possess optimal smooth blend morphology with better dispersity owing to reduced domain size. Moreover, the measurements show that the optimized treated devices present higher exciton dissociation probabilities and generation rate of the free charge carriers, showing an ideal balanced electron/hole mobility that reveals the JSC and PCE enhancement. Hence, Pre‐TT approach provides a facile passivation strategy that reduces the trap state density of the blend film, improves interface charge transfer, allows balanced electron/hole mobility, and thus promotes device performance.Keywords
Funding Information
- Institut Català d'Investigació Química
- Institució Catalana de Recerca i Estudis Avançats
This publication has 113 references indexed in Scilit:
- Degradation mechanisms in organic photovoltaic devicesOrganic Electronics, 2012
- Surface Plasmonic Effects of Metallic Nanoparticles on the Performance of Polymer Bulk Heterojunction Solar CellsACS Nano, 2011
- Relation between the barrier interface and the built-in potential in pentacene/C60 solar cellApplied Physics Letters, 2010
- Simultaneous determination of carrier lifetime and electron density-of-states in P3HT:PCBM organic solar cells under illumination by impedance spectroscopySolar Energy Materials and Solar Cells, 2010
- Influence of oxygen on semi-transparent organic solar cells with gas permeable electrodesOrganic Electronics, 2009
- Charge carrier mobility and lifetime of organic bulk heterojunctions analyzed by impedance spectroscopyOrganic Electronics, 2008
- Conjugated Polymer-Based Organic Solar CellsChemical Reviews, 2007
- Hybrid polymer/metal oxide solar cells based on ZnO columnar structuresJournal of Materials Chemistry, 2006
- Compositional Dependence of the Performance of Poly(p‐phenylene vinylene):Methanofullerene Bulk‐Heterojunction Solar CellsAdvanced Functional Materials, 2005
- Simulation of light intensity dependent current characteristics of polymer solar cellsJournal of Applied Physics, 2004