Synergetic effect of fly ash cenospheres and multi‐walled carbon nanotubes on mechanical and tribological properties of epoxy resin coatings
- 3 April 2021
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (32) , 50789
Abstract
The multiform wear of friction pair components is the main cause of marine equipment failure and epoxy resin (EP) coatings have been widely used in this field. Fly ash cenospheres (FACs) and multi‐walled carbon nanotubes (MWCNTs) were used to reinforce the tribological properties of EP coatings. The synergetic effects of FACs and MWCNTs on the mechanical and tribological properties of EP coatings were studied. Experimental results show that the tensile and flexural properties of FACs‐MWCNTs/EP composites are significantly reinforced. The tribological performance of EP composite coatings under seawater conditions is improved by the synergetic effect of FACs and MWCNTs, especially, the 10 wt.% FACs‐1 wt.% MWCNTs/EP coatings behave the most excellent tribological properties. It indicates that FACs can increase the hardness of EP coatings and provide a smoother surface for the water film formation, which decreases the friction coefficient and wear volume. MWCNTs can increase the elasticity modulus of EP, and act as a rope to prevent EP matrix and FACs from being desquamated.Keywords
Funding Information
- National Natural Science Foundation of China (51975042)
This publication has 31 references indexed in Scilit:
- Damage resistance and anticorrosion properties of nanosilica-filled epoxy-resin composite coatingsProgress in Organic Coatings, 2015
- Silane-incorporated epoxy coatings on aluminum alloy (AA2024). Part 1: Improved corrosion performanceCorrosion Science, 2015
- Enhanced thermal conductivity of epoxy–matrix composites with hybrid fillersPolymers for Advanced Technologies, 2014
- Epoxy/oil fly ash composites prepared through in situ polymerization: Enhancement of thermal and mechanical propertiesPolymer Composites, 2014
- Preparation, mechanical properties and biocompatibility of graphene oxide/ultrahigh molecular weight polyethylene compositesEuropean Polymer Journal, 2012
- Friction and wear behavior of nanosilica-filled epoxy resin composite coatingsApplied Surface Science, 2012
- Trends in the development of environmentally friendly fouling-resistant marine coatingsNature Communications, 2011
- Modification of Graphene Platelets and their Tribological Properties as a Lubricant AdditiveTribology Letters, 2010
- Erosion–corrosion interactions and their effect on marine and offshore materialsWear, 2006
- Water up-take evaluation of new waterborne and high solid epoxy coatings.Progress in Organic Coatings, 1999