Application of Response Surface Methodology in Predicting and optimizing the properties of Concrete containing Ground Scoria and Metakaolin blended Cement in Concrete
Open Access
- 1 July 2023
- journal article
- research article
- Published by Interdisciplinary Publishing Academia in Journal of Civil Engineering Frontiers
- Vol. 4 (02) , 19-26
Abstract
The effect of Metakaolin and ground Scoria on various properties of concrete were investigated and optimised using Response Surfaces Methodology (RSM) in this study. Seven batches of concretes were cast at water to cement ratio of 0.5 and 5% fixed Metakaolin with 0, 5, 10, 15 and 20% Ground Scoria replaced cement. The resulting concrete then was tested for Slump. The Concrete cubes were cast and cured for 3, 7, 14, 28 and 60days before Water absorption and Compressive strength test were carried out. at all replacement levels of Metakaolin/Scoria content, Workability, Water absorption, Density and Compressive strength decreased when compared with the control concrete. However, Water absorption, Density and Compressive strength slightly increased with increase in curing age. The models developed were quite accurate as the percentages of error were in a good agreement and can explain the variability in Metakaolin/Ground Scoria concrete. Numerical method of optimisation was applied to determine the optimum mix proportions for Metakaolin/Ground Scoria. The optimum mix of concrete was obtained by addition of 8.60% GS after curing for 12-days with 0.8 desirability. Based on the result of optimisation, incorporating the optimum values of 13.6% (5%MK+8.6%GS) metakaolin and ground Scoria in concrete as cement substitute for every one kilogram of cement, can potentially result in reduction of CO2 emissions by 0.07-0.1224kg.Keywords
This publication has 14 references indexed in Scilit:
- Influence of Pulverized Animal Bone and Animal Bone Ash on the Mechanical Properties of Normal Strength Concrete using Response Surface MethodCONSTRUCTION, 2023
- Optimization of Calcined Termite-Mound Material (CTM) Mortar and Concrete using Response Surfaces MethodologyGlobal Journal of Engineering and Technology Advances, 2023
- RSM and ANN modelling of the mechanical properties of self-compacting concrete with silica fume and plastic waste as partial constituent replacementCleaner Materials, 2022
- New perspectives on utilization of sequestration technologies in cement-based materialsConstruction and Building Materials, 2021
- Prediction of Strength Properties of Concrete Containing Calcined Black Cotton Soil Using Response Surface MethodologyAmerican Journal of Materials Synthesis and Processing, 2020
- Application of the response surface method to optimize alkali activated cements based on low-reactivity ladle furnace slagConstruction and Building Materials, 2020
- Autogenous Shrinkage, Pozzolanic Activity and Mechanical Properties of Metakaolin Blended Cementitious MaterialsKSCE Journal of Civil Engineering, 2019
- Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperaturesJournal of Advanced Research, 2012
- The Hierarchy Principle in Designed Industrial ExperimentsQuality and Reliability Engineering International, 2005
- CARBON DIOXIDE EMISSIONS FROM THE GLOBAL CEMENT INDUSTRYAnnual Review of Energy and the Environment, 2001