Terlumun Adagba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Terlumun Adagba has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Sani Aliyu Abubakar
Department of Civil Engineering, Kampala International University, Ishaka, Bushenyi, Uganda
2 shared publications A. A. Umar
Department of Civil Engineering, Federal University Dutsin-Ma, Katsina, Nigeria
1 shared publicationAbubakar Sabo Baba
Department of Civil Engineering, Federal University Dutsin-Ma, Katsina
1 shared publication- Abubakar Sabo Baba
Federal University Dutsin-Ma, Nigeria
1 shared publication - Abubakar Sabo Baba
Faculty of Engineering, Federal University Dutsinma, Katsina, Nigeria
1 shared publication Aliyu Abubakar
Department of Civil Engineering, Abubakar Tafawa Balewa University, Bauchi
1 shared publication
Latest Publications
- Open Access
- 24 August 2026
- Published by LIDSEN Publishing Inc in Recent Progress in Materials
- Vol. 08 (03) , 1-40
The Potential of Cassava Peel Ash (CPA) as a Cement Replacement Material for Sustainable Concrete Production: A Review
The growing demand for sustainable, resource-efficient construction materials has heightened interest in agricultural waste-derived supplementary cementitious materials, among which cassava peel ash (CPA) has emerged as a promising alternative. This review critically evaluates cassava peel ash (CPA) as a potential pozzolanic material for cement and concrete applications, with emphasis on its physicochemical characteristics, fresh and hardened performance, and durability behaviour. The literature indicates that CPA, a material derived from the calcination of cassava peels, possesses appreciable pozzolanic potential. It is a lightweight material; however, CPA-based concretes maintain normal weight densities. CPA generally prolongs setting times, reflecting a moderated hydration process. At low to moderate replacement levels, typically not exceeding 15% by mass of cement, CPA-based concretes demonstrate acceptable mechanical performance with notable potential for late-age strength development. Durability performance is significantly enhanced, with improved resistance to acid, sulphate, and chloride ingress, as well as reduced drying shrinkage, primarily due to the pozzolanic activity that promotes matrix densification and pore structure refinement. However, excessive cement substitution adversely affects binder reactivity and matrix integrity, with observed variations in its quality, pozzolanic activity and strength development largely attributed to differences in cassava variety, soil chemistry, combustion conditions and processing methods. Despite all these glaring potentials, major knowledge gaps regarding the long-term durability, alkali-silica reaction susceptibility, thermal performance, life-cycle assessment, industrial-scale production implementation and establishing quality-control protocols persist. Furthermore, predictive modelling and optimization approaches remain underutilized despite their potential to address the inherent variability associated with agro-waste-derived materials. When properly processed and proportioned, CPA is a viable, eco-efficient supplementary cementitious material for durable concrete and low-to-moderate strength applications in sustainable construction.
- 24 August 2026
- Published by LIDSEN Publishing Inc in Recent Progress in Materials
- Vol. 08 (03) , 1-40
Open AccessThe Potential of Cassava Peel Ash (CPA) as a Cement Replacement Material for Sustainable Concrete Production: A Review
The growing demand for sustainable, resource-efficient construction materials has heightened interest in agricultural waste-derived supplementary cementitious materials, among which cassava peel ash (CPA) has emerged as a promising alternative. This review critically evaluates cassava peel ash (CPA) as a potential pozzolanic material for cement and concrete applications, with emphasis on its physicochemical characteristics, fresh and hardened performance, and durability behaviour. The literature indicates that CPA, a material derived from the calcination of cassava peels, possesses appreciable pozzolanic potential. It is a lightweight material; however, CPA-based concretes maintain normal weight densities. CPA generally prolongs setting times, reflecting a moderated hydration process. At low to moderate replacement levels, typically not exceeding 15% by mass of cement, CPA-based concretes demonstrate acceptable mechanical performance with notable potential for late-age strength development. Durability performance is significantly enhanced, with improved resistance to acid, sulphate, and chloride ingress, as well as reduced drying shrinkage, primarily due to the pozzolanic activity that promotes matrix densification and pore structure refinement. However, excessive cement substitution adversely affects binder reactivity and matrix integrity, with observed variations in its quality, pozzolanic activity and strength development largely attributed to differences in cassava variety, soil chemistry, combustion conditions and processing methods. Despite all these glaring potentials, major knowledge gaps regarding the long-term durability, alkali-silica reaction susceptibility, thermal performance, life-cycle assessment, industrial-scale production implementation and establishing quality-control protocols persist. Furthermore, predictive modelling and optimization approaches remain underutilized despite their potential to address the inherent variability associated with agro-waste-derived materials. When properly processed and proportioned, CPA is a viable, eco-efficient supplementary cementitious material for durable concrete and low-to-moderate strength applications in sustainable construction.
- 29 October 2025
- Published by Sciencedomain International in Asian Journal of Environment & Ecology
- Vol. 24 (11) , 56-78
Geochemical and Geostatistical Analyses of the Groundwater Quality Patterns in Dutsin-Ma Town, Katsina State
This study is to analyse the geochemical properties and to depict the spatial patterns of groundwater quality for drinking in Dutsin-Ma town. A total of thirty-four (34) samples from boreholes and hand dug wells was obtained using the stratified sampling techniques. A total of twelve (12) parameters were analysed based on standard laboratory procedures. Results of the geochemical analysis were subjected to geostatistical analysis to establish the groundwater quality variations. The Kriging interpolation technique using Geographic Information System (GIS) was used to map and classify drinking water quality parameters into four (4) suitability visual representation based on WHO standard limits. The mean values of several WQPs including Pb, Cd, Mn, Fe, Cl, SO4, PO4, TH, TDS were present in concentrations higher than the World Health Organization (WHO) permissible limits. Mean values of measured parameters showed the means of 25.50 ± 32.84 µS/cm, 7.4 ± 0.51, 1.58 ± 0.85 mg/L, 2452.65 ± 1634.26 mg/L, 271.74 ± 606.30 mg/L, 33.06 ± 32.19 mg/L, 304.79 ± 597.66 mg/L, 722.56 ± 1537.76 mg/L, 0.46 ± 0.27 mg/L, 0.23 ± 0.33 mg/L, 0.03 ± 0.02 mg/L, 0.60 ± 0.66 mg/L for EC, pH, Turbidity, TDS, Sulphate, Phosphate, TH, Chloride, Lead, Manganese, Cadmium and Iron respectively. The student sample t-test showed no significant difference between the mean of the measured parameters and the WHO standard for Turbidity, Pb, Cd, EC, PO4, pH, TDS, Mn, and Fe. These visualizations are intended to assist government agencies in making informed decisions in the implementation of necessary actions and policies.
- 29 October 2025
- Published by Sciencedomain International in Asian Journal of Environment & Ecology
- Vol. 24 (11) , 56-78
Geochemical and Geostatistical Analyses of the Groundwater Quality Patterns in Dutsin-Ma Town, Katsina State
This study is to analyse the geochemical properties and to depict the spatial patterns of groundwater quality for drinking in Dutsin-Ma town. A total of thirty-four (34) samples from boreholes and hand dug wells was obtained using the stratified sampling techniques. A total of twelve (12) parameters were analysed based on standard laboratory procedures. Results of the geochemical analysis were subjected to geostatistical analysis to establish the groundwater quality variations. The Kriging interpolation technique using Geographic Information System (GIS) was used to map and classify drinking water quality parameters into four (4) suitability visual representation based on WHO standard limits. The mean values of several WQPs including Pb, Cd, Mn, Fe, Cl, SO4, PO4, TH, TDS were present in concentrations higher than the World Health Organization (WHO) permissible limits. Mean values of measured parameters showed the means of 25.50 ± 32.84 µS/cm, 7.4 ± 0.51, 1.58 ± 0.85 mg/L, 2452.65 ± 1634.26 mg/L, 271.74 ± 606.30 mg/L, 33.06 ± 32.19 mg/L, 304.79 ± 597.66 mg/L, 722.56 ± 1537.76 mg/L, 0.46 ± 0.27 mg/L, 0.23 ± 0.33 mg/L, 0.03 ± 0.02 mg/L, 0.60 ± 0.66 mg/L for EC, pH, Turbidity, TDS, Sulphate, Phosphate, TH, Chloride, Lead, Manganese, Cadmium and Iron respectively. The student sample t-test showed no significant difference between the mean of the measured parameters and the WHO standard for Turbidity, Pb, Cd, EC, PO4, pH, TDS, Mn, and Fe. These visualizations are intended to assist government agencies in making informed decisions in the implementation of necessary actions and policies.
- Open Access
- 1 December 2024
- Published by Kathmandu University
- Vol. 18 (2)
An overview of incorporating steel mill scale in the production of sustainable concrete
The rise in construction and infrastructural development has severely impacted the level of natural source utilization employed in concrete production leading to an astronomical increase in the cost of construction, scarcity of materials and other environmental concerns. The need to preserve our natural resources while mitigating the cost of concrete production has therefore triggered the search for alternative concrete producing materials. In this review, a critical look at the potential of incorporating steel mill scale in concrete production has been examined. Literature analysed confirmed it's suitability as waste that can be employed in the production of sustainable concrete. It's pulverisation makes it suitable for cement replacement showing that it falls into the class C fly ash of low pozzolanity. The optimal level of steel mill scale replacement is between 10%-30%, although at 100% replacement steel mill scale concrete has been reported to outperform control specimens. Steel mill scale incorporation produces concrete with high specific gravity and consequently high density, improved mechanical, water absorption and durability properties while negatively impacting the workability of concrete. For a wider application, much research is required so as to raise awareness among construction professionals.
- 1 December 2024
- Published by Kathmandu University
- Vol. 18 (2)
Open AccessAn overview of incorporating steel mill scale in the production of sustainable concrete
The rise in construction and infrastructural development has severely impacted the level of natural source utilization employed in concrete production leading to an astronomical increase in the cost of construction, scarcity of materials and other environmental concerns. The need to preserve our natural resources while mitigating the cost of concrete production has therefore triggered the search for alternative concrete producing materials. In this review, a critical look at the potential of incorporating steel mill scale in concrete production has been examined. Literature analysed confirmed it's suitability as waste that can be employed in the production of sustainable concrete. It's pulverisation makes it suitable for cement replacement showing that it falls into the class C fly ash of low pozzolanity. The optimal level of steel mill scale replacement is between 10%-30%, although at 100% replacement steel mill scale concrete has been reported to outperform control specimens. Steel mill scale incorporation produces concrete with high specific gravity and consequently high density, improved mechanical, water absorption and durability properties while negatively impacting the workability of concrete. For a wider application, much research is required so as to raise awareness among construction professionals.
- 23 November 2023
- Published by Inventive Research Organization in Recent Research Reviews Journal
- Vol. 2 (2) , 361-381
Impacts of Baobab Stem Fibre Reinforcement in Enhancing the Concrete Strength
Concrete has a limited ductile range, poor tensile strength, and low crack resistance. Therefore, for concrete to function at its best, reinforcing is needed to compensate for these weaknesses. The aim of the study is to assess how the inclusion of baobab stem fibre affects the mechanical characteristics of concrete. Additionally, it sought to investigate the correlation between compressive and flexural strengths when baobab stem fibre is utilised as a reinforcement material. Concrete mixed with baobab stem fibre at volumes of 0.5%, 1.0%, 1.5%, and 2.0%, each with a fibre length of 50mm, was produced using a mix ratio of 1:2:3. The concrete had a constant water/cement ratio of 0.50 and was cured for the periods of 7, 14, 28, 60, and 90 days before testing. Test are carried out to determine how the inclusion of baobab fibre as reinforcement influences workability, compressive strength, and flexural strength. The findings indicated that higher volume fraction of baobab fibre in the concrete influence negatively its workability and compressive strength, but had a positive impact on flexural strength. The flexural and compressive strength results were analysed using Analysis of Variance (ANOVA) with Minitab 19 software. The results revealed coefficients of variation, with R2 values of 97.42% and 93.41% regarding the correlation between flexural and compressive strength, respectively, considering the percentage of baobab fibre volume and curing period. indicating, the percentage baobab fibre volume and curing age are useful predictors of the generated models. The results show that adding baobab fibres to concrete can enhance its performance, especially in terms of flexural strength.
- 23 November 2023
- Published by Inventive Research Organization in Recent Research Reviews Journal
- Vol. 2 (2) , 361-381
Impacts of Baobab Stem Fibre Reinforcement in Enhancing the Concrete Strength
Concrete has a limited ductile range, poor tensile strength, and low crack resistance. Therefore, for concrete to function at its best, reinforcing is needed to compensate for these weaknesses. The aim of the study is to assess how the inclusion of baobab stem fibre affects the mechanical characteristics of concrete. Additionally, it sought to investigate the correlation between compressive and flexural strengths when baobab stem fibre is utilised as a reinforcement material. Concrete mixed with baobab stem fibre at volumes of 0.5%, 1.0%, 1.5%, and 2.0%, each with a fibre length of 50mm, was produced using a mix ratio of 1:2:3. The concrete had a constant water/cement ratio of 0.50 and was cured for the periods of 7, 14, 28, 60, and 90 days before testing. Test are carried out to determine how the inclusion of baobab fibre as reinforcement influences workability, compressive strength, and flexural strength. The findings indicated that higher volume fraction of baobab fibre in the concrete influence negatively its workability and compressive strength, but had a positive impact on flexural strength. The flexural and compressive strength results were analysed using Analysis of Variance (ANOVA) with Minitab 19 software. The results revealed coefficients of variation, with R2 values of 97.42% and 93.41% regarding the correlation between flexural and compressive strength, respectively, considering the percentage of baobab fibre volume and curing period. indicating, the percentage baobab fibre volume and curing age are useful predictors of the generated models. The results show that adding baobab fibres to concrete can enhance its performance, especially in terms of flexural strength.
- Open Access
- 16 November 2023
- Published by Birlesik Dunya Yenilik Arastirma ve Yayincilik Merkezi in Global Journal of Business, Economics and Management
- Vol. 13 (3) , 215-230
An analysis of factors causing failures and abandonment of construction projects in Kaduna state, Nigeria
The construction industry serves as one of the key players in a nation's economic growth. In this research, a study was carried out on the causes of construction project failures and abandonment in Kaduna state, Nigeria. The study’s objective was to identify the possible causes of failure and abandonment of construction projects and evaluate the identified causes in their order of importance. To achieve this, a quantitative research approach using questionnaires as an instrument for data collection in Kaduna state was adopted, with one hundred professionals and workers in the construction industry. Analysis of the data acquired from the returned questionnaires was done using MS Excel 2016 to obtain the descriptive statistics and the Relative Importance Index (RII). The research revealed that although insecurity was a burning issue for the industry especially in the study area, its ranking showed that it was not considered a significant factor among the other factors. It was recommended among others that, the industry professionals engage in transparent processes at all stages of the project.
- 16 November 2023
- Published by Birlesik Dunya Yenilik Arastirma ve Yayincilik Merkezi in Global Journal of Business, Economics and Management
- Vol. 13 (3) , 215-230
Open AccessAn analysis of factors causing failures and abandonment of construction projects in Kaduna state, Nigeria
The construction industry serves as one of the key players in a nation's economic growth. In this research, a study was carried out on the causes of construction project failures and abandonment in Kaduna state, Nigeria. The study’s objective was to identify the possible causes of failure and abandonment of construction projects and evaluate the identified causes in their order of importance. To achieve this, a quantitative research approach using questionnaires as an instrument for data collection in Kaduna state was adopted, with one hundred professionals and workers in the construction industry. Analysis of the data acquired from the returned questionnaires was done using MS Excel 2016 to obtain the descriptive statistics and the Relative Importance Index (RII). The research revealed that although insecurity was a burning issue for the industry especially in the study area, its ranking showed that it was not considered a significant factor among the other factors. It was recommended among others that, the industry professionals engage in transparent processes at all stages of the project.
- Open Access
- 2 October 2023
- Published by Research and Development Academy in Sustainable Engineering and Innovation
- Vol. 5 (2) , 117-126
The effect of cement replacement with metakaolin and sugarcane bagasse ash as supplementary cementitious materials on the properties of concrete
The use of supplementary cementitious materials in the cement and construction industry is growing rapidly owing to the numerous benefits the application of these materials offers. In this study, the effects of metakaolin (MK) and sugarcane bagasse ash (SCBA) used to partially replace cement on concrete are investigated. The experimental plan was designed using a constant 5% MK and 0-20% SCBA contents by weight. The mix design of 1:2:3 and water-binder (w/b) ratio of 0.5 was employed. Samples prepared were tested at the ages of 7, 14, 28, and 60 days respectively. Concrete workability, water absorption, and densities all showed a decrease with an increase in the percentage of SCBA. The compressive strengths at lower percentages of SCBA (5% and 10%) recorded higher values compared to that of 5% MK and 0% SCBA. An increase in the percentage of SCBA above 10% however led to a decrease in compressive strength. The maximum compressive strength of 22.17N/mm2 was obtained at 60 days in concrete containing 5% MK and 10% SCBA. Both the T-statistics and F-statistics values calculated were statistically significant and exceeded their critical values. This suggests that there is a good relationship between the compressive strength of SCBA and the curing period and that the variation in the curing period and SCBA also causes a variation in the concrete compressive strength. From the results obtained, it is concluded that 5% MK and 10% SCBA can be applied to replace cement for structural concrete production.
- 2 October 2023
- Published by Research and Development Academy in Sustainable Engineering and Innovation
- Vol. 5 (2) , 117-126
Open AccessThe effect of cement replacement with metakaolin and sugarcane bagasse ash as supplementary cementitious materials on the properties of concrete
The use of supplementary cementitious materials in the cement and construction industry is growing rapidly owing to the numerous benefits the application of these materials offers. In this study, the effects of metakaolin (MK) and sugarcane bagasse ash (SCBA) used to partially replace cement on concrete are investigated. The experimental plan was designed using a constant 5% MK and 0-20% SCBA contents by weight. The mix design of 1:2:3 and water-binder (w/b) ratio of 0.5 was employed. Samples prepared were tested at the ages of 7, 14, 28, and 60 days respectively. Concrete workability, water absorption, and densities all showed a decrease with an increase in the percentage of SCBA. The compressive strengths at lower percentages of SCBA (5% and 10%) recorded higher values compared to that of 5% MK and 0% SCBA. An increase in the percentage of SCBA above 10% however led to a decrease in compressive strength. The maximum compressive strength of 22.17N/mm2 was obtained at 60 days in concrete containing 5% MK and 10% SCBA. Both the T-statistics and F-statistics values calculated were statistically significant and exceeded their critical values. This suggests that there is a good relationship between the compressive strength of SCBA and the curing period and that the variation in the curing period and SCBA also causes a variation in the concrete compressive strength. From the results obtained, it is concluded that 5% MK and 10% SCBA can be applied to replace cement for structural concrete production.
- 20 September 2023
- Published by Sciencedomain International in Journal of Engineering Research and Reports
- Vol. 25 (9) , 142-154
Construction Project Failure and Abandonment in Kaduna State, Nigeria: An Analysis of the Causes Using the Relative Importance Index
- 20 September 2023
- Published by Sciencedomain International in Journal of Engineering Research and Reports
- Vol. 25 (9) , 142-154
Construction Project Failure and Abandonment in Kaduna State, Nigeria: An Analysis of the Causes Using the Relative Importance Index
- Open Access
- 1 July 2023
- Published by Interdisciplinary Publishing Academia in Journal of Civil Engineering Frontiers
- Vol. 4 (02) , 19-26
Application of Response Surface Methodology in Predicting and optimizing the properties of Concrete containing Ground Scoria and Metakaolin blended Cement in Concrete
The effect of Metakaolin and ground Scoria on various properties of concrete were investigated and optimised using Response Surfaces Methodology (RSM) in this study. Seven batches of concretes were cast at water to cement ratio of 0.5 and 5% fixed Metakaolin with 0, 5, 10, 15 and 20% Ground Scoria replaced cement. The resulting concrete then was tested for Slump. The Concrete cubes were cast and cured for 3, 7, 14, 28 and 60days before Water absorption and Compressive strength test were carried out. at all replacement levels of Metakaolin/Scoria content, Workability, Water absorption, Density and Compressive strength decreased when compared with the control concrete. However, Water absorption, Density and Compressive strength slightly increased with increase in curing age. The models developed were quite accurate as the percentages of error were in a good agreement and can explain the variability in Metakaolin/Ground Scoria concrete. Numerical method of optimisation was applied to determine the optimum mix proportions for Metakaolin/Ground Scoria. The optimum mix of concrete was obtained by addition of 8.60% GS after curing for 12-days with 0.8 desirability. Based on the result of optimisation, incorporating the optimum values of 13.6% (5%MK+8.6%GS) metakaolin and ground Scoria in concrete as cement substitute for every one kilogram of cement, can potentially result in reduction of CO2 emissions by 0.07-0.1224kg.
- 1 July 2023
- Published by Interdisciplinary Publishing Academia in Journal of Civil Engineering Frontiers
- Vol. 4 (02) , 19-26
Open AccessApplication of Response Surface Methodology in Predicting and optimizing the properties of Concrete containing Ground Scoria and Metakaolin blended Cement in Concrete
The effect of Metakaolin and ground Scoria on various properties of concrete were investigated and optimised using Response Surfaces Methodology (RSM) in this study. Seven batches of concretes were cast at water to cement ratio of 0.5 and 5% fixed Metakaolin with 0, 5, 10, 15 and 20% Ground Scoria replaced cement. The resulting concrete then was tested for Slump. The Concrete cubes were cast and cured for 3, 7, 14, 28 and 60days before Water absorption and Compressive strength test were carried out. at all replacement levels of Metakaolin/Scoria content, Workability, Water absorption, Density and Compressive strength decreased when compared with the control concrete. However, Water absorption, Density and Compressive strength slightly increased with increase in curing age. The models developed were quite accurate as the percentages of error were in a good agreement and can explain the variability in Metakaolin/Ground Scoria concrete. Numerical method of optimisation was applied to determine the optimum mix proportions for Metakaolin/Ground Scoria. The optimum mix of concrete was obtained by addition of 8.60% GS after curing for 12-days with 0.8 desirability. Based on the result of optimisation, incorporating the optimum values of 13.6% (5%MK+8.6%GS) metakaolin and ground Scoria in concrete as cement substitute for every one kilogram of cement, can potentially result in reduction of CO2 emissions by 0.07-0.1224kg.