Tritium Recovery Efficiency from an Array of PbLi Droplets in Vacuum
- 20 April 2017
- journal article
- research article
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 71 (4) , 575-583
Abstract
Quantitative feasibility analysis of the tritium recovery efficiency from multiple columns of liquid PbLi droplets was conducted.Then a case study based on the HCLL specification was performed. Main concern was whether the experimentally obtained recovery efficiency from a column of droplets is applicable for the efficiency estimation from the multiple columns of droplets without any mutual degrading effects. To maintaining a safe side assumption, the tritium once released and reabsorbed on another droplet was considered to be not re-emitted while falling. By the analogy with the thermal radiation theory, the view factor which expresses the intersection ratio of radiation on another surface was applied for the estimation.The dependences on nozzle design parameters, such as nozzle pitch, number of nozzles, chamber wall clearance, and exhaust port design, were investigated. Case study results suggest that, by choosing well-suited parameters approximately 40% to 60% of the single column recovery efficiency was secured for multiple columns even on the conservative condition. The release chamber exhaust port design had a major influence. Nozzle pitch and array design have less influences, but are not negligible. However, it has to be experimentally verified to the scale-size effects and experimental programs are currently underway.Keywords
This publication has 12 references indexed in Scilit:
- Feasibility analysis of vacuum sieve tray for tritium extraction in the HCLL test blanket systemFusion Engineering and Design, 2016
- Tritium management and anti-permeation strategies for three different breeding blanket options foreseen for the European Power Plant Physics and Technology Demonstration reactor studyFusion Engineering and Design, 2014
- Overview of EU DEMO design and R&D activitiesFusion Engineering and Design, 2014
- Tritium management and safety issues in ITER and DEMO breeding blanketsFusion Engineering and Design, 2013
- Enhanced Mass Transfer of Deuterium Extracted from Falling Liquid Pb-17Li DropletsFusion Science and Technology, 2013
- Vacuum sieve tray for tritium extraction from liquid Pb–17LiFusion Engineering and Design, 2012
- Modeling of In-Pile Experiments on Tritium Release from Molten Lithium-LeadJournal of Nuclear Science and Technology, 2002
- Tritium recovery from liquid metalsFusion Engineering and Design, 1995
- Tritium recovery from liquid metalsFusion Engineering and Design, 1995
- Tritium Recovery from Liquid Lithium-Lead by Vacuum DegassingNuclear Technology - Fusion, 1983