Oxygen Reduction Behavior of HDH TiH2 Powder during Dehydrogenation Reaction
Open Access
Abstract
In this study, oxygen reduction behavior of TiH2 powders during dehydrogenation process was investigated based on thermodynamics. During the hydrogenation–dehydrogenation (HDH) method to fabricate Ti powder, TiH2 was formed from a Ti sponge through hydrogenation annealing, and was easily pulverized even by ball milling due to its brittle nature. The ball milling process caused an increase in the oxygen concentration from 0.133 to 0.282 wt %, and transmission electron microscopy and X-ray photoelectron Spectroscopy results demonstrated that the formation of oxide layers such as TiO and TiO2 formed on the surface of the TiH2 powder resulted in the higher oxygen content. Dehydrogenation, which is the process originally conducted to eliminate hydrogen from TiH2, was used to remove and/or reduce oxygen, resulting in the reduction of the oxygen concentration from 0.282 to 0.216 wt %. Thermodynamic calculations confirmed the possibility of oxygen reduction by atomic hydrogen but molecular hydrogen has no function for the oxygen reduction. Glow discharge mass spectrometry (GD-MS) analysis, which checks H2O flow as an evidence of the oxygen reduction by hydrogen, supported the fact that the atomic hydrogen formed during the dehydrogenation process is able to play a critical role in decreasing the oxygen content.Keywords
Funding Information
- Korea Institute of Industrial Technology (EO-19-0007)
This publication has 23 references indexed in Scilit:
- Effect of cyclic heat treatment on commercially pure titanium part fabricated by electron beam additive manufacturingJournal of Alloys and Compounds, 2019
- Powder metallurgy of titanium – past, present, and futureInternational Materials Reviews, 2017
- New Developments of Ti-Based Alloys for Biomedical ApplicationsMaterials, 2014
- Electrochemical stability and corrosion resistance of Ti–Mo alloys for biomedical applicationsActa Biomaterialia, 2009
- Effect of traverse speed on abrasive waterjet machining of Ti–6Al–4V alloyMaterials & Design (1980-2015), 2007
- Design of powder metallurgy titanium alloys and compositesMaterials Science and Engineering: A, 2006
- The Use of β Titanium Alloys in the Aerospace IndustryJournal of Materials Engineering and Performance, 2005
- The technologies of titanium powder metallurgyJOM, 2004
- Titanium Alloys for Aerospace ApplicationsAdvanced Engineering Materials, 2003
- Ti–Al–V powder metallurgy (PM) via the hydrogenation–dehydrogenation (HDH) processJournal of Alloys and Compounds, 2003