Jang-Won Kang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jang-Won Kang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Hyung Giun Kim
Functional Materials and Components R&D Group, Korea Institute of Industrial Technology, Gangneung 25440, Republic of Korea
2 shared publications - Ki Beom Park
Gangwon Regional Division, Korea Institute of Industrial Technology, Gangneung 25440, Korea
2 shared publications - Tae-Wook Na
Functional Materials and Components R&D Group, Korea Institute of Industrial Technology, Gangneung 25440, Republic of Korea
2 shared publications - Bosung Seo
Gangwon Regional Division, Korea Institute of Industrial Technology, Gangneung-si 25440, Gangwon-do, Republic of Korea
1 shared publication - Byung Hak Choe
Department of Metal and Materials Engineering, Gangneung-Wonju National University, Gangneung 25457, Republic of Korea
1 shared publication - Hyo Kyu Kim
Gangwon Regional Division, Korea Institute of Industrial Technology, Gangneung 25440, Korea
1 shared publication
Latest Publications
- Open Access
Oxygen Reduction Behavior of HDH TiH2 Powder during Dehydrogenation Reaction
In this study, oxygen reduction behavior of TiH2 powders during dehydrogenation process was investigated based on thermodynamics. During the hydrogenation–dehydrogenation (HDH) method to fabricate Ti powder, TiH2 was formed from a Ti sponge through hydrogenation annealing, and was easily pulverized even by ball milling due to its brittle nature. The ball milling process caused an increase in the oxygen concentration from 0.133 to 0.282 wt %, and transmission electron microscopy and X-ray photoelectron Spectroscopy results demonstrated that the formation of oxide layers such as TiO and TiO2 formed on the surface of the TiH2 powder resulted in the higher oxygen content. Dehydrogenation, which is the process originally conducted to eliminate hydrogen from TiH2, was used to remove and/or reduce oxygen, resulting in the reduction of the oxygen concentration from 0.282 to 0.216 wt %. Thermodynamic calculations confirmed the possibility of oxygen reduction by atomic hydrogen but molecular hydrogen has no function for the oxygen reduction. Glow discharge mass spectrometry (GD-MS) analysis, which checks H2O flow as an evidence of the oxygen reduction by hydrogen, supported the fact that the atomic hydrogen formed during the dehydrogenation process is able to play a critical role in decreasing the oxygen content.
Open AccessOxygen Reduction Behavior of HDH TiH2 Powder during Dehydrogenation Reaction
In this study, oxygen reduction behavior of TiH2 powders during dehydrogenation process was investigated based on thermodynamics. During the hydrogenation–dehydrogenation (HDH) method to fabricate Ti powder, TiH2 was formed from a Ti sponge through hydrogenation annealing, and was easily pulverized even by ball milling due to its brittle nature. The ball milling process caused an increase in the oxygen concentration from 0.133 to 0.282 wt %, and transmission electron microscopy and X-ray photoelectron Spectroscopy results demonstrated that the formation of oxide layers such as TiO and TiO2 formed on the surface of the TiH2 powder resulted in the higher oxygen content. Dehydrogenation, which is the process originally conducted to eliminate hydrogen from TiH2, was used to remove and/or reduce oxygen, resulting in the reduction of the oxygen concentration from 0.282 to 0.216 wt %. Thermodynamic calculations confirmed the possibility of oxygen reduction by atomic hydrogen but molecular hydrogen has no function for the oxygen reduction. Glow discharge mass spectrometry (GD-MS) analysis, which checks H2O flow as an evidence of the oxygen reduction by hydrogen, supported the fact that the atomic hydrogen formed during the dehydrogenation process is able to play a critical role in decreasing the oxygen content.
- Open Access
Preparation of Spherical Mo5Si3 Powder by Inductively Coupled Thermal Plasma Treatment
A method was developed to fabricate spherical Mo5Si3 powder by milling and spheroidizing using inductively coupled thermal plasma. A Mo5Si3 alloy ingot was fabricated by vacuum arc melting, after which it was easily pulverized into powder by milling due to its brittle nature. The milled powders had an irregular shape, but after being spheroidized by the thermal plasma treatment, they had a spherical shape. Sphericity was increased with increasing plasma power. After plasma treatment, the percentage of the Mo3Si phase had increased due to Si evaporation. The possibility of Si evaporation was thermodynamically analyzed based on the vapor pressure of Mo and Si in the Mo5Si3 liquid mixture. By this process, spherical Mo silicide powders with high purity could be fabricated successfully.
Open AccessPreparation of Spherical Mo5Si3 Powder by Inductively Coupled Thermal Plasma Treatment
A method was developed to fabricate spherical Mo5Si3 powder by milling and spheroidizing using inductively coupled thermal plasma. A Mo5Si3 alloy ingot was fabricated by vacuum arc melting, after which it was easily pulverized into powder by milling due to its brittle nature. The milled powders had an irregular shape, but after being spheroidized by the thermal plasma treatment, they had a spherical shape. Sphericity was increased with increasing plasma power. After plasma treatment, the percentage of the Mo3Si phase had increased due to Si evaporation. The possibility of Si evaporation was thermodynamically analyzed based on the vapor pressure of Mo and Si in the Mo5Si3 liquid mixture. By this process, spherical Mo silicide powders with high purity could be fabricated successfully.