Experimental-numerical insights into heat-affected zone failure of welded aluminum alloys
Authors:
Open Access
- 21 February 2026
- journal article
- research article
- Published by Springer Nature in Welding in the World
- Vol. 70 (11) , 1-21
Abstract
This research elucidates the failure mechanisms of the heat-affected zone in welded aluminum alloys. Heat-affected zone softening, which leads to localized loss of strength and hardness, is a significant issue in welded aluminum components. This issue prevents the welded components from achieving their full load capacity, leading to premature failure in their heat-affected zone, despite acceptable weld quality. Accordingly, this study investigates the failure mechanisms of the heat-affected zone in non-heat-treatable 5754-H22 and heat-treatable 6082-T6 aluminum alloys. Samples are welded with different welding processes and heat inputs to clarify the influence of the welding procedure on the failure mechanism. Microstructural analyses, simulated thermal gradients using finite element, CALPHAD, and strength analytical approaches were employed to investigate the softening phenomenon. According to the results, the softening in the non-heat-treatable base metal was mainly due to dislocation recovery, while precipitation coarsening caused softening in the heat-treatable base metal. Tensile tests conducted in conjunction with digital image correlation revealed that the mechanical behavior of the welded joints followed that of their softened heat-affected zone. Furthermore, hardness-strength and stress-plastic strain empirical models were capable of predicting the deformation behavior of softened heat-affected zones, and thus, welded aluminum structures. However, the model parameters need to be adjusted for each specific base metal. Finally, autogenous laser welding showed reduced softening. However, it led to undercut defects and premature failure due to the absence of filler material, suggesting that using filler material in laser welding could be a viable solution to reduce softening in aluminum alloys.Keywords
Funding Information
- Business Finland
- LUT University (previously Lappeenranta University of Technology
This publication has 47 references indexed in Scilit:
- A through-process modelling approach of aluminium heat-affected zone softening and weld joint performanceThe International Journal of Advanced Manufacturing Technology, 2025
- Prediction of Flow Behavior and Deformation Analysis of AA5754 Sheet Metal at Warm and Hot TemperaturesJournal of Materials Engineering and Performance, 2023
- New GTAW variant for high-throughput aluminum weldingWelding in the World, 2018
- HAZ softening behavior of strain-hardened Al-6.7Mg alloy welded by GMAW and pulsed GMAW processesThe International Journal of Advanced Manufacturing Technology, 2017
- Recent developments in joining of aluminum alloysThe International Journal of Advanced Manufacturing Technology, 2016
- Aluminium Alloys for Aerospace Applications2016
- The Influence of Grain Size Determination Method on Grain Growth Kinetics AnalysisAdvanced Engineering Materials, 2015
- Aluminum and Aluminum Alloys2011
- Influence of severe plastic deformations on secondary phase precipitation in a 6082 Al-Mg-Si alloyMetallurgical and Materials Transactions A, 2005
- Recovery of high temperature deformed Ni-Al alloysJournal of Materials Science, 1972