Advanced surface characterization of silver nanocluster segregation in Ag–TiCN bioactive coatings by RBS, GDOES, and ARXPS
- 31 May 2013
- journal article
- research article
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 405 (19) , 6259-6269
Abstract
Surface modification by means of wear protective and antibacterial coatings represents, nowadays, a crucial challenge in the biomaterials field in order to enhance the lifetime of bio-devices. It is possible to tailor the properties of the material by using an appropriate combination of high wear resistance (e.g., nitride or carbide coatings) and biocide agents (e.g., noble metals as silver) to fulfill its final application. This behavior is controlled at last by the outmost surface of the coating. Therefore, the analytical characterization of these new materials requires high-resolution analytical techniques able to provide information about surface and depth composition down to the nanometric level. Among these techniques are Rutherford backscattering spectrometry (RBS), glow discharge optical emission spectroscopy (GDOES), and angle resolved X-ray photoelectron spectroscopy (ARXPS). In this work, we present a comparative RBS–GDOES–ARXPS study of the surface characterization of Ag–TiCN coatings with Ag/Ti atomic ratios varying from 0 to 1.49, deposited at room temperature and 200 °C. RBS analysis allowed a precise quantification of the silver content along the coating with a non-uniform Ag depth distribution for the samples with higher Ag content. GDOES surface profiling revealed that the samples with higher Ag content as well as the samples deposited at 200 °C showed an ultrathin (1–10 nm) Ag-rich layer on the coating surface followed by a silver depletion zone (20–30 nm), being the thickness of both layers enhanced with Ag content and deposition temperature. ARXPS analysis confirmed these observations after applying general algorithm involving regularization in addition to singular value decomposition techniques to obtain the concentration depth profiles. Finally, ARXPS measurements were used to provide further information on the surface morphology of the samples obtaining an excellent agreement with SEM observations when a growth model of silver islands with a height d = 1.5 nm and coverage θ = 0.20 was applied to the sample with Ag/Ti = 1.49 and deposited at room temperature. SEM micrograph of silver nanocluster surface segregation on bioactive AgTiCN coatings as analyzed by a) GDOES, b) RBS, and c) ARXPS depth profilesKeywords
This publication has 36 references indexed in Scilit:
- Ag–Ti(C, N)-based coatings for biomedical applications: influence of silver content on the structural propertiesJournal of Physics D: Applied Physics, 2011
- Surface characterization of Ti-Si-C-ON coatings for orthopedic devices: XPS and Raman spectroscopySolid State Sciences, 2011
- Antimicrobial nanomaterials for water disinfection and microbial control: Potential applications and implicationsWater Research, 2008
- Silver diffusion and high-temperature lubrication mechanisms of YSZ–Ag–Mo based nanocomposite coatingsComposites Science and Technology, 2007
- The bactericidal effect of silver nanoparticlesNanotechnology, 2005
- Interfacial effects during the analysis of multilayer metal coatings by radio-frequency glow discharge optical emission spectroscopy : Part 1. Crater shape and sputtering rate effectsJournal of Analytical Atomic Spectrometry, 2005
- Radio-frequency glow discharge spectrometry:Spectrochimica Acta Part B: Atomic Spectroscopy, 2004
- The influence of substrate temperature, substrate material and heat treatment on the micro structure of Ag/Si nanocomposite films prepared by r.f. co-sputteringMaterials Science and Engineering: A, 1997
- Segregation effects in Ag-Si compositesMaterials Letters, 1995
- Compositional depth profiling by sputteringProgress in Surface Science, 1991