A reciprocity calibration of hydrophones in a non-anechoic water tank: Method and realization
Authors:
- 1 January 2025
- journal article
- research article
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 157 (1) , 256-264
Abstract
To measure the electroacoustic parameters of transducers in the continuous sound field in a limited water area, a reciprocity calibration method of hydrophones using a spatial sampling average method in a non-anechoic tank was developed. The sound propagation in the non-anechoic tank under the impedance boundary condition, with a sound source producing continuous sound, is introduced based on the Helmholtz equation and Green's function. The reciprocity constant is given using the spatial sampling average sound pressure, and the three-transducer reciprocity calibration procedure was established. The number of spatial sampling points, which must be not less than 6000, and the sampling configuration in the non-anechoic tank are determined. In the non-anechoic tank of 15 m × 9 m × 6 m, the sensitivity of the hydrophone in the frequency range of 250 Hz to 10 kHz was calibrated, and the largest discrepancy between the measurement results from the reciprocity calibration method in the non-anechoic water tank and the standard facility was 0.7 dB.Keywords
This publication has 15 references indexed in Scilit:
- CCAUV.W-K2 final report - key comparison CCAUV.W-K2: calibration of hydrophones in the frequency range from 250 Hz to 500 kHzMetrologia, 2022
- Source spatial averaging for the sensitivity measurement of multiple hydrophones in a tankApplied Acoustics, 2021
- Calibration of hydrophones using a frequency domain filter processing method: theory and experimentMeasurement Science and Technology, 2020
- Signal-modelling methods applied to the free-field calibration of hydrophones and projectors in laboratory test tanksMeasurement Science and Technology, 2018
- Reverberation time measuring methodsThe Journal of the Acoustical Society of America, 2008
- Position and time-delay calibration of transducer elements in a sparse array for underwater ultrasound imagingIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2006
- Underwater acoustic noise measurement in test tanksIEEE Journal of Oceanic Engineering, 2000
- Transducer transmitting sensitivity measurements in restricted environmentsUltrasonics, 2000
- Estimating the parameters of exponentially damped sinusoids and pole-zero modeling in noiseIEEE Transactions on Acoustics, Speech, and Signal Processing, 1982
- Reciprocity Calibration of Microphones in a Diffuse Sound FieldThe Journal of the Acoustical Society of America, 1961