Chemical Bonding Interface Enables Lithium Batteries to Operate Under Near‐Vacuum Conditions
Open Access
- 20 September 2026
- journal article
- research article
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (40) , e71584
Abstract
The reliance on high stack pressure in lithium metal batteries (LMBs) conflicts with the requirements of lightweight design and low‐pressure operating environments, motivating the development of pressure‐independent battery designs. Here, a chemical bonding interfacial prototype is proposed to substitute the physical contact interface, thereby liberating LMBs from high stacking pressures. This chemical bonding interface is constructed via strong interactions between the carbonyl groups of poly(ε‐caprolactone) segments and Li metal, manifesting as Li─O bonding interfaces. Benefiting from Li─O bonding, the PPE electrolyte exhibits a high adhesion energy of 22.44 J m −2 and a high lap shear strength of 0.31 MPa, sustaining intimate electrode–electrolyte contact without external stack pressure. In addition, the Li─O bonding interface significantly reduces the thickness of the electric double layer, achieving a 120% increase in capacitance (0.20 µF cm −2 ), thus promoting efficient transport (t Li+ = 0.7) and uniform deposition of Li + . As a result, the Li||Cu half‐cell equipped with PPE electrolyte achieves a superior coulombic efficiency of 99.78%. A pouch cell equipped with PPE electrolyte and NCM cathode demonstrates high capacity retention of 90.12% after 40 cycles at −0.1 MPa (relative to standard atmospheric pressure). This discovery offers novel insights into material and structural design for pressure‐insensitive batteries intended for high‐altitude aerospace applications.Keywords
Funding Information
- National Natural Science Foundation of China (52571240)
- National Natural Science Foundation of China (52471059)
- National Natural Science Foundation of China (52374375)
This publication has 25 references indexed in Scilit:
- A Gradient Nanodomain High‐Entropy Polymer Electrolyte Tape for Pressure‐Free Solid‐State Lithium BatteriesAdvanced Materials, 2026
- High‐Strength Ultrathin Solid‐State Electrolyte with Ion‐Rectifying Honeycomb‐Like Skeleton for Lithium Metal Batteries Free from External PressureAdvanced Functional Materials, 2025
- Salt‐Segregated Solid Polymer Electrolytes for High‐Rate Solid‐State Lithium BatteriesAdvanced Materials, 2025
- Dielectric‐Tailored Space Charge Layer and Ion Coordination Structure for High‐Voltage Polymer All‐Solid‐State Lithium BatteriesAdvanced Materials, 2025
- Scalable Interfacial Engineering with Lithiophilic‐Lithiophobic Layers for High‐Performance All‐Solid‐State Li‐Metal BatteriesAdvanced Functional Materials, 2025
- Challenges and Strategies of Low‐Pressure All‐Solid‐State BatteriesAdvanced Materials, 2024
- A Tetrahydropyran‐Based Weakly Solvating Electrolyte for Low‐Temperature and High‐Voltage Lithium Metal BatteriesAdvanced Energy Materials, 2024
- Hybrid Co‐Solvent‐Induced High‐Entropy Electrolyte: Regulating of Hydrated Zn 2+ Solvation Structures for Excellent Reversibility and Wide Temperature AdaptabilityAdvanced Energy Materials, 2024
- Design of High‐Entropy Tape Electrolytes for Compression‐Free Solid‐State BatteriesAdvanced Materials, 2023
- Phase‐Changeable Dynamic Conformal Electrode/electrolyte Interlayer enabling Pressure‐Independent Solid‐State Lithium Metal BatteriesAdvanced Materials, 2023