Effectively enhanced structural stability and electrochemical properties of LiNi0.5Mn1.5O4cathode materialsviapoly-(3,4-ethylenedioxythiophene)-in situcoated for high voltage Li-ion batteries
Open Access
- 22 January 2019
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (6) , 3081-3091
Abstract
Spinel LiNi0.5Mn1.5O4 shows promise as a potential candidate for Li-ion batteries due to its high energy density and high rate performance. However, LiNi0.5Mn1.5O4 (LNMO) spinel oxides usually deliver poor cycle life because of the increasing impedance and gradually dissolving Mn resulting in the destruction of crystal structure. Here, a conductive polymer poly-(3,4-ethylenedioxythiophene) (PEDOT) surface modified strategy is introduced to settle the above challenges. The main purpose is to construct a uniform and dense shell film on the surface of LiNi0.5Mn1.5O4 (Industrial Grade), which is prepared by a simple chemical in situ oxidative polymerization method. The Mn dissolving from the lattice during the long-term cycling is well inhibited as the polymer shell protects LiNi0.5Mn1.5O4 from direct exposure to the highly active electrolyte. As expected, the 3 wt% poly-(3,4-ethylenedioxythiophene) coated sample reveals long cycle life with acceptable capacity of 114.5 mA h g−1 and high capacity retention of 91.6% after 200 cycles, compared to 70.9 mA h g−1 and 56.5%, respectively, for the bare LiNi0.5Mn1.5O4 sample. Furthermore, the coated sample demonstrates a higher capacity of 110 mA h g−1 and 63 mA h g−1 at 5C and 10C rate respectively. The improved performance is believed to be attributed to the formation of high conductivity and stable interface structure between electrolyte and LNMO, which is beneficial to suppress the destruction of crystalline structure due to the Mn dissolution and undesired side-reaction between electrolyte and LiNi0.5Mn1.5O4 in long cycle, and improve simultaneously the conductivity and interface stability of LiNi0.5Mn1.5O4 for high voltage lithium-ion batteries.Keywords
Funding Information
- National Natural Science Foundation of China (21875282)
- Natural Science Foundation of Hunan Province (2018JJ3595)
- China Postdoctoral Science Foundation (2018M633664)
This publication has 54 references indexed in Scilit:
- Spinel LiNi0.5Mn1.5O4 as superior electrode materials for lithium-ion batteries: Ionic liquid assisted synthesis and the effect of CuO coatingElectrochimica Acta, 2014
- A novel electrolyte with the ability to form a solid electrolyte interface on the anode and cathode of a LiMn2O4/graphite batteryJournal of Materials Chemistry A, 2013
- An Artificial Solid Electrolyte Interphase Enables the Use of a LiNi0.5 Mn1.5 O4 5 V Cathode with Conventional ElectrolytesAdvanced Energy Materials, 2013
- Li3V2(PO4)3/Conducting Polymer as a High Power 4 V‐Class Lithium Battery ElectrodeAdvanced Energy Materials, 2013
- Electrochemical performance and thermal stability of GaF3-coated LiNi0.5Mn1.5O4 as 5 V cathode materials for lithium ion batteriesJournal of Materials Science, 2012
- High rate micron-sized niobium-doped LiMn1.5Ni0.5O4 as ultra high power positive-electrode material for lithium-ion batteriesJournal of Power Sources, 2012
- A polymer electrolyte-skinned active material strategy toward high-voltage lithium ion batteries: a polyimide-coated LiNi0.5Mn1.5O4 spinel cathode material caseEnergy & Environmental Science, 2012
- Nano-silicon composites using poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) as elastic polymermatrix and carbon source for lithium-ion battery anodeJournal of Materials Chemistry, 2011
- Simultaneous synthesis of gold nanoparticles and conducting poly(3,4‐ethylenedioxythiophene) towards optoelectronic nanocompositesPhysica Status Solidi (a), 2008
- Materials' effects on the elevated and room temperature performance of CLiMn2O4 Li-ion batteriesJournal of Power Sources, 1997