Towards a traceable divider for composite voltage waveforms below 1 kV
Open Access
- 9 August 2021
- journal article
- research article
- Published by Springer Nature in Electrical Engineering
- Vol. 104 (2) , 1121-1130
Abstract
In the framework of the European Project 19NRM07 HV-com2 supporting the standardization in high-voltage testing with composite and combined wave shapes, a divider to employ in a test set-up for validation of electrical devices submitted to composite voltages below 1 kV has been developed at the Istituto Nazionale di Ricerca Metrologica (INRIM) and currently is under extensive testing. After a simulation stage, an available divider has been modified to comply with the IEC 60,060 requirements in terms of step response and scale factor. To be suitably fast in replying to step voltages, an adjustment of the components of the low-voltage arm has been made. The divider has been calibrated with traceability to the relevant INRIM National Standards and characterized exploiting its scale factor at different voltages and frequencies. The divider has been then inserted in a set-up with a sinusoidal generator, an impulse generator and coupling–blocking elements to carry out tests at low voltages (below 1 kV) with single voltages. In these tests, the divider showed a satisfactory attitude as converting device and its scale factor is traceable with suitable uncertainty.Keywords
Funding Information
- European Metrology Programme for Innovation and Research (19NRM07 HV-Com2)
- Istituto Nazionale di Ricerca Metrologica
This publication has 16 references indexed in Scilit:
- Development of Precision DC High-Voltage DividersIEEE Transactions on Instrumentation and Measurement, 2011
- The construction of a DC high voltage precision dividerJournal of Electrostatics, 2009
- Precision High-Voltage DC Dividers and Their CalibrationIEEE Transactions on Instrumentation and Measurement, 2005
- ON THE IN-USE UNCERTAINTY OF AN INSTRUMENT2004
- Automated DC voltage divider to calibrate voltages up to 1 kV2002
- Development of national standard class reference divider for impulse voltage measurements1999
- Automated voltage divider to calibrate a 10-V output of Zener voltage standardIEEE Transactions on Instrumentation and Measurement, 1991
- A new precision AC resistance dividerIEEE Transactions on Instrumentation and Measurement, 1988
- Development of a high voltage universal dividerIEEE Transactions on Power Apparatus and Systems, 1976
- Precision Capacitive Voltage Divider for Impulse Voltagge MeasurementsIEEE Transactions on Power Apparatus and Systems, 1972