Abstract
Power modules are the core components of the powertrain of hybrid and battery electric vehicle (EV) and has a significant impact on system performance and reliability. Conventional single-sided cooled (SSC) wire-bonded power modules have limitation to utilize the benefits offered by new generations of silicon carbide (SiC) devices due to higher parasitic inductance and heat dissipation issues. Planar, low-profile, double-sided cooled (DSC) power modules are emerging in inverters of EV powertrain to address the limitations of conventional SSC modules. However, there is a reliability concern introduced by the rigid interconnection between the device chips and two substrates of the DSC power module. In this article, design, and development of a double-sided cooled, 1200V/150A SiC half-bridge split phase power module has been presented, where flexible compressible pins called “fuzz buttons” are used in a low-profile PCB board to realize die top side connection. Our simulation result shows a 45% reduction of thermomechanical stress at the interposer-dies interface with a total power loss of 1300W (200 W/SiC MOSFET and 125 W/SiC Schottky Diode). The feature of double-sided cooling helps to reduce the maximum junction temperature of the dies by 26%, compared to the single sided cooling. Moreover, vertical commutation loop and utilization of copper layer in PCB based fuzz button retainer board helps to achieve a power loop inductance as low as 1.51 nH.

This publication has 49 references indexed in Scilit: