AMAbdul Basit Mirza

Abdul Basit Mirza

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Abdul Basit Mirza has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Powering the Sea: Challenges and Trends in Tidal Energy Integration, Power Converter Technology, and the Path Forward

    by Deepi Singh, Abdul Muneeb, Shreepooja Singh, Kushan Choksi, Abdul Basit Mirza, Fang Luo

    The global demand for sustainable energy has shifted interest in Marine Renewable Energy (MRE) sources. Tidal energy is particularly attractive within this domain due to its predictability and high capacity factors. However, practical and large-scale deployment remains constrained by challenges in resource variability, subsea reliability, and grid compliance. This review provides a focused and comprehensive assessment of tidal energy systems, with particular emphasis on Power Electronic Converters (PECs) as the pivotal enabler of efficient energy extraction, control, and grid integration. A structured challenge– mitigation framework is developed across three domains—resource assessment, converter topologies, and grid interaction—revealing unresolved issues in long-term reliability, converter robustness, and system-level stability. Forward-looking research directions are also identified, including hybrid tidal–renewable integration, modular and multiport PEC architectures, and advanced monitoring frameworks, all of which are expected to accelerate technology readiness and support cost-effective scaling. This review offers a roadmap for transitioning tidal energy toward dependable, cost-effective, and sustainable expansion by bridging insights across the resource, converter, and grid domains.


  • Co-Design Framework for High Power, Medium-/High-Voltage WBG Power Modules: Case Study With 3.3-kV/200-A Wire-Bonded Low-Inductance SiC Half-Bridge Module

    by Yang Li, Shiyue Deng, Yuxuan Wu, Mustafeez- Ul- Hassan, Yang Xie, Abdul Basit Mirza, Deepi Singh, Fang Luo, Amol Deshpande, Jack Flicker

    This paper proposed a co-design framework for high power high voltage wide bandgap (WBG) power module packaging that is generalized to reflect diverse design requirements across device technologies, packaging configurations, and voltage classes. Beyond the commonly addressed thermal, electrical, and mechanical multidisciplinary co-optimization, the proposed framework specially emphasizes considerations for medium/high voltage (MV/HV) designs, introduces the concept of Packaging and Assembly Process Development Kit (PA-PDK) and integrates “Design for Reliability (DfR)” in the development process for power module packaging. The effectiveness of the co-design framework is validated through case study with a 3.3 kV/200 A wire-bonded, low-inductance, silicon carbide (SiC) half-bridge module, which serves as a reference for the implementation of such co-design framework.


  • Modeling and Optimization of Near-Field Coupling Between Power Loop and Gate Drive in High-Density Bidirectional Converters

    by Yuxuan Wu, Kushan Choksi, Samuel Defaz, Abdul Basit Mirza, Fang Luo

    With the advent of wide-bandgap devices, power converters are achieving higher performance switching capabilities. As a result, manufacturers are increasingly focused on reducing the complexity of power converters and enhancing the production and assembly process by transitioning from modular to highly integrated designs, which are high-density bidirectional converters (HDBCs). As a result, near-field (NF) coupling is becoming a concern for stable operation in HDBCs. Optimization for the power loop and gate drive (GD) can be achieved through computational electromagnetics tools and circuit simulators, allowing for a detailed visualization of NF distributions. In addition, the GD impedance can be fine-tuned by optimizing the gate-source trace layout, while near-electric field coupling must be considered when implementing a shielding layer between the GD and high $\text{d}\mathbf {v}/\text{d}\mathbf {t}$ nodes. This work presents a workflow for GD and power loop NF coupling modeling and optimization in HDBCs, aimed at mitigating issues such as mistriggering of switching devices and electromagnetic interference concerns in low-voltage systems.


  • Impact of PCB Parasitic Capacitance on Switching Transients in Chopper and Half-Bridge Configurations Utilizing TO-247 SiC Devices

    by Abdul Basit Mirza, Andrew Castiblanco, Abdul Muneeb, Yang Xie, Sama Salehi Vala, Fang Luo

    Silicon Carbide (SiC) MOSFETs and Schottky diodes in the TO-247 package are economical options for chopper (buck/boost) and half-bridge configurations, which are fundamental building blocks for various power converter topologies. However, the fast switching of SiC implies high \boldmath $\rm{d}v/\rm{d}t$ and \boldmath $\rm{d}i/\rm{d}t$, imposing a constraint on the PCB portion of power loop inductance in minimizing voltage overshoot during the turn-OFF transient. Although the vertical PCB power loop layout effectively reduces the PCB loop inductance, it increases the PCB parasitic capacitance. Due to the considerable lead inductance of the TO-247 package, this PCB capacitance is paralleled to the device's output capacitance through the package lead inductance, altering the switching transient. This article analyzes the effect of PCB capacitance on turn-OFF switching transient and ringing in chopper and half-bridge configurations with SiC devices in the TO-247 package. Initially, small-signal models incorporating PCB capacitance are derived. Subsequently, these models are validated in the frequency domain, and the switching transients are compared through double pulse test (DPT) on two PCB prototypes with the same layout but different stack-ups, yielding different PCB capacitances. Further, a comparative study of the proposed models with direct parallel approximation of PCB and device output capacitance is presented. Finally, the proposed small-signal models are analyzed to establish criteria, in terms of TO-247 lead and PCB loop inductance, for minimizing the impact of PCB capacitance on switching transients.


  • Multitime-Scale Digital Twin for Health and Fault Monitoring of a Boost Converter

    by Kushan Choksi, Masayuki Hijikata, Abdul Basit Mirza, Austin Zhou, Deepi Singh, Fang Luo

    Component degradation in power electronic converters poses a serious threat to system reliability. This degradation is linked to the health of individual components, potentially causing a butterfly effect that leads to reduced lifespan or faults in the power electronic system. This article presents a multi-time scale digital twin-based condition monitoring approach, featuring enhanced pseudo-heuristic health monitoring and pattern recognition-based fault monitoring, demonstrated in a boost converter application. The proposed concept utilizes the application of condition monitoring using top switch/diode voltage and inductor current for improved health estimation and faster fault detection. It should be noted that the degradation of device on resistance Rds,on and inductor series resistance RL similarly impacts inductor current and output voltage, making it challenging to monitor individual degradation. This paper comprehensively analyzes different types of faults and experimentally validates on a low-voltage SiC-based converter prototype. The proposed fault monitoring algorithm is independent of operating conditions and sensor integrity issues, as the significant pulsating voltages across the device provide patterns with enough tolerance for robust fault monitoring, thereby enhancing fault detection compared to the inductor/switch current threshold-based fault detection algorithm in the existing literature. Lastly, the paper delves into design consideration and challenges related to adding a voltage sensor across the top device and associated control complexities.


  • Investigation of Reflected Wave Phenomenon in SiC-Based Two-Level Split-Phase Inverter-Fed Motor Drives

    by Abdul Basit Mirza, Kushan Choksi, Sama Salehi Vala, Ali Anwar, Fang Luo

    Fast switching speed of silicon carbide (SiC) exacerbates reflected wave phenomenon (RWP) in two-level (2L) voltage source inverter (VSI)-based motor drives, causing motor side overvoltage and drive side overcurrent. The 2L split-phase (2L-SP) topology shows prospects of alleviating RWP due to its lower output $\text{d}v/\text{d}t$ facilitated by split-inductors which also serve as an output reactor. This article explores RWP in a 2L-SP-based motor drive and compares it with the 2L with an output reactor, denoted as 2L-LF. For the study, a 2L, 2L-LF, and 2L-SP configurable 18-kVA SiC-based prototype is developed and interfaced to an emulated motor load through a bundled shielded cable. At first, simplified lumped differential mode (DM) equivalent circuits are derived for modeling RWP transients in 2L-LF and 2L-SP drives. Subsequently, RWP is investigated through double pulse tests (DPT) for various cable lengths, reactor (2L-LF), and split inductor (2L-SP) values. Results show that 2L-SP exhibits lower RWP for longer cables, achieving up to 68% and 73% reduction in overvoltage and overcurrent amplitudes for an 8 m cable. An anomalous rising overvoltage pattern for short cables is observed for both drive configurations and analyzed using proposed DM equivalent circuits. Further, from a switching performance standpoint, split-inductors in 2L-SP decouple load and complementary cell's parasitics from the device during switching, achieving 17% lower switching loss than 2L-LF. Following the DPTs, continuous three-phase tests are performed for 8 m cable for both drive configurations. The 2L-SP drive achieves up to 60% and 74% reduction in overvoltage and overcurrent amplitudes than 2L-LF. Overall, 2L-SP outperforms 2L-LF in mitigating RWP in SiC-based 2L VSI motor drives.


  • Top Cited Papers

    High-Power Electronic Applications Enabled by Medium Voltage Silicon-Carbide Technology: An Overview

    by Morten Rahr Nielsen, Shiyue Deng, Abdul Basit Mirza, Benjamin Futtrup Kjærsgaard, Asger Bjørn Jørgensen, Hongbo Zhao, Yang Li, Stig Munk-Nielsen, Fang Luo

    With the electrification of society and the green transition, the need for efficient high-power electronic converters to support the electricity demand is at an all-time high. A key enabler is the emerging medium voltage (MV) silicon-carbide (SiC) semiconductor devices, which offer improved static and dynamic performance compared to their silicon-counterparts. This article presents a thorough overview of the recent advancements within the MV SiC technology, examining both available semiconductor devices and power modules from industry and academia and directly associates them to their applicability through a comprehensive review of typical high-power electronic applications. At last, the future perspectives on the applicability and commercial widespread of the MV SiC technology are presented.


  • Simplified Analytical Modeling of Reflected Wave Transients in Cable-Connected VSI-Based Motor Drives With Output Reactor

    by Abdul Basit Mirza, Sama Salehi Vala, Kushan Choksi, Fang Luo

    This letter proposes a simplified lumped analytical model to investigate reflected wave phenomenon (RWP) in a two-level voltage source inverter-based motor drive with an output reactor. RWP causes motor side overvoltage and drive side overcurrent. The output reactor at the drive side is a preferred RWP mitigation approach for its simplicity. However, existing RWP modeling approaches, for reactor design purposes, rely on complex cable and motor circuit models, requiring time-consuming simulations or are oversimplified, neglecting motor impedance and drive's output slew rate $\text{d}v/\text{d}t$ . To address this, the proposed model incorporates a condensed motor model and a ramp edge source for the drive output. It is solved to obtain closed-form expressions for estimating the slew rate of overvoltage and overcurrent transients and their respective peak values. Finally, the derived expressions are validated through double pulse tests on a silicon carbide-based hardware prototype for different cable lengths and reactor values.


  • Investigation of Reflected Wave Phenomenon in WBG-Driven Aircraft Power System

    by Kushan Choksi, Masayuki Hijikata, Yuxuan Wu, Mustafeez- Ul- Hassan, Deepi Singh, Abdul Basit Mirza, Bo Liu, Xin Wu, Fang Luo

    The rise of wide band gap (WBG) technologies has led to rise in the electrification of aircraft systems for a sustainable future with lower costs encouraged by favorable governmental policies. While WBG is efficient, it introduces over-voltages due to impedance mismatches, risking motor and cable failure. Moreover, this surge in aircraft electrification stresses electrical wiring interconnect systems (EWIS). This research focuses on the length and frequency-extendable modeling of aircraft cables. The proposed cable model includes the characterization of high-frequency (HF) phenomena such as skin and proximity effect, mutual coupling, and common-mode (CM) parasitic elements. CM parasitic are crucial due to inconsistencies in grounding/shielding approaches, and cable layouts. Furthermore, with the advent of protection and monitoring requirements at the ends of cables serving as ’unavoidable additional impedance network’ (lead wires), this paper studies the impact of infrastructural parasitic and the added impedance network on reflected wave modeling. Notably, this paper provides an improved average approximation of the load overvoltage incorporating the impact of lead wires, varying d v /d t of WBG devices, and cable length. Lastly, the study concludes with a rigorous combination of experimentation and simulations, ensuring a comprehensive comparative analysis to validate the effectiveness of the proposed modeling approach.