Influence of T6 heat Treatment on the Mechanical Properties of AA7075 and AA7020 alloys
Open Access
- 22 June 2023
- book chapter
- Published by Özgür Yayınları
- p. 1-16
Abstract
The AA7075 and AA7020 alloys were prepared using a vacuum melting furnace and a casting furnace. Mechanical properties of the alloy samples were investigated as-cast and under heat-treated conditions. To investigate the effect of heat treatment, numerous designed AA7075 and AA7020 samples were homogenized (solution process) in two steps (300 oC/12h+475 oC/12h) and then aged under different regimes. The mechanical properties of microhardness (HV), ultimate tensile strength (σUTS), tensile yield strength (σTYS), compressive yield strength (σCYS) and Young's modulus (E) were measured to investigate the effect of heat treatment on mechanical properties. Both alloy systems (AA7075 and AA7020) were compared both within themselves and with each other in terms of mechanical properties depending on how they were subjected to the heat treatment. Depending on the applied heat treatments, 7075 alloy exhibited superior mechanical properties compared to 7020 alloy. A good combination of high microhardness and reasonable tensile strength has been achieved for both alloy systems by sequential and appropriate heat treatment. While the peak sUTS value reached for the AA7075 alloy was 425 MPa (regime 3), it was determined as 320 MPa (regime 2) for the AA7020 alloy. After the aging process at 150 oC/24h (regime 2) applied proceeding the homogenization process, the peak HV and sCYS values for AA7020 alloy were achieved as 1235 MPa and 321.6 MPa, respectively.Keywords
This publication has 207 references indexed in Scilit:
- Evaluation of MQL performances using various nanofluids in turning of AISI 304 stainless steelThe International Journal of Advanced Manufacturing Technology, 2021
- Using a Multi-view Convolutional Neural Network to monitor solar irradianceNeural Computing and Applications, 2021
- Industrial wearable system: the human-centric empowering technology in Industry 4.0Journal of Intelligent Manufacturing, 2018
- Investigation of surface integrity in dry machining of Inconel 718The International Journal of Advanced Manufacturing Technology, 2013
- Inhaled corticosteroids for subacute and chronic cough in adultsCochrane Database of Systematic Reviews, 2013
- An expert-based approach to forest road network planning by combining Delphi and spatial multi-criteria evaluationEnvironmental Monitoring and Assessment, 2012
- Large-scale wind turbine blade design and aerodynamic analysisChinese Science Bulletin, 2011
- Double aging and thermomechanical heat treatment of AA7075 aluminum alloy extrusionsJournal of Materials Science, 2009
- Horizontal axis wind turbine systems: optimization using genetic algorithmsWind Energy, 2001
- Confined concrete model under cyclic loadMaterials and Structures, 1997