Hasan Kaya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hasan Kaya has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Uğur Büyük
Erciyes Universitesi
17 shared publications - Emin Çadırlı
Niğde Ömer Halisdemir Üniversitesi
16 shared publications - Erkan Üstün
Niğde Ömer Halisdemir University
10 shared publications - Hakan Çandar
Department of Mechanical Engineering, Engineering Faculty, Gaziantep University, Gaziantep 27310, Türkiye
7 shared publications - Omer Eyercioglu
Universidad de Gaziantep (Turquia)
7 shared publications - Zihni Alp Çevik
Department of Electronic and Automation, Besni Ali Erdemoğlu Vocational School, Adıyaman University, Adıyaman 02302, Turkey
7 shared publications
Latest Publications
- Open Access
- 26 June 2025
- Published by Özgür Yayınları
- p. 25-42
Geleneksel Olmayan Kesme Yöntemlerinin Uygulama Temelli Karşılaştırılması
Bu çalışmada, modern imalat süreçlerinde önemli bir yere sahip olan geleneksel olmayan kesme yöntemleri kapsamlı bir şekilde ele alınmaktadır. Lazer kesim, tel erezyon (EDM), plazma kesim ve aşındırıcılı su jeti (ASJ) teknolojileri; temel çalışma prensipleri, uygulama alanları, avantajları, dezavantajları ve sınırlamaları açısından sistematik olarak incelenmiştir. Her bir yöntemin teknik özellikleri; iş parçası malzemesi, kalınlık aralığı, geometrik karmaşıklık, yüzey kalitesi gereksinimi, işlem süresi ve maliyet gibi parametrelere göre değerlendirilmiştir. Çalışmanın ikinci bölümünde, söz konusu yöntemlerin farklı endüstriyel uygulamalardaki etkinliği karşılaştırmalı örneklerle analiz edilmiştir. Lazer kesim, yüksek hassasiyet ve ince kesim gerektiren uygulamalarda; tel erezyon, iletken ve karmaşık geometrili parçalarda; plazma kesim, kalın ve büyük çelik yapıların hızlı işlenmesinde; su jeti ise ısıl etkiden kaçınılması gereken kırılgan malzemelerde öne çıkmaktadır. Bu çalışma, üretim sürecine özgü gereksinimlere uygun yöntemin doğru seçilmesinin önemini vurgulamakta; söz konusu teknolojilerin modern ve sürdürülebilir imalat süreçlerindeki stratejik rolünü ortaya koymaktadır.
- 26 June 2025
- Published by Özgür Yayınları
- p. 25-42
Open AccessGeleneksel Olmayan Kesme Yöntemlerinin Uygulama Temelli Karşılaştırılması
Bu çalışmada, modern imalat süreçlerinde önemli bir yere sahip olan geleneksel olmayan kesme yöntemleri kapsamlı bir şekilde ele alınmaktadır. Lazer kesim, tel erezyon (EDM), plazma kesim ve aşındırıcılı su jeti (ASJ) teknolojileri; temel çalışma prensipleri, uygulama alanları, avantajları, dezavantajları ve sınırlamaları açısından sistematik olarak incelenmiştir. Her bir yöntemin teknik özellikleri; iş parçası malzemesi, kalınlık aralığı, geometrik karmaşıklık, yüzey kalitesi gereksinimi, işlem süresi ve maliyet gibi parametrelere göre değerlendirilmiştir. Çalışmanın ikinci bölümünde, söz konusu yöntemlerin farklı endüstriyel uygulamalardaki etkinliği karşılaştırmalı örneklerle analiz edilmiştir. Lazer kesim, yüksek hassasiyet ve ince kesim gerektiren uygulamalarda; tel erezyon, iletken ve karmaşık geometrili parçalarda; plazma kesim, kalın ve büyük çelik yapıların hızlı işlenmesinde; su jeti ise ısıl etkiden kaçınılması gereken kırılgan malzemelerde öne çıkmaktadır. Bu çalışma, üretim sürecine özgü gereksinimlere uygun yöntemin doğru seçilmesinin önemini vurgulamakta; söz konusu teknolojilerin modern ve sürdürülebilir imalat süreçlerindeki stratejik rolünü ortaya koymaktadır.
- Open Access
- 26 June 2025
- Published by Özgür Yayınları
- p. 1-10
Düşük Üretim Hacimli Enjeksiyon Kalıplama İçin 3B Baskı ile Hızlı Kalıp İmalatı
Enjeksiyon kalıplama, polimerik parçalar üretmek için en yaygın üretim yöntemlerinden biridir. Genellikle, seri üretim için çoğu kalıp, uzun takım ömrü sağlayan takım çeliğinden veya daha düşük basınçlar için alüminyum alaşımından yapılır. Ancak, bu malzemelerden üretilen kalıpların önemli dezavantajları; uzun imalat süreçleri ve maliyetleridir. Özellikle istenilen geometri ve yüzey kalitesinin elde edilmesi klasik talaşlı imalat teknolojilerinin beraberinde elektriksel erozyon (EDM) veya elektro-kimyasal (ECM) işleme teknolojilerinin kullanılmasını gerektirir. Bu durum, prototip üretimi veya küçük partiler (küçük üretim hacmi) için takım maliyetlerinin üstesinden gelmeyi gerçekten zorlaştırır. Prototip için eklemeli imalat yöntemlerinin kullanılması önemli bir avantaj sağlasa da, eklemeli imalat yöntemi ile imal edilen parçaların mukavemeti genel olarak enjeksiyon kalıplamadan düşüktür ve ideal bir prototip üretimi için yeterli olmayabilir. Ancak, enjeksiyon kalıplarının eklemeli imalat yöntemi ile üretimi, düşük basınçlı enjeksiyon kalıplama ve düşük üretim hacimleri için önemli avantajlar sunmaktadır. Bu çalışma, iki yöntemi; düşük basınçlı enjeksiyon kalıplama ile 3D baskı/dijital ışık işleme yöntemlerini kalıp imalatı için birleştirmeye yöneliktir. Bu tür hibrit üretim, alüminyum/çelik kalıplardan daha ucuz bir alternatif sunmaktadır. Bu yöntemle imal edilen enjeksiyon kalıpları, yüksek verimlilik ve kısa teslim süreleri ile özellikle karmaşık geometrili parçalar üretme fırsatı sağlar. Bu çalışmada, düz-helisel çift plastik dişli (double gear) seçildi ve dişlinin katı modelleri ve iki parçalı kalıbı bir tasarım yazılımı kullanılarak hazırlandı. Kalıp, UV duyarlı reçine kullanılarak basıldı ve yüksek yoğunluklu polietilen, düşük basınçlı bir enjeksiyon makinesi kullanılarak 3D yazdırılmış kalıba enjekte edildi. Ortaya çıkan parçaların yüzey kalitesine ve boyut doğruluğuna sahip olduğu görüldü. Sonuçlar, eklemeli imalat ve enjeksiyon kalıplamanın birleşiminin düşük miktarda üretim için sağlam bir hibrit yöntem olduğunu göstermektedir. 3D yazdırılmış kalıplar, hızlı takım üretimi sağlayan enjeksiyon sıcaklığını kontrol ederek birçok kez (10-100 adet) kullanılabilmektedir.
- 26 June 2025
- Published by Özgür Yayınları
- p. 1-10
Open AccessDüşük Üretim Hacimli Enjeksiyon Kalıplama İçin 3B Baskı ile Hızlı Kalıp İmalatı
Enjeksiyon kalıplama, polimerik parçalar üretmek için en yaygın üretim yöntemlerinden biridir. Genellikle, seri üretim için çoğu kalıp, uzun takım ömrü sağlayan takım çeliğinden veya daha düşük basınçlar için alüminyum alaşımından yapılır. Ancak, bu malzemelerden üretilen kalıpların önemli dezavantajları; uzun imalat süreçleri ve maliyetleridir. Özellikle istenilen geometri ve yüzey kalitesinin elde edilmesi klasik talaşlı imalat teknolojilerinin beraberinde elektriksel erozyon (EDM) veya elektro-kimyasal (ECM) işleme teknolojilerinin kullanılmasını gerektirir. Bu durum, prototip üretimi veya küçük partiler (küçük üretim hacmi) için takım maliyetlerinin üstesinden gelmeyi gerçekten zorlaştırır. Prototip için eklemeli imalat yöntemlerinin kullanılması önemli bir avantaj sağlasa da, eklemeli imalat yöntemi ile imal edilen parçaların mukavemeti genel olarak enjeksiyon kalıplamadan düşüktür ve ideal bir prototip üretimi için yeterli olmayabilir. Ancak, enjeksiyon kalıplarının eklemeli imalat yöntemi ile üretimi, düşük basınçlı enjeksiyon kalıplama ve düşük üretim hacimleri için önemli avantajlar sunmaktadır. Bu çalışma, iki yöntemi; düşük basınçlı enjeksiyon kalıplama ile 3D baskı/dijital ışık işleme yöntemlerini kalıp imalatı için birleştirmeye yöneliktir. Bu tür hibrit üretim, alüminyum/çelik kalıplardan daha ucuz bir alternatif sunmaktadır. Bu yöntemle imal edilen enjeksiyon kalıpları, yüksek verimlilik ve kısa teslim süreleri ile özellikle karmaşık geometrili parçalar üretme fırsatı sağlar. Bu çalışmada, düz-helisel çift plastik dişli (double gear) seçildi ve dişlinin katı modelleri ve iki parçalı kalıbı bir tasarım yazılımı kullanılarak hazırlandı. Kalıp, UV duyarlı reçine kullanılarak basıldı ve yüksek yoğunluklu polietilen, düşük basınçlı bir enjeksiyon makinesi kullanılarak 3D yazdırılmış kalıba enjekte edildi. Ortaya çıkan parçaların yüzey kalitesine ve boyut doğruluğuna sahip olduğu görüldü. Sonuçlar, eklemeli imalat ve enjeksiyon kalıplamanın birleşiminin düşük miktarda üretim için sağlam bir hibrit yöntem olduğunu göstermektedir. 3D yazdırılmış kalıplar, hızlı takım üretimi sağlayan enjeksiyon sıcaklığını kontrol ederek birçok kez (10-100 adet) kullanılabilmektedir.
- Open Access
- 26 June 2025
- Published by Özgür Yayınları
- p. 75-96
A Comprehensive Investigation on the Effect of Growth Rate and Composition on Dendritic Microstructure and Arm Spacings in Directionally Solidified Al-Zn Alloys
Cellular and dendritic microstructures formed during the solidification of alloy systems lead to a non-uniform distribution of solute elements, i.e., microsegregation, significantly influencing the final properties of the material. The scale and morphology of microsegregation are primarily characterized by primary (λ₁) and secondary (λ₂) dendrite arm spacings. This study investigates the directional solidification behavior of three Al-Zn binary alloys with different compositions: Al-7wt.%Zn, Al-10wt.%Zn, and Al-20wt.%Zn. Alloy samples, prepared under vacuum using high-purity (99.99%) starting materials, were unidirectionally solidified in a custom-built Bridgman-type directional solidification furnace under a constant thermal gradient (G = 10.3 K/mm) and varying growth rates (V) ranging from 8.25 µm/s to 165 µm/s. From the microstructural images obtained from transverse and longitudinal sections of the solidified samples, the primary (λ₁) and secondary (λ₂) dendrite arm spacings were meticulously measured as a function of zinc concentration (Co) and growth rate (V). The experimentally determined λ-V and λ-Co relationships were mathematically modeled using linear regression analysis, and the obtained findings were comprehensively compared with existing theoretical solidification models and similar experimental studies in the literature. This research provides a fundamental understanding of the microstructural evolution in Al-Zn alloys and offers significant data for the design of desired microstructures, and consequently material properties, through the control of solidification parameters.
- 26 June 2025
- Published by Özgür Yayınları
- p. 75-96
Open AccessA Comprehensive Investigation on the Effect of Growth Rate and Composition on Dendritic Microstructure and Arm Spacings in Directionally Solidified Al-Zn Alloys
Cellular and dendritic microstructures formed during the solidification of alloy systems lead to a non-uniform distribution of solute elements, i.e., microsegregation, significantly influencing the final properties of the material. The scale and morphology of microsegregation are primarily characterized by primary (λ₁) and secondary (λ₂) dendrite arm spacings. This study investigates the directional solidification behavior of three Al-Zn binary alloys with different compositions: Al-7wt.%Zn, Al-10wt.%Zn, and Al-20wt.%Zn. Alloy samples, prepared under vacuum using high-purity (99.99%) starting materials, were unidirectionally solidified in a custom-built Bridgman-type directional solidification furnace under a constant thermal gradient (G = 10.3 K/mm) and varying growth rates (V) ranging from 8.25 µm/s to 165 µm/s. From the microstructural images obtained from transverse and longitudinal sections of the solidified samples, the primary (λ₁) and secondary (λ₂) dendrite arm spacings were meticulously measured as a function of zinc concentration (Co) and growth rate (V). The experimentally determined λ-V and λ-Co relationships were mathematically modeled using linear regression analysis, and the obtained findings were comprehensively compared with existing theoretical solidification models and similar experimental studies in the literature. This research provides a fundamental understanding of the microstructural evolution in Al-Zn alloys and offers significant data for the design of desired microstructures, and consequently material properties, through the control of solidification parameters.
- Open Access
- 26 June 2025
- Published by Özgür Yayınları
- p. 63-74
İmalat Süreçlerinde Ortam Gazlarının Enerji Verimliliği Açısından İzlenmesi
İmalat ortamlarında bulunan, zehirli, yanıcı, patlayıcı ya da oksijen seviyesinde olumsuz değişikliklere neden olan tehlikeli gazların tespit edilmesi, izlenmesi ve kontrol edilmesi büyük önem taşımaktadır. İmalat süreçlerinin kaliteli, verimli ve çevreye zarar vermeden devam edebilmesi için her aşamasında takip edilmesi gerekir. Özellikle, gerçekleştirilen kesme, delme, kaynak gibi mekanik operasyonlar, ortamda var olan gazların niteliğine ve miktarına bağlı olarak her an tepkime yaratabilir ve geri döndürülemez kayıplara neden olabilir. İmalat sürecinin ve çevrenin olumsuz etkilenmemesi, iş akışında duraklamalar yaşanmaması için imalat öncesinde ve imalat esnasında bazı prosedürlerin uygulanması gerekir. Bu çalışmada, gaz ölçümü gerçekleştirilmesi gereken ortamlar, iş kazası, zehirlenme ve patlama gibi olumsuzlukların önüne geçilmesi için yapılması gerekenler anlatılmaktadır. Bu sayede sistemlerin düşük maliyetli, çevre açısından sorun teşkil etmeden, verimli ve güvenli çalışması sağlanabilmektedir.
- 26 June 2025
- Published by Özgür Yayınları
- p. 63-74
Open Accessİmalat Süreçlerinde Ortam Gazlarının Enerji Verimliliği Açısından İzlenmesi
İmalat ortamlarında bulunan, zehirli, yanıcı, patlayıcı ya da oksijen seviyesinde olumsuz değişikliklere neden olan tehlikeli gazların tespit edilmesi, izlenmesi ve kontrol edilmesi büyük önem taşımaktadır. İmalat süreçlerinin kaliteli, verimli ve çevreye zarar vermeden devam edebilmesi için her aşamasında takip edilmesi gerekir. Özellikle, gerçekleştirilen kesme, delme, kaynak gibi mekanik operasyonlar, ortamda var olan gazların niteliğine ve miktarına bağlı olarak her an tepkime yaratabilir ve geri döndürülemez kayıplara neden olabilir. İmalat sürecinin ve çevrenin olumsuz etkilenmemesi, iş akışında duraklamalar yaşanmaması için imalat öncesinde ve imalat esnasında bazı prosedürlerin uygulanması gerekir. Bu çalışmada, gaz ölçümü gerçekleştirilmesi gereken ortamlar, iş kazası, zehirlenme ve patlama gibi olumsuzlukların önüne geçilmesi için yapılması gerekenler anlatılmaktadır. Bu sayede sistemlerin düşük maliyetli, çevre açısından sorun teşkil etmeden, verimli ve güvenli çalışması sağlanabilmektedir.
- Open Access
- 26 June 2025
- Published by Özgür Yayınları
- p. 97-114
Effect of Unsteady-State Heat Flow Regime Solidification on the Mechanical Properties of Al-5Cu-5Si-5Mg-5Zn-1Zr
This study comprehensively investigates the impact of unsteady-state heat flow regime solidification on the thermal behavior and mechanical properties of the multicomponent Al-5Cu-5Si-5Mg-5Zn-1Zr (wt.%) alloy. The alloy was solidified in the unsteady-state heat flow regime at a cooling rate range of approximately (0.88–2.77 °C/s) using a custom-built solidification furnace equipped with eight thermocouples. Eutectic spacing (λ) decreased from 20 µm to 6 µm with increasing cooling rates, directly correlating with enhanced mechanical properties. The highest microhardness (HV=177.5 kg/mm²), compressive strength (σc=556.9 MPa), and compressive yield strength (σy=385.5 MPa) were achieved at the fastest cooling rate (2.77°C/s). These findings underscore the critical role of cooling rate optimization in achieving superior mechanical performance for aerospace and automotive applications.
- 26 June 2025
- Published by Özgür Yayınları
- p. 97-114
Open AccessEffect of Unsteady-State Heat Flow Regime Solidification on the Mechanical Properties of Al-5Cu-5Si-5Mg-5Zn-1Zr
This study comprehensively investigates the impact of unsteady-state heat flow regime solidification on the thermal behavior and mechanical properties of the multicomponent Al-5Cu-5Si-5Mg-5Zn-1Zr (wt.%) alloy. The alloy was solidified in the unsteady-state heat flow regime at a cooling rate range of approximately (0.88–2.77 °C/s) using a custom-built solidification furnace equipped with eight thermocouples. Eutectic spacing (λ) decreased from 20 µm to 6 µm with increasing cooling rates, directly correlating with enhanced mechanical properties. The highest microhardness (HV=177.5 kg/mm²), compressive strength (σc=556.9 MPa), and compressive yield strength (σy=385.5 MPa) were achieved at the fastest cooling rate (2.77°C/s). These findings underscore the critical role of cooling rate optimization in achieving superior mechanical performance for aerospace and automotive applications.
- Open Access
- 26 June 2025
- Published by Özgür Yayınları
Makine Mühendisliğinde Yenilikçi İmalat Teknolojileri ve Malzeme Bilimi
Günümüz dünyasında teknoloji büyük bir hızla ilerlemektedir. Makine mühendisliği alanının kapsamı açısından ele alındığında hızla değişen sanayi ihtiyaçlarının karşılanabilmesi, yeni ürünlerin ve malzemelerin imalatının daha verimli ve daha sürdürülebilir olarak gerçekleştirilebilmesi için klasik üretim yöntemlerinin de gelişmesi ve dönüşmesi gerekmektedir. Bu dönüşümün merkezinde ise yenilikçi imalat teknolojileri ve malzeme bilimi yer almaktadır. Bu kitap, geniş bir uygulama sahasına sahip olan makine mühendisliği alanına ait yedi adet çalışmaya yer vermektedir. Bu eserin ortaya çıkmasında değerli çalışmaları ile katkıda bulunan tüm bölüm yazarlarımıza en derin teşekkürlerimizi ve şükranlarımızı sunarız. Bilgi temelli üretim anlayışının ön planda olduğu bu dönemde, hazırladığımız bu kitabın bilim dünyasına ve sanayiye katkı sunmasını temenni ederiz.
- 26 June 2025
- Published by Özgür Yayınları
Open AccessMakine Mühendisliğinde Yenilikçi İmalat Teknolojileri ve Malzeme Bilimi
Günümüz dünyasında teknoloji büyük bir hızla ilerlemektedir. Makine mühendisliği alanının kapsamı açısından ele alındığında hızla değişen sanayi ihtiyaçlarının karşılanabilmesi, yeni ürünlerin ve malzemelerin imalatının daha verimli ve daha sürdürülebilir olarak gerçekleştirilebilmesi için klasik üretim yöntemlerinin de gelişmesi ve dönüşmesi gerekmektedir. Bu dönüşümün merkezinde ise yenilikçi imalat teknolojileri ve malzeme bilimi yer almaktadır. Bu kitap, geniş bir uygulama sahasına sahip olan makine mühendisliği alanına ait yedi adet çalışmaya yer vermektedir. Bu eserin ortaya çıkmasında değerli çalışmaları ile katkıda bulunan tüm bölüm yazarlarımıza en derin teşekkürlerimizi ve şükranlarımızı sunarız. Bilgi temelli üretim anlayışının ön planda olduğu bu dönemde, hazırladığımız bu kitabın bilim dünyasına ve sanayiye katkı sunmasını temenni ederiz.
- Open Access
- 26 June 2025
- Published by Özgür Yayınları
- p. 43-62
Design and Application of Plant Protein-Based Materials for Controlled Phytochemical Delivery in Bone Cancer Therapy-Review
Phytochemicals from plants offer considerable potential for bone cancer treatment because of their anticancer properties. Their clinical effectiveness is frequently restricted by low bioavailability, systemic distribution, and quick elimination. This review focuses on plant protein-based drug delivery systems engineered for the controlled and targeted release of phytochemicals, specifically in bone tissue applications. These systems, prized for their biocompatibility and ability to break down naturally, provide dual functionality as both drug delivery systems and regenerative platforms. Natural biopolymers like silk fibroin, sisal fibers, and bamboo fibers, in addition to widely used plant proteins such as soy, zein, and gliadin, are receiving increasing attention. Silk fibroin aids in the adhesion and growth of bone cells, whereas sisal and bamboo fibers provide mechanical strength and the potential for bone growth, suggesting that they could be effective in bone-regenerative treatments. These materials can be developed into carriers of various micro/nano-scale dimensions, allowing for both sustained release and bone healing. The review also emphasizes key mechanisms such as post-implantation bone-targeted delivery, enhanced osteoconductivity, localized delivery of anticancer drugs, and bioactive surface modifications. In contrast to conventional synthetic polymers, these natural biomaterials display reduced toxicity, environmentally friendly manufacturing processes, and compatibility with the structural framework of bone microenvironments. In conclusion, biomaterials based on plant protein and fiber exhibit significant potential as dual-functional systems for the controlled release of phytochemicals and the regeneration of bone tissue in the context of bone cancer treatment.
- 26 June 2025
- Published by Özgür Yayınları
- p. 43-62
Open AccessDesign and Application of Plant Protein-Based Materials for Controlled Phytochemical Delivery in Bone Cancer Therapy-Review
Phytochemicals from plants offer considerable potential for bone cancer treatment because of their anticancer properties. Their clinical effectiveness is frequently restricted by low bioavailability, systemic distribution, and quick elimination. This review focuses on plant protein-based drug delivery systems engineered for the controlled and targeted release of phytochemicals, specifically in bone tissue applications. These systems, prized for their biocompatibility and ability to break down naturally, provide dual functionality as both drug delivery systems and regenerative platforms. Natural biopolymers like silk fibroin, sisal fibers, and bamboo fibers, in addition to widely used plant proteins such as soy, zein, and gliadin, are receiving increasing attention. Silk fibroin aids in the adhesion and growth of bone cells, whereas sisal and bamboo fibers provide mechanical strength and the potential for bone growth, suggesting that they could be effective in bone-regenerative treatments. These materials can be developed into carriers of various micro/nano-scale dimensions, allowing for both sustained release and bone healing. The review also emphasizes key mechanisms such as post-implantation bone-targeted delivery, enhanced osteoconductivity, localized delivery of anticancer drugs, and bioactive surface modifications. In contrast to conventional synthetic polymers, these natural biomaterials display reduced toxicity, environmentally friendly manufacturing processes, and compatibility with the structural framework of bone microenvironments. In conclusion, biomaterials based on plant protein and fiber exhibit significant potential as dual-functional systems for the controlled release of phytochemicals and the regeneration of bone tissue in the context of bone cancer treatment.
- Open Access
- 26 June 2025
- Published by Özgür Yayınları
- p. 11-24
Fused Deposition Modeling (FDM): Theory, Application, and Innovative Approaches
Fused Deposition Modeling (FDM), one of the most widely used additive manufacturing technologies, has gained significant attention due to its cost-effectiveness, flexibility in material selection, and ease of use. This method involves the layer-by-layer deposition of thermoplastic filaments melted through a nozzle to fabricate three-dimensional objects based on digital models. FDM is extensively utilized in both industrial and academic settings for prototyping and producing functional components across various sectors, including automotive, aerospace, biomedical engineering, and education. The process enables the creation of complex geometries that are difficult to achieve with traditional manufacturing methods, while also minimizing material waste. However, despite its advantages such as rapid prototyping, simplicity, and compatibility with a wide range of materials—including PLA, ABS, PETG, and fiber-reinforced composites—FDM has inherent limitations. These include anisotropic mechanical properties, surface roughness, limited dimensional accuracy, and potential printing errors such as warping, layer shifting, and nozzle clogging. Several process parameters, such as layer height, nozzle temperature, infill percentage, and build platform temperature, significantly influence the final product's quality and mechanical performance. Optimization of these parameters is crucial for improving part strength, dimensional accuracy, and surface finish. Recent advancements aim to enhance FDM’s capabilities through innovations like continuous fiber reinforcement, 4D printing, and the use of recycled materials. This review highlights the theoretical background, working principles, materials, parameters, challenges, and application areas of FDM technology. It also emphasizes the importance of ongoing research in material development, process optimization, and system design to expand FDM’s applicability beyond prototyping into serial production and high-performance industries.
- 26 June 2025
- Published by Özgür Yayınları
- p. 11-24
Open AccessFused Deposition Modeling (FDM): Theory, Application, and Innovative Approaches
Fused Deposition Modeling (FDM), one of the most widely used additive manufacturing technologies, has gained significant attention due to its cost-effectiveness, flexibility in material selection, and ease of use. This method involves the layer-by-layer deposition of thermoplastic filaments melted through a nozzle to fabricate three-dimensional objects based on digital models. FDM is extensively utilized in both industrial and academic settings for prototyping and producing functional components across various sectors, including automotive, aerospace, biomedical engineering, and education. The process enables the creation of complex geometries that are difficult to achieve with traditional manufacturing methods, while also minimizing material waste. However, despite its advantages such as rapid prototyping, simplicity, and compatibility with a wide range of materials—including PLA, ABS, PETG, and fiber-reinforced composites—FDM has inherent limitations. These include anisotropic mechanical properties, surface roughness, limited dimensional accuracy, and potential printing errors such as warping, layer shifting, and nozzle clogging. Several process parameters, such as layer height, nozzle temperature, infill percentage, and build platform temperature, significantly influence the final product's quality and mechanical performance. Optimization of these parameters is crucial for improving part strength, dimensional accuracy, and surface finish. Recent advancements aim to enhance FDM’s capabilities through innovations like continuous fiber reinforcement, 4D printing, and the use of recycled materials. This review highlights the theoretical background, working principles, materials, parameters, challenges, and application areas of FDM technology. It also emphasizes the importance of ongoing research in material development, process optimization, and system design to expand FDM’s applicability beyond prototyping into serial production and high-performance industries.
- Open Access
- 24 December 2024
- Published by Özgür Yayınları
- p. 21-42
Microstructural Evolution and Phase Formation of Al-5Cu-5Si-5Mg-5Zn-1Zr Alloy Freely Solidified in The Unsteady State Heat Flow Regime
In this study, the effect of cooling rate under unsteady-state heat flow conditions on the microstructural evolution and phase formation of a freely solidified Al-5Cu-5Si-5Mg-5Zn-1Zr multi-component aluminum alloy was investigated. Solidification experiments were conducted using a specially designed experimental setup to achieve different cooling rates along the sample. The microstructure and phase composition of the solidified alloy were comprehensively characterized using optical microscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The results indicated that cooling rate significantly impacts the microstructure and intermetallic phase formation. As the cooling rate increased, dendritic structures became finer, and eutectic spacings decreased. Additionally, various intermetallic phases such as Al2Cu, Mg2Si, MgZn2, and Al3Zr were observed within the α-Al matrix phase depending on the cooling rate. At high cooling rates, intermetallic phases were more finely and homogeneously distributed, while at low cooling rates, a coarser and irregular distribution was observed. These findings suggest that solidification under unsteady-state heat flow conditions is an effective method for controlling the microstructure of multi-component aluminum alloys, and consequently, their mechanical properties. The results of this study could provide guidance for the development of new multi-component aluminum alloys and the improvement of the performance of existing alloys.
- 24 December 2024
- Published by Özgür Yayınları
- p. 21-42
Open AccessMicrostructural Evolution and Phase Formation of Al-5Cu-5Si-5Mg-5Zn-1Zr Alloy Freely Solidified in The Unsteady State Heat Flow Regime
In this study, the effect of cooling rate under unsteady-state heat flow conditions on the microstructural evolution and phase formation of a freely solidified Al-5Cu-5Si-5Mg-5Zn-1Zr multi-component aluminum alloy was investigated. Solidification experiments were conducted using a specially designed experimental setup to achieve different cooling rates along the sample. The microstructure and phase composition of the solidified alloy were comprehensively characterized using optical microscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The results indicated that cooling rate significantly impacts the microstructure and intermetallic phase formation. As the cooling rate increased, dendritic structures became finer, and eutectic spacings decreased. Additionally, various intermetallic phases such as Al2Cu, Mg2Si, MgZn2, and Al3Zr were observed within the α-Al matrix phase depending on the cooling rate. At high cooling rates, intermetallic phases were more finely and homogeneously distributed, while at low cooling rates, a coarser and irregular distribution was observed. These findings suggest that solidification under unsteady-state heat flow conditions is an effective method for controlling the microstructure of multi-component aluminum alloys, and consequently, their mechanical properties. The results of this study could provide guidance for the development of new multi-component aluminum alloys and the improvement of the performance of existing alloys.
- Open Access
- 22 June 2023
- Published by Özgür Yayınları
- p. 1-16
Influence of T6 heat Treatment on the Mechanical Properties of AA7075 and AA7020 alloys
The AA7075 and AA7020 alloys were prepared using a vacuum melting furnace and a casting furnace. Mechanical properties of the alloy samples were investigated as-cast and under heat-treated conditions. To investigate the effect of heat treatment, numerous designed AA7075 and AA7020 samples were homogenized (solution process) in two steps (300 oC/12h+475 oC/12h) and then aged under different regimes. The mechanical properties of microhardness (HV), ultimate tensile strength (σUTS), tensile yield strength (σTYS), compressive yield strength (σCYS) and Young's modulus (E) were measured to investigate the effect of heat treatment on mechanical properties. Both alloy systems (AA7075 and AA7020) were compared both within themselves and with each other in terms of mechanical properties depending on how they were subjected to the heat treatment. Depending on the applied heat treatments, 7075 alloy exhibited superior mechanical properties compared to 7020 alloy. A good combination of high microhardness and reasonable tensile strength has been achieved for both alloy systems by sequential and appropriate heat treatment. While the peak sUTS value reached for the AA7075 alloy was 425 MPa (regime 3), it was determined as 320 MPa (regime 2) for the AA7020 alloy. After the aging process at 150 oC/24h (regime 2) applied proceeding the homogenization process, the peak HV and sCYS values for AA7020 alloy were achieved as 1235 MPa and 321.6 MPa, respectively.
- 22 June 2023
- Published by Özgür Yayınları
- p. 1-16
Open AccessInfluence of T6 heat Treatment on the Mechanical Properties of AA7075 and AA7020 alloys
The AA7075 and AA7020 alloys were prepared using a vacuum melting furnace and a casting furnace. Mechanical properties of the alloy samples were investigated as-cast and under heat-treated conditions. To investigate the effect of heat treatment, numerous designed AA7075 and AA7020 samples were homogenized (solution process) in two steps (300 oC/12h+475 oC/12h) and then aged under different regimes. The mechanical properties of microhardness (HV), ultimate tensile strength (σUTS), tensile yield strength (σTYS), compressive yield strength (σCYS) and Young's modulus (E) were measured to investigate the effect of heat treatment on mechanical properties. Both alloy systems (AA7075 and AA7020) were compared both within themselves and with each other in terms of mechanical properties depending on how they were subjected to the heat treatment. Depending on the applied heat treatments, 7075 alloy exhibited superior mechanical properties compared to 7020 alloy. A good combination of high microhardness and reasonable tensile strength has been achieved for both alloy systems by sequential and appropriate heat treatment. While the peak sUTS value reached for the AA7075 alloy was 425 MPa (regime 3), it was determined as 320 MPa (regime 2) for the AA7020 alloy. After the aging process at 150 oC/24h (regime 2) applied proceeding the homogenization process, the peak HV and sCYS values for AA7020 alloy were achieved as 1235 MPa and 321.6 MPa, respectively.