Effect of Local Binary Mixtures of Coarse Aggregates on the Compressive Properties of Concrete
Authors:
Open Access
- 1 March 2020
- journal article
- research article
- Published by University of Benin - Faculty of Environmental Sciences in Nigerian Journal of Environmental Sciences and Technology
- Vol. 4 (1) , 152-159
Abstract
Aggregates, though considered inert, are the primary components that define concrete’s thermal and elastic properties. It has been shown that factors such as maximum aggregate size, grading, shape, strength, water absorption capacity of coarse aggregates affect the properties of concrete. However, improper grading of coarse aggregate could have adverse effect on the amount of cement and water requirement for concrete production. Thus, impacting on the workability, pump-ability and durability of concrete. By maintaining a slump of 50 mm, the effect of varying sizes of coarse aggregates – 10 mm, 14 mm, 20 mm, and combination of these sizes – on the mechanical properties of concrete was obtained. Aggregates, which were used in this work, were sourced from quarries located in Auchi area of Edo State and had impact values between 16% and 28%. It was observed that the higher the coarse aggregate sizes the lower the water – cement (w/c) ratio required to obtain adequate workability. Also, the compressive strength of concrete was observed to be a function of the size of the coarse aggregates used in the concrete mix. It was observed that concrete made with equal proportions of 10 mm and 14 mm coarse aggregate had lower strengths compared to concrete made with 14 mm and 20 mm aggregates. This implies that combination of large sizes of aggregates produced stronger concrete when compared to combinations of smaller sizes of aggregates. It was also observed that density of concrete increased with increasing size of aggregates.Keywords
This publication has 14 references indexed in Scilit:
- Symmetric Performance Analysis for Mechanical Properties of Sustainable Asphalt Materials under Varying Temperature Conditions: An Application of DT and NDT Digital TechniquesSymmetry, 2020
- A Review paper on the Effect of different types of coarse aggregate on ConcreteIOP Conference Series: Materials Science and Engineering, 2018
- Sustainable normal and high strength recycled aggregate concretes using crushed tested cylinders as coarse aggregatesCase Studies in Construction Materials, 2017
- Investigation of aggregate size effects on the compressive behavior of concrete by electromechanical and mechanical impedance spectroscopyProcedia Structural Integrity, 2017
- A Study on Influence of Shape of Aggregate on Strength and Quality of Concrete for Buildings and PavementsAdvanced Materials Research, 2014
- A Study on Effect of Coarse Aggregate Type on Concrete PerformanceArabian Journal for Science and Engineering, 2012
- EFFECTS OF LIGHTWEIGHT AGGREGATES ON AUTOGENOUS DEFORMATION IN CONCRETE2007
- The effect of the mineralogy of coarse aggregate on the mechanical properties of high-strength concreteConstruction and Building Materials, 2006
- Effect of reducing coarse aggregates on concrete strengthConstruction and Building Materials, 2006
- The effect of aggregate shape upon the strength of structural lightweight-aggregate concreteMagazine of Concrete Research, 1973