The role of plasticizers during protein thermoplastic foaming
- 3 April 2019
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (30)
Abstract
Protein thermoplastics, like Novatein, typically comprise a polymer, additives, and plasticizers. During foaming, the plasticizers performed different functions; triethylene glycol (TEG) affected the Tg of the polymer, while water altered the shear viscosity and urea the extensional viscosity. Water and urea also functioned as blowing agents; increasing urea increased the expansion ratio, while an increase in TEG and water decreased it. It was concluded that at this level of plasticization, phase separation occurred and that the plasticizers are most influential during late bubble growth and stabilization. Contrary to previous thought, increasing water had no effect on the Tg, but did lower the shear viscosity, while increasing TEG had the opposite effect. This enables the properties of protein thermoplastics to be tailored during development. During foaming, lower viscosity allows more time for gases to diffuse before the viscosity in the surrounding polymer increases, restricting bubble growth. At higher TEG content, the material is processed further above its Tg, slowing down stabilization and decreasing expansion. This study clarified the role of plasticizers during foaming and showed a decrease in random coils and β‐turns (measured by FT‐IR) with increasing expansion ratio. Knowledge of these mechanisms enables tailoring properties of protein thermoplastics foams during development. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47781.Keywords
Funding Information
- Australian Synchrotron (AS163/IRM/11405)
This publication has 30 references indexed in Scilit:
- Protein network structure and properties of wheat gluten extrudates using a novel solvent-free approach with urea as a combined denaturant and plasticiserSoft Matter, 2011
- Effect of molecular structure on film blowing ability of thermoplastic zeinJournal of Applied Polymer Science, 2009
- Interaction of Urea with Amino Acids: Implications for Urea-Induced Protein DenaturationJournal of the American Chemical Society, 2007
- Foaming of Synthetic and Natural Biodegradable PolymersJournal of Cellular Plastics, 2007
- Shear and elongational rheology of polyethylenes with different molecular characteristics. II. Elongational rheologyJournal of Applied Polymer Science, 2007
- Effect of long‐chain branches of polypropylene on rheological properties and foam‐extrusion performancesJournal of Applied Polymer Science, 2005
- New Evidences of Glass Transitions and Microstructures of Soy Protein Plasticized with GlycerolMacromolecular Bioscience, 2005
- Strain hardening in polypropylenes and its role in extrusion foamingPolymer Engineering & Science, 2004
- Shear viscosity, extensional viscosity, and die swell of polypropylene in capillary flow with pressure dependencyJournal of Applied Polymer Science, 2002
- A study of cell nucleation in the extrusion of polypropylene foamsPolymer Engineering & Science, 1997