A Finite Element Model for Non-Newtonian Starved Thermal-Elastohydrodynamic Lubrication of 3D Line Contact
Authors:
- 1 November 2021
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in International Journal of Applied Mechanics
- Vol. 13 (09)
Abstract
A finite element model for the non-Newtonian starved thermal-elastohydrodynamic lubrication of 3D line contact is developed. The model integrates the mutually dependent solutions of the pressure, film thickness, and temperature in a coupled system. The finite difference Elrod algorithm is introduced in the constructed solution scheme to realize the starvation condition and determine the fractional film content. The lubricant velocity and shear rate of three typical non-Newtonian lubricants are derived by using the separation flow method. The interacted solutions are sequentially determined by their corresponding governing equations. After the model validation, the lubrication performances of the three non-Newtonian lubricants are studied at different levels of inlet lubricant supply. The results show that non-Newtonian rheological behaviors have substantial effects on the lubricant temperature, viscosity, shear rate, velocity, and shear stress, which further affect the accuracy of the predictions of friction and lubrication failure. The solutions of lubrication of machined rough surfaces are also presented to demonstrate the generality of the developed model.Keywords
Funding Information
- Nanyang Technological University
- Innovative Research Group Project of the National Natural Science Foundation of China (51905051)
This publication has 29 references indexed in Scilit:
- On some aspects of numerical solutions of thin-film and mixed elastohydrodynamic lubricationProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2007
- A Mixed Soft Elastohydrodynamic Lubrication Model With Interasperity Cavitation and Surface Shear DeformationJournal of Tribology, 1999
- Thermal Elastohydrodynamic Analysis Using a Generalized Non-Newtonian Formulation With Application to Bair-Winer Constitutive EquationJournal of Tribology, 1994
- A Complete Solution for Thermal-Elastohydrodynamic Lubrication of Line Contacts Using Circular Non-Newtonian Fluid ModelJournal of Tribology, 1992
- Subsurface Stresses in Micro-EHL Line ContactsJournal of Tribology, 1991
- A Generalized Reynolds Equation for Non-Newtonian Thermal Elastohydrodynamic LubricationJournal of Tribology, 1990
- A Cavitation AlgorithmJournal of Lubrication Technology, 1981
- Lubricant Limiting Shear Stress Effect on EHD Film ThicknessJournal of Lubrication Technology, 1980
- A Rheological Model for Elastohydrodynamic Contacts Based on Primary Laboratory DataJournal of Lubrication Technology, 1979
- Shear behaviour of elastohydrodynamic oil filmsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1977