Active flow suction in vaneless diffusers: A stability-enhancement strategy for centrifugal compressors
- 1 November 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (11)
Abstract
This study experimentally and numerically examines the influence of localized, disk-side suction applied within the vaneless diffuser of the National Aeronautics and Space Administration (NASA) Low-Speed Centrifugal Compressor (LSCC) on the inception and spatial evolution of rotating stall. The stall is triggered by a large-scale reverse-flow zone that occupies 60% of the diffuser passage height. This region is driven by an adverse pressure gradient along the disk end wall and disrupts the jet-wake structure, ultimately forming a circumferentially propagating helical stall cell. Motivated by this mechanism, an active bleed strategy is proposed: rectangular suction ports are positioned at 55% of the diffuser inlet radius. The bleed removes the low-momentum fluid beneath the stall vortex, truncates the reverse-flow core, and suppresses its radial–circumferential coupling instability. In addition, the extracted bleed flow increases the radial momentum flux of the remaining mainstream, enhancing its resistance to the adverse gradient, while inducing a beneficial interaction between the passage vortex and the wake that promotes re-energization and re-mixing of the low-energy fluid. As a result, the near-stall operating point is shifted toward 15.86% lower mass flow with only a 0.4% penalty in peak isentropic efficiency. Simultaneously, both the total pressure ratio and isentropic efficiency are improved under reduced flow conditions.Keywords
Funding Information
- National Natural Science Foundation of China (No. 52076079)
- National Natural Science Foundation of China (No. 52406089))
- National Natural Science Foundation of Hebei Province (No. E2022502052)
This publication has 31 references indexed in Scilit:
- Exploration of performance optimization strategies for micro-centrifugal compressors in hydrogen fuel cells: A synergistic analysis combining one-dimensional design and three-dimensional flow fieldsInternational Journal of Hydrogen Energy, 2025
- Evaluation of stability Enhancement and CO reduction in wake reactor at fine combustion States: PIV measurements and POD flame structure analysisChemical Engineering Journal, 2025
- Multi-Objective Optimization Method for Performance Prediction Loss Model of Centrifugal CompressorsJournal of Thermal Science, 2024
- Numerical Simulation Study on Influence of Equation of State on Internal Flow Field and Performance of S-CO2 CompressorJournal of Thermal Science, 2024
- Behavior of Vaneless Diffuser Stall in a Centrifugal CompressorJournal of Thermal Science, 2022
- Effect of axial turbine non-axisymmetric endwall contouring on film cooling at different locationsInternational Journal of Heat and Mass Transfer, 2020
- Application of endwall contouring in a high-subsonic tandem cascade with endwall boundary layer suctionAerospace Science and Technology, 2019
- The impact of casing groove location on the flow instability in a counter-rotating axial flow compressorAerospace Science and Technology, 2018
- Design of a high-performance centrifugal compressor with new surge margin improvement technique for high speed turbomachineryPropulsion and Power Research, 2018
- Stall margin enhancement of a novel casing treatment subjected to circumferential pressure distortionAerospace Science and Technology, 2018