Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Lei Zhang has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Common Design Method and Performance Prediction for Near-Critical Region Compressors

    by Enhui Sun, Kailong Liao, Lei Zhang, Feng Chen, Qiukai Zhang, Yanfeng Liu


  • Performance optimization of a transonic compressor rotor using a primary-auxiliary surrogate model

    by Jinhua Lang, Junyan Li, Guangyao An, Lei Zhang

    In axial compressor blade design optimization research, the surrogate model serves as a critical tool for performance prediction, but its construction often incurs high computational costs. To reduce surrogate model construction costs while ensuring prediction accuracy, this study proposes a primary-auxiliary composite neural network surrogate model based on flow field extraction. During model construction, extensive internal flow field data are extracted and employed to support model training, which enables efficient global optimization. To validate the proposed surrogate model, this study selects the Darmstadt transonic compressor (DTC) as the test case, sets the rotor blade sweep as the optimization variable, and targets increases in both the compressor stable operating range and the efficiency at the peak-efficiency point as the optimization objectives. The study employed the primary-auxiliary composite surrogate model with the non-dominated sorting genetic algorithm II (NSGA-II) to explore the Pareto frontier and execute aerodynamic performance optimization design. Results demonstrate that, under few-shot conditions, the prediction accuracy achieved using the primary-auxiliary composite surrogate model is 61.2% higher compared to directly constructed surrogate models. Optimization of the rotor blade sweep led to a reduction in tip leakage flow intensity, a downstream shift, and weakening of boundary layer separation at the lower blade span. While the design point efficiency experienced a minor increase, the stable operating range of the compressor expanded by 17.7%. This study verifies the applicability of the primary-auxiliary composite surrogate model to compressor blade profile optimization and provides a novel means to boost prediction accuracy under low-cost surrogate model constraints.

  • Active flow suction in vaneless diffusers: A stability-enhancement strategy for centrifugal compressors

    by Wei Yuan, Xiangwu Lu, Qian Zhang, Lei Zhang

    This study experimentally and numerically examines the influence of localized, disk-side suction applied within the vaneless diffuser of the National Aeronautics and Space Administration (NASA) Low-Speed Centrifugal Compressor (LSCC) on the inception and spatial evolution of rotating stall. The stall is triggered by a large-scale reverse-flow zone that occupies 60% of the diffuser passage height. This region is driven by an adverse pressure gradient along the disk end wall and disrupts the jet-wake structure, ultimately forming a circumferentially propagating helical stall cell. Motivated by this mechanism, an active bleed strategy is proposed: rectangular suction ports are positioned at 55% of the diffuser inlet radius. The bleed removes the low-momentum fluid beneath the stall vortex, truncates the reverse-flow core, and suppresses its radial–circumferential coupling instability. In addition, the extracted bleed flow increases the radial momentum flux of the remaining mainstream, enhancing its resistance to the adverse gradient, while inducing a beneficial interaction between the passage vortex and the wake that promotes re-energization and re-mixing of the low-energy fluid. As a result, the near-stall operating point is shifted toward 15.86% lower mass flow with only a 0.4% penalty in peak isentropic efficiency. Simultaneously, both the total pressure ratio and isentropic efficiency are improved under reduced flow conditions.


  • Gramian angular field imaging and texture analysis for identifying instability precursors in compressor unsteady flows

    by Bingjie Li, Chen Huang, Teng Zhou, Wenqiang Zhang, Lei Zhang, Ben Zhao

    We present an image-based approach for early detection of surge precursors in a centrifugal compressor. One-dimensional pressure signals are mapped to Gramian angular field images, from which Gray Level Co-occurrence Matrix correlation is computed as the primary indicator using fixed windowing and gray-level quantization. On a single test rig at 60 000 and 70 000 rpm, the correlation trace rises prior to measured surge onset and follows the approach–surge–recovery evolution (e.g., a surge interval near 19.41–19.51 s at 60 000 rpm), enabling a baseline-referenced threshold for monitoring. To stabilize short-window fluctuations, a lightweight exponentially weighted moving average (α = 0.1) produces smoother yet responsive trajectories without resorting to black-box training. In the stable operating map, correlation exhibits a V-shaped variation with decreasing mass flow—coherent at overload, weakest near peak efficiency, and strengthening again as surge is approached—providing a physically interpretable trend. Within this scope, the study is a compressor-focused proof-of-concept; extension to other unsteady-flow problems is plausible but will require problem-specific tuning and independent validation.


  • The construction of one-dimensional chain-like coordination polymers and their applications in anode materials for lithium-ion batteries

    by Jingwei Liu, Shifa Dang, Xiaolong Cheng, Mengxian Zheng, Xinyi Chen, Weile Kong, Lei Zhang, Shuangyan Wu

    Homogeneous 1D coordination polymers Co-1D ([Co(pzca)2H2O]n) and Ni-1D ([Ni(pzca)2H2O]n), constructed with pyrazine-2-carboxylic acid, enhance reversible Li-ion storage/release during cycling.


  • Performance optimization mechanisms in a supercritical carbon dioxide centrifugal compressor with micro-blades

    by Lei Zhang, Menghan Wei, Jinhua Lang, Guangyao An, Wei Yuan, Qian Zhang

    The supercritical carbon dioxide (sCO2) centrifugal compressor, as a core component of the Brayton power cycle, faces a critical technical challenge in expanding its stable operating range to ensure stable operation of the cycle system. This investigation was conducted on a sCO2 centrifugal compressor to quantify the effects of the micro-blade on the performance and stability of the centrifugal compressor. The results demonstrate that adding the micro-blade profiles on the shroud side of the vaneless diffuser extends the compressor's stable operating range by 7.76%. The stability enhancement mechanism of the micro-blade primarily manifests in three aspects: first, after adding the micro-blade, the reverse flow region on the shroud side of the original diffuser is effectively truncated, reducing the reverse flow region on the shroud side. Second, on the pressure surface of the micro-blade, the airflow experiences counterclockwise circumferential deflection due to physical blockage from the micro-blade and moves toward the outlet of the diffuser under the action of the inlet vortex, which reduces the flow blockage. Third, low-energy fluid near the micro-blade forms a channel vortex and wake vortex that promote mixing between the main flow and low-energy fluid in the reverse flow region, enhancing the momentum of the low-energy fluid and strengthening its ability to resist adverse pressure gradients. The synergy of these effects reduces the accumulation of low-energy fluid on the shroud side of diffuser, improves the flow conditions in the diffuser passage, and consequently delays stall inception.


  • Performance optimization of a transonic compressor using synthetic jets based on vortex breakdown suppression

    by Guangyao An, Yihui Zou, Jinhua Lang, Hongyang Li, Lei Zhang

    Tip leakage vortex breakdown, as a strong unsteady phenomenon, is recognized as an important inducing factor for compressor rotating stall. In this study, a validated numerical simulation was conducted to analyze the impact and control mechanism of synthetic jets on the performance of a transonic compressor from the perspective of tip leakage vortex breakdown suppression. The results indicate that the baseline compressor's stall mechanism is as follows: under near stall condition, an unsteady flow process dominated by the tip leakage vortex breakdown exists in the blade tip. During this process, the flow capacity diminishes, leading to an emergence of leading-edge spillage, which subsequently triggers rotating stall. Synthetic jets yield considerable improvement in the compressor performance. In cases synthetic jets positioned at 25%, Cax achieves a maximum improvement of 10.97% in the stability margin, while synthetic jets placed at 50% Cax gives an improvement of peak efficiency by 0.82%. The mechanism for performance improvement is as follows: synthetic jets suppress the vortex breakdown, disrupt the inherent feedback mechanism in the tip flow field, and reduce the blockage within the passage, thereby achieving an extension of the stability margin. Specifically, during the injection phase, an induced vortex suppresses the breakdown of the tip leakage vortex, thereby reducing the blade loading. In the suction phase, the tip leakage flow is reduced, which weakens the recirculation zone and causes the interface between the mainstream and the leakage flow to shift downstream. This research provides technical support for the development and optimization of efficient, wide-margin compressors.


  • Open Access

    Influence Mechanism of Ambient Air Parameters on the Rotational Stall of an Axial Fan

    by Hui Ma, Guangtong Tang, Chaoyang Wang, Tianlong Wang, Xin Li, Yonghui Jia, Yulong Qiu, Wei Yuan, Lei Zhang

    This study investigates a dual-stage axial-flow fan within a specific power plant context. Numerical simulations encompassing both steady-state and stall conditions were conducted utilizing the Reynolds-averaged Navier–Stokes (RANS) equations coupled with the Realizable k–ε turbulence model. The findings reveal that, under normal operating conditions, there exists a positive correlation between the mass flow rate and outlet pressure with gas density while displaying a negative correlation with dynamic viscosity. Regardless of the changes in air density, the volumetric flow rate at the maximum outlet pressure of the fan remains essentially the same. When a stall occurs, the volumetric flow rate rapidly decreases to a specific value and then decreases slowly. The analysis of the three-dimensional flow field within the first-stage rotor was performed before and after the rotational stall occurrence. Notably, stall inception predominantly manifests at the blade tip. As the flow rate diminishes, the leakage area at the blade tip within a passage expands, directing the trajectory of the leakage vortex toward the leading edge of the blade. Upon reaching a critical flow rate, the backflow induced by the blade tip leakage vortex obstructs the entire passage at the blade tip, progressively evolving into a stall cell, thereby affecting flow within both passages concurrently.

  • Investigation of a rotating stall in a supercritical CO2 centrifugal compressor

    by Lei Zhang, Fan Yang, Guangyao An, Jinhua Lang, Wei Yuan, Qian Zhang

    Due to the nonlinear behavior of carbon dioxide properties at its critical point and the size effect of the supercritical carbon dioxide (S-CO2) centrifugal compressor, the stall causation mechanism differs between the S-CO2 centrifugal compressor and a conventional air compressor. The comprehension of the induced principle of the S-CO2 compressor rotating stall holds immense significance in enhancing stall margin and efficiency. This paper employs unsteady simulations to investigate the causes of the impeller rotating stall in the S-CO2 centrifugal compressor. The results show that the leading edge breakdown vortex (LEBV) formed by the tip leakage vortex (TLV) breakdown and the reverse flow in the passage are the reasons for blocking the passage and ultimately causing the rotating stall of the impeller. The migration motion of the LEBV not only induces the leading edge spillage phenomenon but also influences the intensity of the tip leakage flow (TLF) in adjacent passages, causing the propagation of the TLV breakdown phenomenon in the opposite direction to that of impeller rotation. The TLV undergoes intermittent breakdown in flow field, which is influenced by variations in TLF intensity. Additionally, there is a preceding process of breakdown-induced vortex formation and disappearance prior to TLV fragmentation.