High-Voltage Lithium Batteries Enabled by Facile In Situ Fabrication of Monophasic Cellulose-Based Single-Ion Conductors
- 18 June 2025
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (26) , 38131-38142
Abstract
The growing demand for high-energy-density, safe, and sustainable lithium-ion batteries (LIBs) necessitates the development of innovative electrolytes. Herein, we present a facile in situ preparation strategy for fabricating a high-performance single-ion conductor (SC). This SC is based on hydroxypropyl cellulose (HPC) integrated with polyethylene glycol diacrylate cross-linker, in combination with sodium styrene sulfonate (NaSS) as a functional monomer. The introduction of NaSS is crucial, as it introduces sulfonate groups that are immobilized within the polymer network, enabling selective lithium-ion transport. This approach offers a significant advancement over conventional polyether-based gel polymer electrolytes (GPEs), which usually suffer from limited oxidative stability and require the use of separators, particularly in high-voltage battery applications. The in situ polymerization method presented here eliminates the need for a separator and offers several key advantages: rapid processability, excellent scalability, and the formation of a stable solid electrolyte interface. The result is a robust, separator-free GPE. Our HPC-based single-ion conductor (MHPC SC) exhibits a high lithium transference number of 0.89 and an ionic conductivity of 2.4 mS cm-1 at room temperature. These properties are attributed to efficient lithium-ion transport through its synergistic effect of the polyanionic conductor and HPC matrix. The mechanically robust and highly conformal polymer network effectively suppresses detrimental interfacial reactions and mitigates dendrite growth, resulting in an enhanced cycling stability. Notably, the MHPC SC enables stable operation with high-voltage cathodes up to 4.3 V, achieving 94% capacity retention over 100 cycles. These findings highlight the potential of cellulose-based GPEs as a sustainable and high-performance electrolyte that significantly enhances both the safety and performance of advanced LIBs.Keywords
Funding Information
- National Research Foundation of Korea (RS-2023-00272734, RS-2024-00397042)
- Korea Institute of Science and Technology (2E33851)
- Korea Forest Service (RS-2024-00403384)
This publication has 57 references indexed in Scilit:
- In Situ Polymerized Flame‐Retardant Crosslinked Quasi Solid‐State Electrolytes for High‐Voltage Lithium Metal BatteriesAdvanced Energy Materials, 2024
- Separator‐Free In Situ Dual‐Curing Solid Polymer Electrolytes with Enhanced Interfacial Contact for Achieving Ultrastable Lithium‐Metal BatteriesAdvanced Energy Materials, 2023
- Lithium Batteries and the Solid Electrolyte Interphase (SEI)—Progress and OutlookAdvanced Energy Materials, 2023
- Surface Lattice Plasmon Resonances by Direct In Situ Substrate Growth of Gold Nanoparticles in Ordered ArraysAdvanced Materials, 2022
- Are Polymer‐Based Electrolytes Ready for High‐Voltage Lithium Battery Applications? An Overview of Degradation Mechanisms and Battery PerformanceAdvanced Energy Materials, 2022
- 3D Printing of Liquid Crystalline Hydroxypropyl Cellulose—toward Tunable and Sustainable Volumetric Photonic StructuresAdvanced Functional Materials, 2022
- Boosting the Oxidative Potential of Polyethylene Glycol‐Based Polymer Electrolyte to 4.36 V by Spatially Restricting Hydroxyl Groups for High‐Voltage Flexible Lithium‐Ion Battery ApplicationsAdvanced Science, 2021
- Single‐Ion Conducting Polymer Electrolytes for Solid‐State Lithium–Metal Batteries: Design, Performance, and ChallengesAdvanced Energy Materials, 2021
- Advances in Composite Polymer Electrolytes for Lithium Batteries and BeyondAdvanced Energy Materials, 2020
- Liquid Polydimethylsiloxane Grafting to Enable Dendrite‐Free Li Plating for Highly Reversible Li‐Metal BatteriesAdvanced Functional Materials, 2019