The effects of recycling process on thermal, chemical, rheological, and mechanical properties of PC/ABS binary and PA6/PC/ABS ternary blends
- 17 March 2015
- journal article
- research article
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 48 (2) , 164-181
Abstract
In this study, polycarbonate/acrylonitrile–butadiene–styrene (PC/ABS) and polyamide 6/PC/ABS (PA6/PC/ABS) blends were reprocessed (recycled) five times and the influences of multiple molding processes on the thermal, chemical, morphological, rheological, and mechanical properties of the recycled and virgin specimens were investigated. The impact strength, tensile properties (elastic modulus, strength, and strain at break), and flexural properties (modulus and strength) were measured to determine the mechanical properties of the blends. The rheology of the samples was evaluated via measuring the melt flow index (MFI). It was concluded that the chemical structures, melting temperatures, and thermal properties of both blends did not significantly change with recycling. From the mechanical tests, in general, it was found that increasing the number of recycling processes did not considerably alter the flexural properties and tensile strength of PC/ABS blends, but decreased their MFI and impact strength. On the other hand, the elastic modulus and tensile strength of PA6/PC/ABS decreased with the number of recycling processes, whereas MFI, flexural properties, and impact strength of the ternary blends improved.Keywords
This publication has 36 references indexed in Scilit:
- Effect of EVA-g-MAH on Mechanical Properties of PC/ABS BlendsPolymer-Plastics Technology and Engineering, 2012
- Analysis of thermomechanical reprocessing effects on polypropylene/ethylene octene copolymer blendsPolymer Degradation and Stability, 2012
- Influence of Recycled ABS Added to Virgin Polymers on the Physical, Mechanical Properties and Molding CharacteristicsPolymer-Plastics Technology and Engineering, 2011
- Effect of reprocessing and accelerated ageing on thermal and mechanical polycarbonate propertiesJournal of Materials Processing Technology, 2010
- Influence of rubber content in ABS in wide range on the mechanical properties and morphology of PC/ABS blends with different compositionPolymer Engineering & Science, 2006
- Characterisation of filled and recycled PA6Macromolecular Symposia, 2003
- Characterization of monopolymer blend of virgin and recycled polyamide 6Polymer Engineering & Science, 2002
- Recycling of dry and wet polyamide 6Journal of Applied Polymer Science, 2002
- Physical-mechanical properties and morphological study on nylon-6 recycling by injection moldingJournal of Applied Polymer Science, 2000
- The recycling of thermoplastics: Prediction of the properties of mixtures of virgin and reprocessed polyolefinsPolymer Engineering & Science, 1996