Assessment of the stepped isothermal method for accelerated creep testing of high-density polyethylene
Open Access
- 27 August 2021
- journal article
- research article
- Published by Springer Nature in Mechanics of Time-Dependent Materials
- Vol. 26 (4) , 775-790
Abstract
Thermoplastic materials are increasingly used in demanding structural applications under, in some cases, long-term static loading over several decades. In this regard, the stepped isothermal method (SIM) with creep testing at stepwise increased temperature levels in combination with time-temperature superposition (TTSP) provides a very time efficient procedure for long-term creep characterization. In the present study, the creep behavior of an injection molded high-density polyethylene material (HDPE) was investigated by SIM in the thermally untreated state as well as after annealing.Due to experimental issues regarding the heating behavior of the specimens and non-linear viscoelastic behavior, particularly at elevated temperatures, bi-directional curve shifting was required in order to generate meaningful master curves for creep compliance. In a first step, an Arrhenius equation was used for the horizontal curve shifting, based on activation energies, determined in additional multi-frequency dynamic mechanical analysis (DMA). Continuous master curves were then obtained by empirical vertical shifting of the individual creep curve segments for the different temperature levels. In general, good agreement was observed between the resulting SIM master curves and the corresponding conventionally measured creep compliance curves at least for a time range up to 300 hours. Furthermore, significant differences in the creep tendency of the annealed material state compared to the thermally untreated condition revealed the distinct influence of the thermal history on the resulting creep behavior.Keywords
Funding Information
- Montanuniversität Leoben
This publication has 6 references indexed in Scilit:
- Correlation of Polymerization Conditions with Thermal and Mechanical Properties of Polyethylenes Made with Ziegler-Natta CatalystsInternational Journal of Polymer Science, 2014
- Accelerated creep testing of polymers using the stepped isothermal methodPolymer Testing, 2013
- Evaluation of creep behavior of high density polyethylene and polyethylene-terephthalate geogridsGeotextiles and Geomembranes, 2010
- Creep of Geotextiles Using Time–Temperature Superposition MethodsJournal of Geotechnical and Geoenvironmental Engineering, 2004
- The Glass Temperature of Linear PolyethyleneMacromolecules, 1970
- Application of time‐temperature superposition principle to long term engineering properties of plastic materialsPolymer Engineering & Science, 1968