Determination of the effect of artificial aging parameters on dry sliding wear resistance of 6013 aluminum alloy (Al-Mg-Si-Cu)
Author:
Open Access
- 15 August 2021
- journal article
- research article
- Published by International Advanced Researches and Engineering Journal in International Advanced Researches and Engineering Journal
- Vol. 5 (2) , 181-187
Abstract
In this study, the effect of artificial aging parameters, applied to AA6013 aluminum alloys commonly used in the automotive and aerospace sectors, on wear resistance was examined. For this purpose, AA6013 aluminum alloy samples were solutionized at 575 °C for 60 minutes and then they were artificially aged for 2, 4, and 6 hours at 180 and 200 °C temperatures. Mean hardness was measured as 66.6 HV in the solutionized samples taken. It was determined that as a result of artificial aging, α-AlFeMnSi intermetallic phase precipitation were formed between α-Al grains. By the effect of precipitation hardening, an increase in hardness was observed in all artificially aged samples; the highest hardness was found as an average of 149.3 HV in AA6013 samples aged artificially for 2 hours at 200 °C. A general decrease in the friction coefficients of samples aged at both 180 °C and 200 °C was observed along with the artificial aging temperature. The lowest specific wear rate was determined as 3.542x10-3 mm3/Nm in the AA6013 sample aged artificially for 2 hours at 200 °C.Keywords
This publication has 22 references indexed in Scilit:
- The effect of different sliding speeds on wear behavior of ZrO2 reinforcement aluminium matrix composite materialsInternational Advanced Researches and Engineering Journal, 2020
- Comparing the weldability of AA6013-T4 aluminium alloy on DP600 dual-phase steel with laser welding and resistance spot weldingJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2020
- Mechanisms controlling the artificial aging of Al–Mg–Si AlloysActa Materialia, 2011
- Secondary precipitation in an Al–Mg–Si–Cu alloyActa Materialia, 2007
- Study of artificial aging in AlMgSi (6061) and AlMgSiCu (6013) alloys by Positron AnnihilationJournal of Materials Science, 2006
- Identification of Precipitates in 6013 Aluminum Alloy (Al–Mg–Si–Cu)Zeitschrift für Metallkunde, 2002
- A calorimetric study of precipitation in commercial aluminium alloy 6061Journal of Materials Science Letters, 1991
- Aluminum alloy 6013 sheet for new U.S. Navy aircraftJOM, 1990
- The diffraction of X-rays by age-hardening aluminium copper alloys.Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1938
- Structure of Age-Hardened Aluminium-Copper AlloysNature, 1938