Influence Degree and Scheme of Hot Reduction on Properties of the Carbon Steel
Open Access
- 30 April 2025
- journal article
- Published by Manufacturing Technologies and Applications in İmalat Teknolojileri ve Uygulamaları
- Vol. 6 (1) , 150-156
Abstract
This study examines the impact of hot plastic deformation at 1250°C on austenite grain refinement and mechanical properties in carbon steel for railway wheels. The deformation strategies—single-step versus two-step compression with equivalent total strain—were compared to assess their effects on austenitic microstructure and material performance. Austenite grain size was quantified via light microscopy and quantitative structural analysis, while mechanical properties were evaluated using a universal tensile testing machine, following the ASTM E8 standard, at room temperature. (strain rate: 10⁻³ s⁻¹) Results reveal that austenite grain refinement occurs proportionally with increasing deformation, irrespective of the compression scheme. However, the deformation strategy significantly influences strength and ductility at lower strain levels. Specifically, two-stage compression at smaller strains (e.g., below 60% total deformation) enhances ultimate tensile strength by up to 10% and ductility by 30–40% compared to single-step compression. This improvement is attributed to partial retention of austenite substructure during interrupted deformation, which alters dynamic recrystallization kinetics and promotes dislocation redistribution. The differential effect diminishes progressively with higher strain levels, and beyond 60% deformation, both schemes yield equivalent grain sizes and mechanical properties due to complete recrystallization and microstructural homogenization. These findings underscore the critical role of deformation sequencing in optimizing mechanical performance during thermomechanical processing, particularly for applications requiring tailored strength-ductility balances in high-temperature-formed carbon steels.Keywords
This publication has 10 references indexed in Scilit:
- INFLUENCE HOT PLASTIC DEFORMATION ON THE STRUCTURE AND PROPERTIES OF CARBON STEEL OF THE RAILWAY WHEELScientific Journal of Silesian University of Technology. Series Transport, 2023
- Assessment of Combinability of S235JR-S460MC Structural Steels on Fatigue PerformanceTransactions of the Indian Institute of Metals, 2023
- INFLUENCE STRUCTURE ON THE PLASTICITY OF CARBON STEEL OF THE RAILWAY WHEEL RIM IN OPERATIONScientific Journal of Silesian University of Technology. Series Transport, 2022
- Effect of Mechanical Properties of Rail and Wheel on Wear and Rolling Contact FatigueMetals, 2022
- Austenite grain growth and hot deformation behavior in a medium carbon low alloy steelJournal of Materials Research and Technology, 2020
- Novel Etching Technique for Delineation of Prior-Austenite Grain Boundaries in Low, Medium and High Carbon SteelsMaterials, 2020
- The Effects of Hot Deformation Parameters on the Size of Dynamically Recrystallised Austenite Grains of HSLA SteelAdvances in Science and Technology Research Journal, 2020
- Study on the Nucleation and Growth of Pearlite Colony and Impact Toughness of Eutectoid SteelMetals, 2019
- The effect of transformation temperature and prior austenite grain size on the pearlite colony size in vanadium treated pearlitic steelsScripta Metallurgica, 1987
- Dislocation Cell Formation in MetalsJournal of Applied Physics, 1970