Improvement in mechanical properties of commercially pure titanium through reverse rolling
- 29 May 2017
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine Letters
- Vol. 97 (7) , 273-279
Abstract
Commercially pure (cp) titanium plates were subjected to 90% reduction in thickness through UDR (unidirectional rolling) and RR (reverse rolling) in the cold-rolling route. These rolled plates were then annealed at 600 °C for 20 min. The plates processed through UDR and RR exhibited similar values of ductility, but the plates subjected to RR exhibiting a significant increase in their strength compared to those rolled through UDR. However, on annealing the yield strength of the RR plate was reduced slightly while its ductility improved. Relative growths of dislocation density in the samples appeared to be responsible for such differences in the mechanical properties of the samples.Keywords
This publication has 17 references indexed in Scilit:
- Contribution of Twins to the Strengthening of Commercial Purity Titanium after Equal-Channel Angular PressingMaterials Science Forum, 2010
- Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beamsActa Materialia, 2009
- Evolution of nanoscale porosity during equal-channel angular pressing of titaniumActa Materialia, 2009
- Dynamic dislocation–defect analysisPhilosophical Magazine, 2006
- Principles of equal-channel angular pressing as a processing tool for grain refinementProgress in Materials Science, 2006
- Effects of equal channel angular pressing temperature on deformation structures of pure TiMaterials Science and Engineering: A, 2003
- Microstructure development during equal-channel angular pressing of titaniumActa Materialia, 2003
- Physics and phenomenology of strain hardening: the FCC caseProgress in Materials Science, 2003
- Neutron diffraction method for stored energy measurement in interstitial free steelActa Materialia, 1997
- An overview on the use of titanium in the aerospace industryMaterials Science and Engineering: A, 1996