Preparation and Electrochemical Characterization of Concrete Containing Microencapsulated Calcium Nitrate Corrosion Inhibitor
Open Access
- 9 April 2019
- journal article
- research article
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 271, 07009
Abstract
We present the preparation and inhibition behavior of rebar in the presence of calcium nitrate (CN)-containing microcapsules with concentrations of 0.50, 2.00, and 5.00 wt.% in concrete. From both open circuit potential (OCP) and electrochemical impedance spectroscopy spectra, it was found that an addition of microcapsules containing CN corrosion inhibitor into concrete beams successfully repassivated or maintained the passivity of the rebar when the concrete was cracked. This corrosion inhibitor repassivated the rebar by forming a passive layer on the rebar surface under the crack. This repassivation process was evident by an increase of OCP values to more positive values or by stable OCP values at around -100 mV vs SCE. An increase in phase angle after corrosion activation for the sample with 2.00 wt.% microcapsule clearly showed this repassivation process. The optimum concentration for maintaining the passivity on rebar in the cracked concrete was found to be 5.00 wt.%.Keywords
This publication has 3 references indexed in Scilit:
- Evaluation of Microencapsulated Corrosion Inhibitors in Reinforced Concrete2018
- Evaluation of Self-Healing Concrete with Microencapsulated Calcium NitrateJournal of Materials in Civil Engineering, 2017
- Anodic corrosion inhibitors against chloride induced corrosion of concrete rebarsAdvances in Applied Ceramics: Structural, Functional and Bioceramics, 2011