The Impact of Diesel Injection Strategy and In-Cylinder Temperature on the Combustion and Emissions of Ammonia/Diesel Dual-Fuel Marine Engine
Open Access
Abstract
This study investigates the impact of different combustion control strategies on marine engine combustion and emission characteristics at a high ammonia energy ratio. Compared to the strategy of maintaining a constant fuel injection duration, the strategy of keeping the fuel injection pressure constant allows the kinetic energy of diesel to remain at a higher level. This results in an increase in combustion efficiency and indicated the thermal efficiency of the engine, while also reducing CO2 and soot emissions. However, when the ammonia energy ratio increases to more than 50%, the indicated thermal efficiency starts to decrease along with the increase in the emissions of N2O and unburned ammonia. To address these issues, one of the potential means is to improve the in-cylinder combustion environment by increasing the in-cylinder gas temperature. This can enhance combustion efficiency and ultimately optimize the performance and emission characteristics of dual-fuel engines, which results in an increase in the combustion efficiency to 98% and indicated thermal efficiency to 54.47% at a relatively high ammonia energy ratio of 60%. Emission results indicate that N2O emissions decrease from 1099 ppm to 25 ppm, while unburned ammonia emissions drop from 16016 ppm to 100 ppm. Eventually, the greenhouse gas emissions were reduced by about 85.3% in comparison with the baseline case.Keywords
Funding Information
- Young Innovative Talent Program (2022A-135-G, 2022Z151&2024Z134, 22302044)
- Ningbo Major Research and Development Plan Project (2022A-135-G, 2022Z151&2024Z134, 22302044)
- National Natural Science Foundation of China (2022A-135-G, 2022Z151&2024Z134, 22302044)
- Guangxi Bagui Young Scholars Project (2022A-135-G, 2022Z151&2024Z134, 22302044)
This publication has 40 references indexed in Scilit:
- Towards sustainable maritime transport: Focus on the early phase of technology development related to alternative fuelsEnergy for Sustainable Development, 2025
- Effect of ammonia energy ratio and load on combustion and emissions of an ammonia/diesel dual-fuel engineEnergy, 2024
- Utilization of renewable and sustainable diesel/methanol/n-butanol (DMB) blends for reducing the engine emissions in a diesel engine with different pre-injection strategiesEnergy, 2023
- Application of fuel cells with zero-carbon fuels in short-sea shippingApplied Energy, 2022
- Comparative performance and emissions assessments of a single-cylinder diesel engine using artificial neural network and thermodynamic simulationApplied Thermal Engineering, 2021
- A perspective on the use of ammonia as a clean fuel: Challenges and solutionsInternational Journal of Energy Research, 2020
- Greenhouse Gas Emissions2019
- Ammonia oxidation at high pressure and intermediate temperaturesFuel, 2016
- Experimental and modeling study on the high-temperature oxidation of Ammonia and related NOx chemistryCombustion and Flame, 2015
- A New Droplet Collision AlgorithmJournal of Computational Physics, 2000