A 3-to-40-V Automotive-Use GaN Driver With Active Bootstrap Balancing and V SW Dual-Edge Dead-Time Modulation Techniques
- 10 July 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 56 (2) , 521-530
Abstract
This article presents a GaN driver operating at a switching frequency variable from 10 to 30 MHz to achieve reliable and efficient power conversion for automotive electronics applications. An active bootstrap (BST) balancing (ABB) technique is presented to stabilize the BST rail voltage by sensing VSW and controlling BST rail charging. Meanwhile, a VSW dual-edge dead-time (tdead) modulation senses instant VIN and IO and generates optimal tdead for VSW trailing and leading edges, achieving zero-voltage switching (ZVS) turn-on for GaN power switches. To operate at high frequency and retain high efficiency, pulse-based dynamic up- and down-level shifters are developed to achieve sub-nanosecond propagation delay with a quiescent current of 0.5 μA. To validate this work, a switching power converter prototype is implemented using a 0.35-μm high-voltage (HV) BCD process. It maintains a constant 5.1-V BST rail voltage to prevent GaN FET from destructive breakdown and accomplishes 0.9-to-3.7-ns tdead and 3.7-to-10.4-ns tdead for VSW trailing and leading edge, respectively, in response to load current IO change from 0.01 to 1.2 A. The proposed techniques jointly improve the efficiency by 8.3%, which peaks at 90.7% for 12-to-5-V conversion and 88% for 40-to-5-V conversion.Keywords
This publication has 9 references indexed in Scilit:
- A Tri-Slope Gate Driving GaN DC–DC Converter With Spurious Noise Compression and Ringing Suppression for Automotive ApplicationsIEEE Journal of Solid-State Circuits, 2017
- 25.3 A 1.3A gate driver for GaN with fully integrated gate charge buffer capacitor delivering 11nC enabled by high-voltage energy storing2017
- An 18 V Input 10 MHz Buck Converter With 125 ps Mixed-Signal Dead Time ControlIEEE Journal of Solid-State Circuits, 2016
- High frequency DC-DC converter using GaN device2012
- Automatic dead time optimization in a high frequency DC-DC buck converter in 65 nm CMOS2011
- Robust and efficient synchronous buck converter with near-optimal dead-time control2011
- Nanosecond Delay Floating High Voltage Level Shifters in a 0.35 $\mu$m HV-CMOS TechnologyIEEE Journal of Solid-State Circuits, 2010
- Dynamic dead-time controller for synchronous buck DC-DC convertersElectronics Letters, 2010
- Analysis of Switching-Loss-Reduction Methods for MHz-Switching Buck Converters2007