Compressive Strength Estimates of Adiabatically Cured Concretes Using Maturity Methods
Authors:
- 1 July 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (7)
Abstract
The strength development of standard and adiabatically cured concretes was determined. The concrete mixtures had 28-day cube strengths of 30 and 50 MPa. For both strength classes, portland cement (PC) was partially replaced with fly ash (FA) and ground granulated blast-furnace slag (GGBS) at 50% and 30%, respectively. The peak adiabatic temperature was effectively reduced with GGBS addition but was only reduced with FA addition for the lower water-to-binder ratio ( ) concrete. Considerable early age strength enhancements resulted from the adiabatic curing regime. The Nurse-Saul and Arrhenius-based maturity functions were used to estimate the increases in early age adiabatic strength. The Nurse-Saul function underestimated the effect of high early age curing temperature for all concretes, but did so to a greater extent for those with GGBS and FA, whereas the Arrhenius-based function, which allows for the consideration of an apparent activation energy, gave more-accurate estimates. Strength estimates for adiabatically cured concretes and isothermally (50°C) cured mortars were also compared, and results indicated that the latter might have been affected by the detrimental effect of high curing temperatures starting from an early age.
Keywords
This publication has 19 references indexed in Scilit:
- Maturity method to predict the evolution of the properties of sprayed concreteConstruction and Building Materials, 2015
- Effects of curing regimes and cement fineness on the compressive strength of ordinary Portland cement mortarsConstruction and Building Materials, 2011
- Maturity Method Evaluated for Various Cementitious MaterialsJournal of Materials in Civil Engineering, 2007
- Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastesCement and Concrete Research, 2007
- Strength development of mortars containing ground granulated blast-furnace slag: Effect of curing temperature and determination of apparent activation energiesCement and Concrete Research, 2006
- Investigation of blended cement hydration by isothermal calorimetry and thermal analysisCement and Concrete Research, 2005
- A maturity approach to the rate of heat evolution in concreteMagazine of Concrete Research, 2003
- Compressive strength development of concrete with different curing time and temperatureCement and Concrete Research, 1998
- Heat of hydration in concreteMagazine of Concrete Research, 1954
- Principles underlying the steam curing of concrete at atmospheric pressureMagazine of Concrete Research, 1951