Jacek Kwasny
Research Subjects
Jacek Kwasny has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Timothy A. Aiken
3 shared publications- Wei Sha
Queen’s University Belfast
3 shared publications Marios Soutsos
Professor of Materials/Structures, School of Natural and Built Environment, Queen’s Univ. Belfast, Northern Ireland BT9 5AG, UK
2 shared publicationsMark Russell
2 shared publicationsAlexandros Hatzitheodorou
Civil Engineer Consultant, 166 72 Athens, Greece
1 shared publicationDaniel McPolin
1 shared publication
Latest Publications
- Open Access
- 16 January 2026
- Published by Springer Nature in International Journal of Civil Engineering
- Vol. 24 (2) , 281-306
Development of Optimised Basalt FRP Macrofibre-Reinforced Concrete with Evaluation of Fresh, Mechanical and Durability Performance
This paper investigates the properties of an emerging fibre-reinforced concrete (FRC) incorporating basalt fibre-reinforced polymer macrofibres (BFRPmf), as dispersed, non-metallic reinforcement. The study aimed to develop BFRPmf-reinforced concrete (BFRPmfRC or BmfRC) with optimised fresh, mechanical, and durability performance by evaluating three BFRPmf types at four volume fractions (Vf = 0.25%, 0.5%, 0.75%, 1%) in a self-compacting concrete (SCC) matrix, yielding 12 mixes. Fresh properties were assessed using slump flow, V-funnel, and J-ring tests. Hardened mechanical properties were measured through compressive strength, tensile splitting strength, and direct (uniaxial) tensile tests (DTT). Durability indicators included volume of permeable voids (VPV), electrical resistivity (ER), and chloride migration coefficient (CMC). To capture full-range tensile behaviour without premature fracture, a tapered dog-bone specimen was designed for DTT, with strain monitored by digital image correlation (DIC). The 12 BmfRSCC mixes were benchmarked against a plain SCC reference. Results showed that BFRPmfs with higher slenderness and effective count reduced workability beyond 0.5% Vf but enhanced direct tensile strength by up to 70%. With homogeneous fibre dispersion, post-cracking ductility also increased, allowing tensile strains of 20–22%. Compressive strength remained within ± 10% of the reference. The optimal dosage, determined through analysis of variance (ANOVA), was 0.5% Vf, balancing rheological and mechanical behaviour. Flexural residual strength testing guided the selection of the most effective fibre type for structural trials. Durability results from tests on slab cores confirmed that, at optimal dosage, BFRPmf improved both mechanical and durability properties, highlighting its potential as a sustainable, corrosion-resistant alternative to steel reinforcement.
- 16 January 2026
- Published by Springer Nature in International Journal of Civil Engineering
- Vol. 24 (2) , 281-306
Open AccessDevelopment of Optimised Basalt FRP Macrofibre-Reinforced Concrete with Evaluation of Fresh, Mechanical and Durability Performance
This paper investigates the properties of an emerging fibre-reinforced concrete (FRC) incorporating basalt fibre-reinforced polymer macrofibres (BFRPmf), as dispersed, non-metallic reinforcement. The study aimed to develop BFRPmf-reinforced concrete (BFRPmfRC or BmfRC) with optimised fresh, mechanical, and durability performance by evaluating three BFRPmf types at four volume fractions (Vf = 0.25%, 0.5%, 0.75%, 1%) in a self-compacting concrete (SCC) matrix, yielding 12 mixes. Fresh properties were assessed using slump flow, V-funnel, and J-ring tests. Hardened mechanical properties were measured through compressive strength, tensile splitting strength, and direct (uniaxial) tensile tests (DTT). Durability indicators included volume of permeable voids (VPV), electrical resistivity (ER), and chloride migration coefficient (CMC). To capture full-range tensile behaviour without premature fracture, a tapered dog-bone specimen was designed for DTT, with strain monitored by digital image correlation (DIC). The 12 BmfRSCC mixes were benchmarked against a plain SCC reference. Results showed that BFRPmfs with higher slenderness and effective count reduced workability beyond 0.5% Vf but enhanced direct tensile strength by up to 70%. With homogeneous fibre dispersion, post-cracking ductility also increased, allowing tensile strains of 20–22%. Compressive strength remained within ± 10% of the reference. The optimal dosage, determined through analysis of variance (ANOVA), was 0.5% Vf, balancing rheological and mechanical behaviour. Flexural residual strength testing guided the selection of the most effective fibre type for structural trials. Durability results from tests on slab cores confirmed that, at optimal dosage, BFRPmf improved both mechanical and durability properties, highlighting its potential as a sustainable, corrosion-resistant alternative to steel reinforcement.
- Open Access
- 30 September 2022
- Published by Elsevier in Cement and Concrete Composites
- Vol. 134
Effect of partial MgO replacement on the properties of magnesium oxychloride cement
- 30 September 2022
- Published by Elsevier in Cement and Concrete Composites
- Vol. 134
Open AccessEffect of partial MgO replacement on the properties of magnesium oxychloride cement
- Open Access
- 11 June 2022
- Published by Elsevier in Construction and Building Materials
- Vol. 342
Acid resistance of alkali-activated binders: A review of performance, mechanisms of deterioration and testing procedures
- 11 June 2022
- Published by Elsevier in Construction and Building Materials
- Vol. 342
Open AccessAcid resistance of alkali-activated binders: A review of performance, mechanisms of deterioration and testing procedures
- Open Access
- 1 June 2021
- Published by Elsevier in Cleaner Engineering and Technology
- Vol. 2
Performance of cementless binders produced from industrial waste products in strong acid
- 1 June 2021
- Published by Elsevier in Cleaner Engineering and Technology
- Vol. 2
Open AccessPerformance of cementless binders produced from industrial waste products in strong acid
- 1 July 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (7)
Compressive Strength Estimates of Adiabatically Cured Concretes Using Maturity Methods
The strength development of standard and adiabatically cured concretes was determined. The concrete mixtures had 28-day cube strengths of 30 and 50 MPa. For both strength classes, portland cement (PC) was partially replaced with fly ash (FA) and ground granulated blast-furnace slag (GGBS) at 50% and 30%, respectively. The peak adiabatic temperature was effectively reduced with GGBS addition but was only reduced with FA addition for the lower water-to-binder ratio ( ) concrete. Considerable early age strength enhancements resulted from the adiabatic curing regime. The Nurse-Saul and Arrhenius-based maturity functions were used to estimate the increases in early age adiabatic strength. The Nurse-Saul function underestimated the effect of high early age curing temperature for all concretes, but did so to a greater extent for those with GGBS and FA, whereas the Arrhenius-based function, which allows for the consideration of an apparent activation energy, gave more-accurate estimates. Strength estimates for adiabatically cured concretes and isothermally (50°C) cured mortars were also compared, and results indicated that the latter might have been affected by the detrimental effect of high curing temperatures starting from an early age.- 1 July 2019
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (7)
Compressive Strength Estimates of Adiabatically Cured Concretes Using Maturity Methods
The strength development of standard and adiabatically cured concretes was determined. The concrete mixtures had 28-day cube strengths of 30 and 50 MPa. For both strength classes, portland cement (PC) was partially replaced with fly ash (FA) and ground granulated blast-furnace slag (GGBS) at 50% and 30%, respectively. The peak adiabatic temperature was effectively reduced with GGBS addition but was only reduced with FA addition for the lower water-to-binder ratio ( ) concrete. Considerable early age strength enhancements resulted from the adiabatic curing regime. The Nurse-Saul and Arrhenius-based maturity functions were used to estimate the increases in early age adiabatic strength. The Nurse-Saul function underestimated the effect of high early age curing temperature for all concretes, but did so to a greater extent for those with GGBS and FA, whereas the Arrhenius-based function, which allows for the consideration of an apparent activation energy, gave more-accurate estimates. Strength estimates for adiabatically cured concretes and isothermally (50°C) cured mortars were also compared, and results indicated that the latter might have been affected by the detrimental effect of high curing temperatures starting from an early age.- Open Access
- 1 March 2019
- Published by Elsevier in Science of The Total Environment
- Vol. 658, 141-151
Radiological evaluation of industrial residues for construction purposes correlated with their chemical properties
- 1 March 2019
- Published by Elsevier in Science of The Total Environment
- Vol. 658, 141-151
Open AccessRadiological evaluation of industrial residues for construction purposes correlated with their chemical properties
- Open Access
- 1 October 2018
- Published by Elsevier in Construction and Building Materials
- Vol. 187, 635-651
Comparison of the effect of mix proportion parameters on behaviour of geopolymer and Portland cement mortars
- 1 October 2018
- Published by Elsevier in Construction and Building Materials
- Vol. 187, 635-651
Open AccessComparison of the effect of mix proportion parameters on behaviour of geopolymer and Portland cement mortars