Self-Supporting Microchannel Liquid-Cooled Plate for T/R Modules Based on Additive Manufacturing: Study on Its Pass Design, Formation Process and Boiling Heat Transfer Performance
Open Access
Abstract
The additive manufacturing technology of laser-based powder bed fusion (L-PBF), which is used to produce boiling heat transfer structures, offers a high processing flexibility and can provide lattice structures with a high surface-to-volume ratio. As an important part of the phased array radar, the plentiful transmit/receive (T/R) modules can generate considerable heat. Targeting this local overheating problem, this study discusses the pass design, the optimal formation process, and boiling heat transfer performance of microchannel liquid-cooled plates based on L-PBF additive manufacturing technology. The optimum design and process parameters were obtained by performing basic channel experiments. On this basis, the design and formation experiments of the microchannel structure were performed, and then the porosity and pore morphology of microchannel liquid-cooled plate samples were analysed. The boiling heat transfer experiments were conducted with deionised water, and the boiling heat transfer characteristics were compared with the saturated boiling curve of a traditional copper-tube liquid-cooled plate. The average wall temperature of the designed samples decreased by 4% compared with that of the traditional liquid-cooled plate under the same heat flow density the value reduced from 111.9 °C to 108.2 °C. Furthermore, within the same optimal boiling temperature range, the average heat flow densities of all the prepared samples increased by >60% compared with those of the traditional liquid-cooled plate the value increased from minimum 16 W∙cm−2 to maximum 34 W∙cm−2. The self-supporting microchannel structure can considerably improve the heat dissipation effect of T/R modules and solve the local overheating problem.Keywords
Funding Information
- Ministry of Science and Technology of China (2018YFB1105300)
This publication has 24 references indexed in Scilit:
- Compensation strategy to reduce geometry and mechanics mismatches in porous biomaterials built with Selective Laser MeltingJournal of the Mechanical Behavior of Biomedical Materials, 2017
- Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulationAdditive Manufacturing, 2016
- Saturated pool boiling of FC-72 from enhanced surfaces produced by Selective Laser MeltingInternational Journal of Heat and Mass Transfer, 2016
- Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structuresAdditive Manufacturing, 2015
- Experimental correlation for pool boiling heat transfer on metallic foam surface and bubble cluster growth behavior on grooved array foam surfaceInternational Journal of Heat and Mass Transfer, 2014
- The Roadmap for Additive Manufacturing and Its Impact3D Printing and Additive Manufacturing, 2014
- Trend Analysis for the Market and Application Development of 3D PrintingInternational Journal of Automation and Smart Technology, 2014
- A novel method for manufacturing sintered aluminium heat pipes (SAHP)Applied Thermal Engineering, 2013
- Micro and miniature heat pipes – Electronic component coolersApplied Thermal Engineering, 2008
- Heat transfer and bubble formation in pool boiling: Effect of basic surface modifications for heat transfer enhancementInternational Journal of Thermal Sciences, 2006