Prediction and reduction of dynamic factor based on dynamic behavior of gear systems
Authors:
Preprint
- 13 January 2026
- preprint
- Published by Springer Nature in Research Square
Abstract
Gears operating at high rotational speeds are prone to resonance-induced load amplification, which can significantly shorten their service life. This study quantifies the dynamic factor (\(\:{K}_{v}\)) of a spur gear pair operating between 500 and 4,000 rpm by combining high-fidelity dynamics simulations with targeted experiments. The simulation model, validated against experimentally measured dynamic meshing forces, accurately reproduces the primary resonance at 3,450 rpm with a mere 2.5% error in \(\:{K}_{v}\). A comparison with calculations based on ISO 6336 Method B reveals that this standard tends to overestimate both the resonance speed and \(\:{K}_{v}\), leading to unnecessarily conservative designs. Parametric studies show that increasing the torque from 100 N·m to 500 N·m reduces \(\:{K}_{v}\) by up to 14%, while crowning that reduces the peak-to-peak transmission error from 4.5 µm to 2.0 µm attenuates \(\:{K}_{v}\) by 22% and suppresses contact stress amplification. These findings demonstrate that validated simulations enable more accurate resonance prediction and promote more weight-efficient gear design for high-speed applications than empirical ISO formulas.
Keywords
All Related Versions
- Version 1, 2026-01-13, Research Square
- Published version: Scientific Reports, 16 (1), 11835.
This publication has 30 references indexed in Scilit:
- General Meshing Modeling and Dynamic Characteristics Analysis of Helical Gear Pair with Tooth Surface DeviationIranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2024
- A new experimental method for calculating mesh stiffness in healthy and cracked straight bevel gear systemMeasurement, 2023
- Dynamic characteristics of a spur gear pair under the coupled effects of angular misalignment fault and tooth modificationInternational Journal of Non-Linear Mechanics, 2023
- Influences of gear design parameters on dynamic tooth loads and time-varying mesh stiffness of involute spur gearsSādhanā, 2020
- Effects of tooth modifications on the dynamic characteristics of thin-rimmed gears under surface wearMechanism and Machine Theory, 2020
- A rotating gear test methodology for evaluation of high-cycle tooth bending fatigue lives under fully reversed and fully released loading conditionsInternational Journal of Fatigue, 2020
- Load-related dynamic behaviors of a helical gear pair with tooth flank errorsJournal of Mechanical Science and Technology, 2018
- Time-synchronous-averaging of gear-meshing-vibration transducer responses for elimination of harmonic contributions from the mating gear and the gear pairMechanical Systems and Signal Processing, 2015
- On gear tooth stiffness evaluationComputers & Structures, 2014
- Experiments on the relationship between the dynamic transmission error and the dynamic stress factor of spur gear pairsMechanism and Machine Theory, 2013