Application of a Tensile Test Method to Identify the Ductile-Brittle Transition of Caramel
Open Access
Abstract
During cutting of foods, tensile stresses in front of the blade are responsible for the separation of the material. Therefore, tensile tests can be helpful to gain knowledge on deformation properties related to pre-fracture cutting behavior as well as on phenomena in the fracture zone, which are velocity-dependent in viscoelastic materials. The aim of this work was to apply a tensile test method for model caramels to investigate their behavior and to identify conditions where the ductile-brittle transition occurs. After executing pre-trials, tensile velocity, caramel moisture, and temperature were the parameters that were varied for this purpose. In general, increasing velocity, decreasing temperature, and decreasing moisture resulted in a stiffer response and caused a shift from a ductile to a more brittle behavior, attributable to reduced viscous contributions to the material and longer relaxation times. Fracture strain was notably lower than the maximum plastic elongation in the ductile case, but we observed equalization close to the ductile-brittle transition point for our material. This study serves as basis for an in-depth research on the complex deformation and fracture phenomena during cutting of viscoelastic food systems, including numerical modeling.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (RO 3454/7-1)
This publication has 31 references indexed in Scilit:
- On the sharpness of straight edge blades in cutting soft solids: Part II – Analysis of blade geometryEngineering Fracture Mechanics, 2010
- A practical and systematic review of Weibull statistics for reporting strengths of dental materialsDental Materials, 2010
- Fracture properties of potato crispsInternational Journal of Food Science and Technology, 2008
- Tensile Test of Cabbage Leaves for Quality Evaluation of Shredded CabbageFood Science and Technology Research, 2008
- A Finite Element Model for Ultrasonic Cutting of ToffeeApplied Mechanics and Materials, 2006
- Application of fracture mechanics to the texture of foodEngineering Failure Analysis, 2004
- Measurement of stress and strain during tensile testing of gellan gum gels: effect of deformation speedCarbohydrate Polymers, 2002
- AN ENGINEERING METHOD TO EVALUATE THE CRISP TEXTURE OF FRUIT AND VEGETABLESJournal of Texture Studies, 2000
- Large deformation and fracture behaviour of gelsCurrent Opinion in Colloid & Interface Science, 1996
- FRACTURE PROPERTIES OF STARCH GELS AND THEIR RATE DEPENDENCYJournal of Texture Studies, 1995