Susann Zahn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Susann Zahn has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Harald Rohm
Chair of Food Engineering, Institute of Natural Materials Technology, Technische Universitaet Dresden, Dresden, Germany, Germany
10 shared publications - Christiane Drechsel
Chair of Food Engineering Technische Universität Dresden 01062 Dresden Germany
2 shared publications - Dennis Schab
Chair of Food Engineering, Institute of Natural Materials Technology, Technische Universität Dresden, 01062 Dresden, Germany
2 shared publications - Yvonne Schneider
Technische Universität Dresden
2 shared publications Annett Wehner
Institute of Food Technology and Bioprocess Engineering, Technische Universität Dresden, 01069 Dresden, Germany
1 shared publicationBoris M Velichkovsky
Department of Engineering Psychology and Cognitive Ergonomics, Institute of Psychology III, Technische Universität Dresden, 01062 Dresden, Germany
1 shared publication
Latest Publications
- Open Access
- 11 September 2026
- Published by Elsevier in Journal of Food Engineering
- Vol. 424
Linking small and large deformation mechanics in a rate-dependent sugar-based food through time-temperature superposition
- 11 September 2026
- Published by Elsevier in Journal of Food Engineering
- Vol. 424
Open AccessLinking small and large deformation mechanics in a rate-dependent sugar-based food through time-temperature superposition
- Open Access
- 19 December 2025
- Published by Elsevier in Food and Bioproducts Processing
- Vol. 156, 1-23
CFD-investigation of suspension-based pigs in chocolate processing plants
- 19 December 2025
- Published by Elsevier in Food and Bioproducts Processing
- Vol. 156, 1-23
Open AccessCFD-investigation of suspension-based pigs in chocolate processing plants
- Open Access
Application of a Tensile Test Method to Identify the Ductile-Brittle Transition of Caramel
During cutting of foods, tensile stresses in front of the blade are responsible for the separation of the material. Therefore, tensile tests can be helpful to gain knowledge on deformation properties related to pre-fracture cutting behavior as well as on phenomena in the fracture zone, which are velocity-dependent in viscoelastic materials. The aim of this work was to apply a tensile test method for model caramels to investigate their behavior and to identify conditions where the ductile-brittle transition occurs. After executing pre-trials, tensile velocity, caramel moisture, and temperature were the parameters that were varied for this purpose. In general, increasing velocity, decreasing temperature, and decreasing moisture resulted in a stiffer response and caused a shift from a ductile to a more brittle behavior, attributable to reduced viscous contributions to the material and longer relaxation times. Fracture strain was notably lower than the maximum plastic elongation in the ductile case, but we observed equalization close to the ductile-brittle transition point for our material. This study serves as basis for an in-depth research on the complex deformation and fracture phenomena during cutting of viscoelastic food systems, including numerical modeling.
Open AccessApplication of a Tensile Test Method to Identify the Ductile-Brittle Transition of Caramel
During cutting of foods, tensile stresses in front of the blade are responsible for the separation of the material. Therefore, tensile tests can be helpful to gain knowledge on deformation properties related to pre-fracture cutting behavior as well as on phenomena in the fracture zone, which are velocity-dependent in viscoelastic materials. The aim of this work was to apply a tensile test method for model caramels to investigate their behavior and to identify conditions where the ductile-brittle transition occurs. After executing pre-trials, tensile velocity, caramel moisture, and temperature were the parameters that were varied for this purpose. In general, increasing velocity, decreasing temperature, and decreasing moisture resulted in a stiffer response and caused a shift from a ductile to a more brittle behavior, attributable to reduced viscous contributions to the material and longer relaxation times. Fracture strain was notably lower than the maximum plastic elongation in the ductile case, but we observed equalization close to the ductile-brittle transition point for our material. This study serves as basis for an in-depth research on the complex deformation and fracture phenomena during cutting of viscoelastic food systems, including numerical modeling.
- Open Access
- 26 June 2022
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 57 (10) , 6755-6762
Solubility and swelling of soils from native starch
Summary: The cleaning of food processing plants is essential for ensuring compliance with quality and hygiene standards. Properties of food‐borne soils such as solubility and swelling are relevant and provide information concerning their cleanability. In the context of cleaning processes in food industry, the aim of this study was to determine the impact that different cleaning fluids exhibit on the solubility and swelling behaviour of soils consisting of amylose‐ rich native maize, wheat, rice or potato starch or amylopectin rich native waxy maize starch. For this purpose, a process for the preparation of starch pastepowder, mimicking starch soils, was developed. After swelling in water or 20 g kg−1 NaOH at 25 or 55 °C, the solubility and the water binding capacity (WBC) of the starch powders were determined. The solubility of amylose rich starch paste powders was significantly higher in NaOH, whereas amylopectin rich waxy maize starch paste powder dissolved significantly better in water. The use of NaOH resulted in a significant decrease of the WBC of most starches. While a higher solubility and WBC was found for wet maize starch soils (starch paste) than for dried maize starch soils (starch paste powder), solubility and swelling of waxy maize starch soils were not affected by the residual moisture.
- 26 June 2022
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 57 (10) , 6755-6762
Open AccessSolubility and swelling of soils from native starch
Summary: The cleaning of food processing plants is essential for ensuring compliance with quality and hygiene standards. Properties of food‐borne soils such as solubility and swelling are relevant and provide information concerning their cleanability. In the context of cleaning processes in food industry, the aim of this study was to determine the impact that different cleaning fluids exhibit on the solubility and swelling behaviour of soils consisting of amylose‐ rich native maize, wheat, rice or potato starch or amylopectin rich native waxy maize starch. For this purpose, a process for the preparation of starch pastepowder, mimicking starch soils, was developed. After swelling in water or 20 g kg−1 NaOH at 25 or 55 °C, the solubility and the water binding capacity (WBC) of the starch powders were determined. The solubility of amylose rich starch paste powders was significantly higher in NaOH, whereas amylopectin rich waxy maize starch paste powder dissolved significantly better in water. The use of NaOH resulted in a significant decrease of the WBC of most starches. While a higher solubility and WBC was found for wet maize starch soils (starch paste) than for dried maize starch soils (starch paste powder), solubility and swelling of waxy maize starch soils were not affected by the residual moisture.
- 7 October 2021
- Published by Conscientia Beam in Journal of Food Technology Research
- Vol. 8 (2) , 40-49
Enriching Tiger Nut Milk with Sodium Caseinate and Xanthan Gum Improves the Physical Stability and Consumer Acceptability
Tiger nut milk (TNM) shows limited colloidal stability, which affects consumer acceptability in many parts of the world where tiger nut is cultivated. In this study, addition of proteins and hydrocolloids was used for improving the stability, and the impact on physical properties and consumer acceptance is reported. Enriching TNM by 3 g/100 g sodium caseinate and 0.1 g/100 g xanthan gum successfully impeded creaming and serum formation and resulted in a decrease of the instability index from 0.408 ± 0.023 to 0.015 ± 0.00 after applying forced sedimentation at 3000 x g for 2 h. After TNM enrichment, the viscosity of TNM increased from 3.0 ± 0.10 mPa.s to 285 ± 18 mPa.s which remained stable at elevated storage temperature. Flash profiling of TNM resulted in emerging descriptors namely sweet, sediment, watery, raw. Hedonic assessment by 82 consumers showed that plain TNM had the lowest rating concerning particular sensory attributes and acceptance. Enrichment resulted in more viscous, sweet and thick TNM products, leading to higher consumer ratings of attributes and acceptability. Thus, enriching TNM by sodium caseinates and xanthan gum is promising for improving the dispersion stability and consumer acceptance.
- 7 October 2021
- Published by Conscientia Beam in Journal of Food Technology Research
- Vol. 8 (2) , 40-49
Enriching Tiger Nut Milk with Sodium Caseinate and Xanthan Gum Improves the Physical Stability and Consumer Acceptability
Tiger nut milk (TNM) shows limited colloidal stability, which affects consumer acceptability in many parts of the world where tiger nut is cultivated. In this study, addition of proteins and hydrocolloids was used for improving the stability, and the impact on physical properties and consumer acceptance is reported. Enriching TNM by 3 g/100 g sodium caseinate and 0.1 g/100 g xanthan gum successfully impeded creaming and serum formation and resulted in a decrease of the instability index from 0.408 ± 0.023 to 0.015 ± 0.00 after applying forced sedimentation at 3000 x g for 2 h. After TNM enrichment, the viscosity of TNM increased from 3.0 ± 0.10 mPa.s to 285 ± 18 mPa.s which remained stable at elevated storage temperature. Flash profiling of TNM resulted in emerging descriptors namely sweet, sediment, watery, raw. Hedonic assessment by 82 consumers showed that plain TNM had the lowest rating concerning particular sensory attributes and acceptance. Enrichment resulted in more viscous, sweet and thick TNM products, leading to higher consumer ratings of attributes and acceptability. Thus, enriching TNM by sodium caseinates and xanthan gum is promising for improving the dispersion stability and consumer acceptance.
- Open Access
Development of a Caramel-Based Viscoelastic Reference Material for Cutting Tests at Different Rates
Cutting speed plays a crucial role for the behavior during and the final quality of viscoelastic foods after cutting and is, in industrial applications, usually adjusted on an empirical basis. Although previous studies investigated the interplay between the time-dependent properties and cutting behavior of model systems on an elastomer basis, there is still a need to elaborate such cause-effect relations for real foods. The aim of this study was to establish a reproducible manufacture of model caramels on a laboratory scale and to investigate the influence of the compositional parameters, moisture, and solid fat content, as well as cutting speed, on cutting behavior. It was possible to visualize ductile-brittle transitions in cutting force profiles, with an increase in cutting speed resulting in effects similar to that induced by a decreasing moisture content or an increasing solid fat content. Quantitatively, the progression of both maximum force and cutting energy reversed when cutting speed increased and composition changed in favor of a more brittle behavior. This work provides the basis for further research on distinct loading phenomena observed during the cutting of foods and for numerical modeling of the cutting process.
Open AccessDevelopment of a Caramel-Based Viscoelastic Reference Material for Cutting Tests at Different Rates
Cutting speed plays a crucial role for the behavior during and the final quality of viscoelastic foods after cutting and is, in industrial applications, usually adjusted on an empirical basis. Although previous studies investigated the interplay between the time-dependent properties and cutting behavior of model systems on an elastomer basis, there is still a need to elaborate such cause-effect relations for real foods. The aim of this study was to establish a reproducible manufacture of model caramels on a laboratory scale and to investigate the influence of the compositional parameters, moisture, and solid fat content, as well as cutting speed, on cutting behavior. It was possible to visualize ductile-brittle transitions in cutting force profiles, with an increase in cutting speed resulting in effects similar to that induced by a decreasing moisture content or an increasing solid fat content. Quantitatively, the progression of both maximum force and cutting energy reversed when cutting speed increased and composition changed in favor of a more brittle behavior. This work provides the basis for further research on distinct loading phenomena observed during the cutting of foods and for numerical modeling of the cutting process.
- 10 March 2018
- Published by Springer Nature in European Food Research and Technology
- Vol. 244 (8) , 1407-1414
Diversity of sensory profiles and physicochemical characteristics of commercial hot chocolate drinks from cocoa powders and block chocolates
- 10 March 2018
- Published by Springer Nature in European Food Research and Technology
- Vol. 244 (8) , 1407-1414
Diversity of sensory profiles and physicochemical characteristics of commercial hot chocolate drinks from cocoa powders and block chocolates
- Open Access
Dairy-Based Emulsions: Viscosity Affects Fat Difference Thresholds and Sweetness Perception
In complex emulsions, viscosity or viscosity-associated sensory attributes such as creaminess are important for quality assessment and product differentiation. Two sets of emulsions with fat or locust bean gum content being varied at seven levels were developed; the two emulsions at each level had similar apparent viscosity. Additionally, sugar concentration was kept constant either with respect to total emulsion, or with respect to the aqueous phase. Series of two-alternative forced choice tests were performed with one constant stimulus, and just noticeable differences were calculated using probability regression. The results show that, when viscosity was not compensated, it was easy for the subjects to (a) distinguish emulsions with different fat content when the fat content was addressed in the question, and to (b) distinguish emulsions with different fat or locust bean gum content when creaminess was addressed. For the latter descriptor, it is of minor importance whether viscosity is altered by fat content or a thickener. Weber fractions that were calculated for viscosity were approximately 0.20. The quantitative effects of viscosity on sweetness, however, depend on how product rheology was modified.
Open AccessDairy-Based Emulsions: Viscosity Affects Fat Difference Thresholds and Sweetness Perception
In complex emulsions, viscosity or viscosity-associated sensory attributes such as creaminess are important for quality assessment and product differentiation. Two sets of emulsions with fat or locust bean gum content being varied at seven levels were developed; the two emulsions at each level had similar apparent viscosity. Additionally, sugar concentration was kept constant either with respect to total emulsion, or with respect to the aqueous phase. Series of two-alternative forced choice tests were performed with one constant stimulus, and just noticeable differences were calculated using probability regression. The results show that, when viscosity was not compensated, it was easy for the subjects to (a) distinguish emulsions with different fat content when the fat content was addressed in the question, and to (b) distinguish emulsions with different fat or locust bean gum content when creaminess was addressed. For the latter descriptor, it is of minor importance whether viscosity is altered by fat content or a thickener. Weber fractions that were calculated for viscosity were approximately 0.20. The quantitative effects of viscosity on sweetness, however, depend on how product rheology was modified.
- 6 February 2012
- Published by Elsevier in Journal of Food Engineering
- Vol. 111 (1) , 186-189
Influence of the type of gelatinized starch on the soiling of stainless steel
- 6 February 2012
- Published by Elsevier in Journal of Food Engineering
- Vol. 111 (1) , 186-189
Influence of the type of gelatinized starch on the soiling of stainless steel