Field measurements of multiaxial strength of weak snow layers
Open Access
- 15 October 2026
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 72, e103
Abstract
Dry-snow slab avalanche release is initiated by a failure in a buried weak layer. Quantifying the multiaxial strength of weak snow layers is therefore essential, yet field measurements remain scarce compared to laboratory or numerical studies. We developed a mobile testing machine to quantify the multiaxial strength of weak snow layers in the field. We measured the strength of two layers of buried surface hoar: SH24 (43 samples) and SH25 (75 samples), and derived the corresponding failure envelopes. Even though the strength values exhibited considerable scatter, the data were described by an elliptical failure envelope. Compressive strength exceeded shear strength for both layers, with higher strength values for SH24 ( sigma c equals 7.9 plus or minus 0.6 kPa $\sigma_\mathrm{c} = 7.9 \pm 0.6\,\mathrm{kPa}$ , tau c equals 5.8 plus or minus 0.4 kPa $\tau_\mathrm{c} = 5.8 \pm 0.4\,\mathrm{kPa}$ ) compared to SH25 ( sigma c equals 5.0 plus or minus 0.3 kPa $\sigma_\mathrm{c} = 5.0 \pm 0.3\,\mathrm{kPa}$ , tau c equals 3.5 plus or minus 0.2 kPa $\tau_\mathrm{c} = 3.5 \pm 0.2\,\mathrm{kPa}$ ). Micro-computed tomography analysis revealed differences in microstructural parameters, most notably indicating that SH25 had a finer and more connected structure. Video-based digital image correlation showed that the effective strain rates in the weak layers were on the order of 10 minus 3 $^{-3}$ s minus 1 $^{-1}$ and typically larger in shear than in compression. This work provides multiaxial strength data of weak layers, valuable for comparison with laboratory experiments and for informing numerical models.
Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (460195514)
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (201071)
This publication has 28 references indexed in Scilit:
- The influence of snow microstructure on the compressive mechanical properties of weak snowpack layersActa Materialia, 2025
- Numerical investigation of the mixed-mode failure of snowComputational Particle Mechanics, 2019
- Determination of failure envelope for faceted snow through numerical simulationsCold Regions Science and Technology, 2015
- A new mixed‐mode failure criterion for weak snowpack layersGeophysical Research Letters, 2015
- Image Correlation for Shape, Motion and Deformation Measurements2009
- Snowpack properties associated with fracture initiation and propagation resulting in skier-triggered dry snow slab avalanchesCold Regions Science and Technology, 2007
- A threshold sum approach to stability evaluation of manual snow profilesCold Regions Science and Technology, 2007
- Tomography of temperature gradient metamorphism of snow and associated changes in heat conductivityHydrological Processes, 2004
- Snowpack factors associated with strength changes of buried surface hoar layersCold Regions Science and Technology, 1999
- The shear strength index of alpine snowCold Regions Science and Technology, 1982