Philipp Weißgraeber
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Philipp Weißgraeber has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Philipp Laurens Rosendahl
Institute of Structural Mechanics and Design, Technical University of Darmstadt, Darmstadt, Germany
27 shared publications - Alec van Herwijnen
WSL Institute for Snow and Avalanche Research SLF, Davos, Switzerland
21 shared publications Valentin Adam
WSL Institute for Snow and Avalanche Research SLF, Davos, Switzerland
16 shared publications- Jakob Schöttner
WSL Institute for Snow and Avalanche Research SLF, Davos, Switzerland
15 shared publications - Jürg Schweizer
WSL Institute for Snow and Avalanche Research SLF (Davos, Switzerland)
14 shared publications - Florian Rheinschmidt
Institute of Structural Mechanics and Design, Technical University of Darmstadt, Darmstadt, Germany
11 shared publications
Latest Publications
- Open Access
- 2 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Comment on egusphere-2026-3554
Mixed-mode fracture toughness of natural snow weak layers has rarely been measured directly, yet it is a key parameter governing dry-snow slab avalanche release on inclined, snow-covered slopes. Most prior estimates relied on assumed elastic properties of slab and weak layer rather than direct measurements. Here, we present field-based fracture experiments investigating the seasonal evolution of the mixed-mode fracture toughness of a natural weak layer composed of faceted crystals. We introduce a novel method that combines digital image correlation of snow displacement fields with inverse modeling to derive effective elastic properties of both the weak layer and the overlying slab. These experimentally constrained elastic properties provided more robust estimates of weak layer fracture toughness than previously possible. Results show a clear increase in fracture toughness over the season from 0.29 ± 0.042 J m-2 to 0.67 ± 0.06 J m-2 in mode I and from 0.10 ± 0.022 J m-2 to 1.0 ± 0.1 J m-2 in mode II. The effective elastic modulus of the weak layer evolved from approximately 0.63 ± 0.094 MPa at the beginning of the measurement period to 0.40 ± 0.046 MPa later in the season, while slab elasticity increased from 16 ± 1 MPa at the start to 40 ± 2 MPa. Furthermore, micro-computed tomography and manual snow profiles revealed that, although the weak layer density remained nearly constant, the specific surface area decreased and the mean local ice and pore thickness increased, as did the grain size. These findings suggest that the increases in both mode I and mode II fracture toughness are associated with grain size growth and growth of the bonds between the grains. The study further demonstrates that displacement-constrained inverse modeling provides robust snow elastic properties, improving fracture-mechanical estimates of avalanche release processes.
- 2 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Open AccessComment on egusphere-2026-3554
Mixed-mode fracture toughness of natural snow weak layers has rarely been measured directly, yet it is a key parameter governing dry-snow slab avalanche release on inclined, snow-covered slopes. Most prior estimates relied on assumed elastic properties of slab and weak layer rather than direct measurements. Here, we present field-based fracture experiments investigating the seasonal evolution of the mixed-mode fracture toughness of a natural weak layer composed of faceted crystals. We introduce a novel method that combines digital image correlation of snow displacement fields with inverse modeling to derive effective elastic properties of both the weak layer and the overlying slab. These experimentally constrained elastic properties provided more robust estimates of weak layer fracture toughness than previously possible. Results show a clear increase in fracture toughness over the season from 0.29 ± 0.042 J m-2 to 0.67 ± 0.06 J m-2 in mode I and from 0.10 ± 0.022 J m-2 to 1.0 ± 0.1 J m-2 in mode II. The effective elastic modulus of the weak layer evolved from approximately 0.63 ± 0.094 MPa at the beginning of the measurement period to 0.40 ± 0.046 MPa later in the season, while slab elasticity increased from 16 ± 1 MPa at the start to 40 ± 2 MPa. Furthermore, micro-computed tomography and manual snow profiles revealed that, although the weak layer density remained nearly constant, the specific surface area decreased and the mean local ice and pore thickness increased, as did the grain size. These findings suggest that the increases in both mode I and mode II fracture toughness are associated with grain size growth and growth of the bonds between the grains. The study further demonstrates that displacement-constrained inverse modeling provides robust snow elastic properties, improving fracture-mechanical estimates of avalanche release processes.
- Open Access
- 28 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Comment on egusphere-2026-3554
Mixed-mode fracture toughness of natural snow weak layers has rarely been measured directly, yet it is a key parameter governing dry-snow slab avalanche release on inclined, snow-covered slopes. Most prior estimates relied on assumed elastic properties of slab and weak layer rather than direct measurements. Here, we present field-based fracture experiments investigating the seasonal evolution of the mixed-mode fracture toughness of a natural weak layer composed of faceted crystals. We introduce a novel method that combines digital image correlation of snow displacement fields with inverse modeling to derive effective elastic properties of both the weak layer and the overlying slab. These experimentally constrained elastic properties provided more robust estimates of weak layer fracture toughness than previously possible. Results show a clear increase in fracture toughness over the season from 0.29 ± 0.042 J m-2 to 0.67 ± 0.06 J m-2 in mode I and from 0.10 ± 0.022 J m-2 to 1.0 ± 0.1 J m-2 in mode II. The effective elastic modulus of the weak layer evolved from approximately 0.63 ± 0.094 MPa at the beginning of the measurement period to 0.40 ± 0.046 MPa later in the season, while slab elasticity increased from 16 ± 1 MPa at the start to 40 ± 2 MPa. Furthermore, micro-computed tomography and manual snow profiles revealed that, although the weak layer density remained nearly constant, the specific surface area decreased and the mean local ice and pore thickness increased, as did the grain size. These findings suggest that the increases in both mode I and mode II fracture toughness are associated with grain size growth and growth of the bonds between the grains. The study further demonstrates that displacement-constrained inverse modeling provides robust snow elastic properties, improving fracture-mechanical estimates of avalanche release processes.
- 28 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Open AccessComment on egusphere-2026-3554
Mixed-mode fracture toughness of natural snow weak layers has rarely been measured directly, yet it is a key parameter governing dry-snow slab avalanche release on inclined, snow-covered slopes. Most prior estimates relied on assumed elastic properties of slab and weak layer rather than direct measurements. Here, we present field-based fracture experiments investigating the seasonal evolution of the mixed-mode fracture toughness of a natural weak layer composed of faceted crystals. We introduce a novel method that combines digital image correlation of snow displacement fields with inverse modeling to derive effective elastic properties of both the weak layer and the overlying slab. These experimentally constrained elastic properties provided more robust estimates of weak layer fracture toughness than previously possible. Results show a clear increase in fracture toughness over the season from 0.29 ± 0.042 J m-2 to 0.67 ± 0.06 J m-2 in mode I and from 0.10 ± 0.022 J m-2 to 1.0 ± 0.1 J m-2 in mode II. The effective elastic modulus of the weak layer evolved from approximately 0.63 ± 0.094 MPa at the beginning of the measurement period to 0.40 ± 0.046 MPa later in the season, while slab elasticity increased from 16 ± 1 MPa at the start to 40 ± 2 MPa. Furthermore, micro-computed tomography and manual snow profiles revealed that, although the weak layer density remained nearly constant, the specific surface area decreased and the mean local ice and pore thickness increased, as did the grain size. These findings suggest that the increases in both mode I and mode II fracture toughness are associated with grain size growth and growth of the bonds between the grains. The study further demonstrates that displacement-constrained inverse modeling provides robust snow elastic properties, improving fracture-mechanical estimates of avalanche release processes.
- Open Access
- 22 October 2026
- Published by Elsevier in SSRN Electronic Journal
Probabilistic analysis of crack arrest following initiation under quasi-static loading
In negative geometries, notch-nucleated cracks propagate unstably and arrest between a lower bound, where the energy release rate drops to the fracture toughness, and an upper bound, where all excess energy is consumed. Measured arrest lengths scatter considerably, but the causes remain unquantified. To identify them, crack initiation and arrest in compressed V-notched rhombus-hole PMMA specimens are analyzed probabilistically using the coupled criterion of finite fracture mechanics. Measurement and literature-based scatter are propagated by Monte Carlo simulation (25000 Latin Hypercube samples) and assessed by sensitivity analyses. For a representative geometry, the scatter of the initiation force (coefficient of variation = 8.5%) is dominated by the fracture toughness (first-order Sobol index = 0.80), that of the initiation length by the tensile strength (0.57), and that of both arrest-length bounds by the notch opening angle (0.50, 0.47). Within its measured tolerance (about +/-3°), this angle changes the predicted arrest length by 55%; hence, measured arrest lengths reveal little about the initiation length. For opening angles β ≥ 90°, 92% of published PMMA experiments fall within the predicted 5th–95th percentile range of the initiation force, and measured arrest lengths lie near the lower bound. The mean initiation force is overestimated 5.0% on average and by up to 17.9% for the smallest opening angle and hole size, which is attributed to manufacturing imperfections. Future experiments should characterize the tested batch's material properties, measure each specimen's notch geometry, and favor large opening angles.
- 22 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessProbabilistic analysis of crack arrest following initiation under quasi-static loading
In negative geometries, notch-nucleated cracks propagate unstably and arrest between a lower bound, where the energy release rate drops to the fracture toughness, and an upper bound, where all excess energy is consumed. Measured arrest lengths scatter considerably, but the causes remain unquantified. To identify them, crack initiation and arrest in compressed V-notched rhombus-hole PMMA specimens are analyzed probabilistically using the coupled criterion of finite fracture mechanics. Measurement and literature-based scatter are propagated by Monte Carlo simulation (25000 Latin Hypercube samples) and assessed by sensitivity analyses. For a representative geometry, the scatter of the initiation force (coefficient of variation = 8.5%) is dominated by the fracture toughness (first-order Sobol index = 0.80), that of the initiation length by the tensile strength (0.57), and that of both arrest-length bounds by the notch opening angle (0.50, 0.47). Within its measured tolerance (about +/-3°), this angle changes the predicted arrest length by 55%; hence, measured arrest lengths reveal little about the initiation length. For opening angles β ≥ 90°, 92% of published PMMA experiments fall within the predicted 5th–95th percentile range of the initiation force, and measured arrest lengths lie near the lower bound. The mean initiation force is overestimated 5.0% on average and by up to 17.9% for the smallest opening angle and hole size, which is attributed to manufacturing imperfections. Future experiments should characterize the tested batch's material properties, measure each specimen's notch geometry, and favor large opening angles.
- Open Access
- 19 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Comment on egusphere-2026-3554
Mixed-mode fracture toughness of natural snow weak layers has rarely been measured directly, yet it is a key parameter governing dry-snow slab avalanche release on inclined, snow-covered slopes. Most prior estimates relied on assumed elastic properties of slab and weak layer rather than direct measurements. Here, we present field-based fracture experiments investigating the seasonal evolution of the mixed-mode fracture toughness of a natural weak layer composed of faceted crystals. We introduce a novel method that combines digital image correlation of snow displacement fields with inverse modeling to derive effective elastic properties of both the weak layer and the overlying slab. These experimentally constrained elastic properties provided more robust estimates of weak layer fracture toughness than previously possible. Results show a clear increase in fracture toughness over the season from 0.29 ± 0.042 J m-2 to 0.67 ± 0.06 J m-2 in mode I and from 0.10 ± 0.022 J m-2 to 1.0 ± 0.1 J m-2 in mode II. The effective elastic modulus of the weak layer evolved from approximately 0.63 ± 0.094 MPa at the beginning of the measurement period to 0.40 ± 0.046 MPa later in the season, while slab elasticity increased from 16 ± 1 MPa at the start to 40 ± 2 MPa. Furthermore, micro-computed tomography and manual snow profiles revealed that, although the weak layer density remained nearly constant, the specific surface area decreased and the mean local ice and pore thickness increased, as did the grain size. These findings suggest that the increases in both mode I and mode II fracture toughness are associated with grain size growth and growth of the bonds between the grains. The study further demonstrates that displacement-constrained inverse modeling provides robust snow elastic properties, improving fracture-mechanical estimates of avalanche release processes.
- 19 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-33
Open AccessComment on egusphere-2026-3554
Mixed-mode fracture toughness of natural snow weak layers has rarely been measured directly, yet it is a key parameter governing dry-snow slab avalanche release on inclined, snow-covered slopes. Most prior estimates relied on assumed elastic properties of slab and weak layer rather than direct measurements. Here, we present field-based fracture experiments investigating the seasonal evolution of the mixed-mode fracture toughness of a natural weak layer composed of faceted crystals. We introduce a novel method that combines digital image correlation of snow displacement fields with inverse modeling to derive effective elastic properties of both the weak layer and the overlying slab. These experimentally constrained elastic properties provided more robust estimates of weak layer fracture toughness than previously possible. Results show a clear increase in fracture toughness over the season from 0.29 ± 0.042 J m-2 to 0.67 ± 0.06 J m-2 in mode I and from 0.10 ± 0.022 J m-2 to 1.0 ± 0.1 J m-2 in mode II. The effective elastic modulus of the weak layer evolved from approximately 0.63 ± 0.094 MPa at the beginning of the measurement period to 0.40 ± 0.046 MPa later in the season, while slab elasticity increased from 16 ± 1 MPa at the start to 40 ± 2 MPa. Furthermore, micro-computed tomography and manual snow profiles revealed that, although the weak layer density remained nearly constant, the specific surface area decreased and the mean local ice and pore thickness increased, as did the grain size. These findings suggest that the increases in both mode I and mode II fracture toughness are associated with grain size growth and growth of the bonds between the grains. The study further demonstrates that displacement-constrained inverse modeling provides robust snow elastic properties, improving fracture-mechanical estimates of avalanche release processes.
- Open Access
- 15 October 2026
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 72, e103
Field measurements of multiaxial strength of weak snow layers
Dry-snow slab avalanche release is initiated by a failure in a buried weak layer. Quantifying the multiaxial strength of weak snow layers is therefore essential, yet field measurements remain scarce compared to laboratory or numerical studies. We developed a mobile testing machine to quantify the multiaxial strength of weak snow layers in the field. We measured the strength of two layers of buried surface hoar: SH24 (43 samples) and SH25 (75 samples), and derived the corresponding failure envelopes. Even though the strength values exhibited considerable scatter, the data were described by an elliptical failure envelope. Compressive strength exceeded shear strength for both layers, with higher strength values for SH24 ( sigma c equals 7.9 plus or minus 0.6 kPa $\sigma_\mathrm{c} = 7.9 \pm 0.6\,\mathrm{kPa}$ , tau c equals 5.8 plus or minus 0.4 kPa $\tau_\mathrm{c} = 5.8 \pm 0.4\,\mathrm{kPa}$ ) compared to SH25 ( sigma c equals 5.0 plus or minus 0.3 kPa $\sigma_\mathrm{c} = 5.0 \pm 0.3\,\mathrm{kPa}$ , tau c equals 3.5 plus or minus 0.2 kPa $\tau_\mathrm{c} = 3.5 \pm 0.2\,\mathrm{kPa}$ ). Micro-computed tomography analysis revealed differences in microstructural parameters, most notably indicating that SH25 had a finer and more connected structure. Video-based digital image correlation showed that the effective strain rates in the weak layers were on the order of 10 minus 3 $^{-3}$ s minus 1 $^{-1}$ and typically larger in shear than in compression. This work provides multiaxial strength data of weak layers, valuable for comparison with laboratory experiments and for informing numerical models.- 15 October 2026
- Published by Cambridge University Press (CUP) in Journal of Glaciology
- Vol. 72, e103
Open AccessField measurements of multiaxial strength of weak snow layers
Dry-snow slab avalanche release is initiated by a failure in a buried weak layer. Quantifying the multiaxial strength of weak snow layers is therefore essential, yet field measurements remain scarce compared to laboratory or numerical studies. We developed a mobile testing machine to quantify the multiaxial strength of weak snow layers in the field. We measured the strength of two layers of buried surface hoar: SH24 (43 samples) and SH25 (75 samples), and derived the corresponding failure envelopes. Even though the strength values exhibited considerable scatter, the data were described by an elliptical failure envelope. Compressive strength exceeded shear strength for both layers, with higher strength values for SH24 ( sigma c equals 7.9 plus or minus 0.6 kPa $\sigma_\mathrm{c} = 7.9 \pm 0.6\,\mathrm{kPa}$ , tau c equals 5.8 plus or minus 0.4 kPa $\tau_\mathrm{c} = 5.8 \pm 0.4\,\mathrm{kPa}$ ) compared to SH25 ( sigma c equals 5.0 plus or minus 0.3 kPa $\sigma_\mathrm{c} = 5.0 \pm 0.3\,\mathrm{kPa}$ , tau c equals 3.5 plus or minus 0.2 kPa $\tau_\mathrm{c} = 3.5 \pm 0.2\,\mathrm{kPa}$ ). Micro-computed tomography analysis revealed differences in microstructural parameters, most notably indicating that SH25 had a finer and more connected structure. Video-based digital image correlation showed that the effective strain rates in the weak layers were on the order of 10 minus 3 $^{-3}$ s minus 1 $^{-1}$ and typically larger in shear than in compression. This work provides multiaxial strength data of weak layers, valuable for comparison with laboratory experiments and for informing numerical models. - Open Access
- 4 August 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-33
Seasonal increase of the mixed-mode fracture toughness of faceted-crystal weak layers
Mixed-mode fracture toughness of natural snow weak layers has rarely been measured directly, yet it is a key parameter governing dry-snow slab avalanche release on inclined, snow-covered slopes. Most prior estimates relied on assumed elastic properties of slab and weak layer rather than direct measurements. Here, we present field-based fracture experiments investigating the seasonal evolution of the mixed-mode fracture toughness of a natural weak layer composed of faceted crystals. We introduce a novel method that combines digital image correlation of snow displacement fields with inverse modeling to derive effective elastic properties of both the weak layer and the overlying slab. These experimentally constrained elastic properties provided more robust estimates of weak layer fracture toughness than previously possible. Results show a clear increase in fracture toughness over the season from 0.29 ± 0.042 J m-2 to 0.67 ± 0.06 J m-2 in mode I and from 0.10 ± 0.022 J m-2 to 1.0 ± 0.1 J m-2 in mode II. The effective elastic modulus of the weak layer evolved from approximately 0.63 ± 0.094 MPa at the beginning of the measurement period to 0.40 ± 0.046 MPa later in the season, while slab elasticity increased from 16 ± 1 MPa at the start to 40 ± 2 MPa. Furthermore, micro-computed tomography and manual snow profiles revealed that, although the weak layer density remained nearly constant, the specific surface area decreased and the mean local ice and pore thickness increased, as did the grain size. These findings suggest that the increases in both mode I and mode II fracture toughness are associated with grain size growth and growth of the bonds between the grains. The study further demonstrates that displacement-constrained inverse modeling provides robust snow elastic properties, improving fracture-mechanical estimates of avalanche release processes.
- 4 August 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-33
Open AccessSeasonal increase of the mixed-mode fracture toughness of faceted-crystal weak layers
Mixed-mode fracture toughness of natural snow weak layers has rarely been measured directly, yet it is a key parameter governing dry-snow slab avalanche release on inclined, snow-covered slopes. Most prior estimates relied on assumed elastic properties of slab and weak layer rather than direct measurements. Here, we present field-based fracture experiments investigating the seasonal evolution of the mixed-mode fracture toughness of a natural weak layer composed of faceted crystals. We introduce a novel method that combines digital image correlation of snow displacement fields with inverse modeling to derive effective elastic properties of both the weak layer and the overlying slab. These experimentally constrained elastic properties provided more robust estimates of weak layer fracture toughness than previously possible. Results show a clear increase in fracture toughness over the season from 0.29 ± 0.042 J m-2 to 0.67 ± 0.06 J m-2 in mode I and from 0.10 ± 0.022 J m-2 to 1.0 ± 0.1 J m-2 in mode II. The effective elastic modulus of the weak layer evolved from approximately 0.63 ± 0.094 MPa at the beginning of the measurement period to 0.40 ± 0.046 MPa later in the season, while slab elasticity increased from 16 ± 1 MPa at the start to 40 ± 2 MPa. Furthermore, micro-computed tomography and manual snow profiles revealed that, although the weak layer density remained nearly constant, the specific surface area decreased and the mean local ice and pore thickness increased, as did the grain size. These findings suggest that the increases in both mode I and mode II fracture toughness are associated with grain size growth and growth of the bonds between the grains. The study further demonstrates that displacement-constrained inverse modeling provides robust snow elastic properties, improving fracture-mechanical estimates of avalanche release processes.
- Open Access
- 1 July 2026
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 35 (7) , 075023
Explainable AI for impact detection in smart composites: insights into transfer learning and model robustness
Smart composite structures have substantial utility in high-performance applications such as aerospace and wind energy, where real-time impact detection is essential for structural health monitoring (SHM). machine learning (ML) enables the use of low-cost micro-electromechanical systems (MEMS) accelerometers for impact localization; however, existing approaches often lack robustness outside controlled laboratory conditions. In this study, we propose a full-stack framework for systematic evaluation of ML methods for impact localization on smart composites. The contributions include: (i) a customizable experimental setup for efficient data acquisition, (ii) a software framework for training and benchmarking ML and deep learning models under varying conditions, (iii) a regression-based architecture with improved accuracy, robustness, and transferability, (iv) transfer learning for efficient adaptation across structural configurations, and (v) explainable artificial intelligence (XAI) components for physical interpretation. Our results show that the proposed regression approach is robust to small deviations in the experimental setup ( < 1 % accuracy loss), though larger variations, such as structural modifications, significantly degrade the models’ performance. Regression models consistently outperform classification methods, with gains of 1%–5% under minor variations and up to 33% under severe changes. Transfer learning reduces required training data by 88% while maintaining accuracy within 2% of a fully trained model. Integrated gradients further provide preliminary insight into the underlying localization mechanisms. These results demonstrate improved robustness, data efficiency, and interpretability, supporting the deployment of data-driven SHM in real-world smart composite structures.
- 1 July 2026
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 35 (7) , 075023
Open AccessExplainable AI for impact detection in smart composites: insights into transfer learning and model robustness
Smart composite structures have substantial utility in high-performance applications such as aerospace and wind energy, where real-time impact detection is essential for structural health monitoring (SHM). machine learning (ML) enables the use of low-cost micro-electromechanical systems (MEMS) accelerometers for impact localization; however, existing approaches often lack robustness outside controlled laboratory conditions. In this study, we propose a full-stack framework for systematic evaluation of ML methods for impact localization on smart composites. The contributions include: (i) a customizable experimental setup for efficient data acquisition, (ii) a software framework for training and benchmarking ML and deep learning models under varying conditions, (iii) a regression-based architecture with improved accuracy, robustness, and transferability, (iv) transfer learning for efficient adaptation across structural configurations, and (v) explainable artificial intelligence (XAI) components for physical interpretation. Our results show that the proposed regression approach is robust to small deviations in the experimental setup ( < 1 % accuracy loss), though larger variations, such as structural modifications, significantly degrade the models’ performance. Regression models consistently outperform classification methods, with gains of 1%–5% under minor variations and up to 33% under severe changes. Transfer learning reduces required training data by 88% while maintaining accuracy within 2% of a fully trained model. Integrated gradients further provide preliminary insight into the underlying localization mechanisms. These results demonstrate improved robustness, data efficiency, and interpretability, supporting the deployment of data-driven SHM in real-world smart composite structures.
- Open Access
- 26 May 2026
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 343
Mixed-mode fracture of porous, bonded snow
- 26 May 2026
- Published by Elsevier in Engineering Fracture Mechanics
- Vol. 343
Open AccessMixed-mode fracture of porous, bonded snow
- 14 May 2026
- Published by Walter de Gruyter GmbH in TM - Technisches Messen
- Vol. 93 (9-10) , 499-508
Development of an automated mechanical testbed for efficient experiments on smart composites
Impact detection for carbon-fiber reinforced plastics plays an important role in structural health monitoring systems. Such systems can extend the service life of these valueable engineered materials and thus contribute to improving their viability for demanding applications such as aerospace. The proliferation of machine learning (ML) has enabled the use of low-cost micro-electromechanical systems sensors in impact monitoring. ML models trained on impact data require consistent datasets containing a large number of individual impact samples. To advance research in this area, we developed an automated testbed for collecting low-energy impact data on composite structures. Since the testbed is fully computer-controlled, the generated impacts are precise, repeatable, and inexpensive. Additionally, we developed a complete data processing pipeline that further reduces the effort required for large-scale impact experiments. Emphasizing runtime stability allows the testbed to support error recovery and collect over 1,750 impacts per hour. Consequently, we can to collect two large datasets daily, each containing over 17,500 impact samples.
- 14 May 2026
- Published by Walter de Gruyter GmbH in TM - Technisches Messen
- Vol. 93 (9-10) , 499-508
Development of an automated mechanical testbed for efficient experiments on smart composites
Impact detection for carbon-fiber reinforced plastics plays an important role in structural health monitoring systems. Such systems can extend the service life of these valueable engineered materials and thus contribute to improving their viability for demanding applications such as aerospace. The proliferation of machine learning (ML) has enabled the use of low-cost micro-electromechanical systems sensors in impact monitoring. ML models trained on impact data require consistent datasets containing a large number of individual impact samples. To advance research in this area, we developed an automated testbed for collecting low-energy impact data on composite structures. Since the testbed is fully computer-controlled, the generated impacts are precise, repeatable, and inexpensive. Additionally, we developed a complete data processing pipeline that further reduces the effort required for large-scale impact experiments. Emphasizing runtime stability allows the testbed to support error recovery and collect over 1,750 impacts per hour. Consequently, we can to collect two large datasets daily, each containing over 17,500 impact samples.