A Configurable Noise-Shaping Band-Pass SAR ADC With Two-Stage Clock-Controlled Amplifier
- 6 August 2020
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 67 (11) , 3728-3739
Abstract
This article presents an 8x-oversampling successive approximation register (SAR) analog-to-digital converter (ADC) with configurable center frequency of noise shaping (NS), which permits the signal passband being configured to any one of the 8 equally divided sub-bands in the first Nyquist band. The configurable noise shaping is realized by an error-feedback (EF) structure with an adjustable 2-tap switched-capacitor (SC) FIR filter. Taking advantage of the sub-bands' symmetry, the selection of the 8 sub-bands are determined by only a 2-bit controlled variable capacitor in the FIR filter in addition to one bit indicating which half-band the target sub-band is in. As a result, the configuration circuit is area efficient and introduces very little parasitic into the critical EF path. A 2-stage clock-controlled amplifier (CAMP) is proposed for the EF path, which can ensure gain and speed simultaneously through allocating reasonable currents into the gain stage and the driving stage separately. Implemented in 65-nm CMOS process, measurement results under a sampling rate of 10 MSPS show that the prototype achieves signal-to-noise-and-distortion (SNDR) of 71.9~74.6dB in the 8 sub-bands with 625-KHz bandwidth, corresponding to a Scherier FoM of 171.4 -174 dB. The ADC prototype occupies 0.03-mm² core area and consumes 70-μW average power at 1-V supply voltage.Keywords
Funding Information
- NSFC of China (61974118)
- Science and Technology on Analog Integrated Circuit Laboratory (6142802180105)
This publication has 23 references indexed in Scilit:
- A 250-MHz Pipelined ADC-Based $f_{S}/4$ Noise-Shaping Bandpass ADCIEEE Transactions on Circuits and Systems I: Regular Papers, 2017
- An 11-Bit 250-nW 10-kS/s SAR ADC With Doubled Input Range for Biomedical ApplicationsIEEE Transactions on Circuits and Systems I: Regular Papers, 2017
- A Compiled 9-bit 20-MS/s 3.5-fJ/conv.step SAR ADC in 28-nm FDSOI for Bluetooth Low Energy ReceiversIEEE Journal of Solid-State Circuits, 2017
- An 84 dB dynamic range 62.5–625 kHz bandwidth clock-scalable noise-shaping SAR ADC with open-loop integrator using dynamic amplifier2017
- A 2nd order fully-passive noise-shaping SAR ADC with embedded passive gain2017
- An Oversampling SAR ADC With DAC Mismatch Error Shaping Achieving 105 dB SFDR and 101 dB SNDR Over 1 kHz BW in 55 nm CMOSIEEE Journal of Solid-State Circuits, 2016
- A 2.02–5.16 fJ/Conversion Step 10 Bit Hybrid Coarse-Fine SAR ADC With Time-Domain Quantizer in 90 nm CMOSIEEE Journal of Solid-State Circuits, 2015
- Histogram-Based Ratio Mismatch Calibration for Bridge-DAC in 12-bit 120 MS/s SAR ADCIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2015
- A 10-bit 100-MS/s Reference-Free SAR ADC in 90 nm CMOSIEEE Journal of Solid-State Circuits, 2010
- A Delta-Sigma Modulator With a Widely Programmable Center Frequency and 82-dB Peak SNDRIEEE Journal of Solid-State Circuits, 2008