Numerical Study of a Hydraulic Turbine Designed from Centrifugal Atomizers Theory Varying Its Inlet Parameters
Open Access
Abstract
This study analyzes the feasibility of using pressure swirl atomizers at scale as energy generators. Likewise, the Ansys Fluent numerical simulation tool was used, configured based on the Volume of Fluid (VOF) multiphase model and six DOF motion for rigid bodies. In turn, three configurations of feeding flow were tested: upper manifold, lower manifold, and dual manifold. The numerical results show that it is possible to produce mechanical energy with 29.4% and 32.9% efficiency (using the SST k- and k- turbulence model, respectively), while generating a uniform spray effect at the outlet of the atomizer, even though this has certain ovoid-type deformities. Likewise, it was found that the addition of an internal rotor to the swirl chamber caused the generation of a very low-pressure contour, leading to an increase in the mass flow consumption of the atomizer. Also, four cases were analyzed, considering a hydraulic supply of both manifolds: 250 kPa, 300 kPa, 350 kPa, and 400 kPa, in order to obtain the characteristic curve of the turbine depending on the mass flow obtained for each case. Finally, this research proves how viable the use of this type of technology is in the field of renewable energy generation and the impact on its performance under different configurations of hydraulic supply.
Keywords
Funding Information
- “Dirección de Investigación de la Universidad Peruana de Ciencias Aplicadas” (UPC-EXPOST-2025-1)
This publication has 24 references indexed in Scilit:
- Study of Internal Flow in a Liquid Nitrogen Flow Decelerator Through Swirl Effect Consisting of a Jet-Type Cryogenic Injection System for Food FreezingFluids, 2024
- Comprehensive Theoretical Formulation and Numerical Simulation of the Internal Flow in Pressure-Swirl Atomizers Type Screw-ConveyerEnergies, 2024
- Numerical and Experimental Analysis of Vortex Profiles in Gravitational Water Vortex Hydraulic TurbinesEnergies, 2024
- Study of Internal Flow in Open-End and Closed Pressure-Swirl Atomizers with Variation of Geometrical ParametersAerospace, 2023
- Empirical correlation for spray half cone angle in plain-jet airblast atomizersFuel, 2020
- On the effect of turbulence models on CFD simulations of a counter-current spray drying processChemical Engineering Research and Design, 2019
- Vortex Cascade Features of Turbulent Flow in Hydro-Turbine Blade Passage with Complex GeometryWater, 2018
- Numerical analysis of lift-based in-pipe turbine for predicting hydropower harnessing potential in selected water distribution networks for waterlines optimizationEngineering Science and Technology, an International Journal, 2018
- Review on pressure swirl injector in liquid rocket engineActa Astronautica, 2018
- Spray characteristics of pressure-swirl nozzles at different nozzle diametersApplied Thermal Engineering, 2017