Abstract
Under hydrostatic pressure, both the geometry and dynamic mechanical parameters of underwater acoustic coatings change, affecting sound absorption performance. This paper proposes a composite coating structure with bullet-shaped cavities. The finite element method is used to investigate the effects of coating deformation and mechanical parameter changes under different pressures. The wave velocity method based on direct wave extraction measures the frequency-dependent dynamic mechanical parameters of viscoelastic materials from 500 Hz to 4 kHz under pressure. These measured parameters are introduced into simulations, and the predicted sound absorption coefficient is compared with that obtained using fixed (frequency-independent) parameters. Pressurized sound absorption tests up to 4 MPa are conducted in a water-filled tube. The experimental results show that under normal pressure, the structure achieves an average absorption coefficient of 0.93 in the 1000–4000 Hz band. At 4 MPa, the average coefficient remains 0.58. Simulations using frequency-dependent dynamic mechanical parameters reduce the average absolute deviation from experiments to half of that using fixed parameters (maximum average absolute deviation 0.07). These findings demonstrate the necessity of incorporating frequency-dependent dynamic mechanical parameters into finite element simulations for accurate prediction of hydrostatically loaded underwater acoustic coatings.
Funding Information
  • National Natural Science Foundation of China (12174314)

This publication has 27 references indexed in Scilit: