Multi-objective optimization of the geometric parameters of a pressure-swirl nozzle
- 14 October 2022
- journal article
- research article
- Published by Taylor & Francis in Journal of the Chinese Institute of Engineers
- Vol. 45 (8) , 713-723
Abstract
The geometric parameters of the pressure-swirl nozzle demonstrate a significant effect on the atomization performance such as the spray cone angle and mass flow rate. However, these objectives are incompatible, and obtaining a nozzle geometric parameter that optimizes all the atomization performances is difficult. The effectiveness of the nozzle optimization process is typically low, resulting in high costs. To this purpose, an enhanced CBSO-Kriging surrogate model was developed to solve this expensive black box problem, and the spray cone angle and mass flow rate were optimized using a multi-objective optimization algorithm. Firstly, the optimal Latin hypercube sampling method was used to generate 65 sets of sample points, and the corresponding response values were calculated using CFD simulation. The established surrogate model of atomization performance can predict the atomization characteristics of the nozzle with arbitrary shape. The correlation between the key geometric parameters and the spray cone angle and the mass flow rate was determined on this basis. Then, to find the optimal geometric parameters for the nozzle, the NSGA-II algorithm was used. In comparison to the initial model, the optimization results show that the spray cone angle and mass flow rate increased by 4.26% and 37.74%, respectively.Keywords
Funding Information
- Open Research Subject of Key Laboratory of Fluid (LTDL 2020-006)
This publication has 23 references indexed in Scilit:
- Studies on Spray Behavior of a Pressure Swirl Atomizer in Transition RegimeJournal of Propulsion and Power, 2008
- Experimental Investigation of a Pressure Swirl Atomizer SprayJournal of Propulsion and Power, 2007
- An efficient algorithm for constructing optimal design of computer experimentsJournal of Statistical Planning and Inference, 2005
- Application of kriging method to structural reliability problemsStructural Safety, 2005
- An improved GA and a novel PSO-GA-based hybrid algorithmInformation Processing Letters, 2005
- A fast and elitist multiobjective genetic algorithm: NSGA-IIIEEE Transactions on Evolutionary Computation, 2002
- Kriging Models for Global Approximation in Simulation-Based Multidisciplinary Design OptimizationAIAA Journal, 2001
- Numerical prediction of air core diameter, coefficient of discharge and spray cone angle of a swirl spray pressure nozzleInternational Journal of Heat and Fluid Flow, 2000
- Computational and Experimental Study of Liquid Sheet Emanating from Simplex Fuel NozzleAIAA Journal, 1998
- Correlations for Prediction of Discharge Rate, Core Angle and Air Core Diameter of Swirl Spray AtomizersInternational Journal of Turbo & Jet-Engines, 1990