Effects of temperature, strain rate, and cyclic loading on mechanical behavior of silane‐modified polyurethane sealant
Authors:
- 27 October 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (15)
Abstract
To evaluate the mechanical properties of modified polyurethane sealants in engineering applications, the influences of temperature, strain rate, and cyclic loading on the mechanical properties of silane‐modified polyurethane sealant were experimentally investigated. The monotonic tensile experiments with various strain rates and temperatures were conducted, and strain rate and temperature dependent nonlinear stress–strain curves were obtained. The results showed that the silane‐modified polyurethane sealant exhibited temperature dependence at constant strain rate and rate dependence at room temperature. However, it is shown no obvious rate dependence at temperature of 150°C. In addition, the multi‐step cyclic loading experiments with mean strain decrease and increase at each step were carried out to analyze the influence of cyclic loading and cyclic loading history at different temperatures. The results demonstrated that the viscous behavior of the materials was evidently observed in the first step and disappeared in other steps for the four‐step cyclic loading with mean strain decrease case. Moreover, the cyclic stress relaxation of the materials was not obvious due to the prior cyclic loading with higher mean strain history, while the cyclic stress relaxation of the material continued to occur for the prior cyclic loading with lower mean strain history, and the cyclic strength of the materials decreased with the increase of temperature.Keywords
Funding Information
- National Natural Science Foundation of China (10972200, 50805147)
This publication has 30 references indexed in Scilit:
- Effect of the temperature and strain rate on the tension response of uncured rubber: Experiments and modelingMechanics of Materials, 2020
- Two‐component modified polyurethane sealant for insulating glass: Design, preparation, and applicationJournal of Applied Polymer Science, 2019
- Impact of Climatic Ageing on the Basic Mechanical Properties of Viscoelastic SealantsDefect and Diffusion Forum, 2016
- Studying the effect of stress relaxation and creep on lattice strain evolution of stainless steel under tensionActa Materialia, 2013
- Mechanical properties of anisotropic conductive film with strain rate and temperatureMaterials Science and Engineering: A, 2009
- Creep behavior of eutectic Sn–Ag lead-free solder alloyJournal of Materials Research, 2002
- Creep, stress relaxation, and plastic deformation in Sn-Ag and Sn-Zn eutectic soldersJournal of Electronic Materials, 1997
- Tensile Creep Behavior of Alumina/Silicon Carbide NanocompositeJournal of the American Ceramic Society, 1994
- Minor special issue The present status of adhesion technology. Fundamentals of adhesive bonding technology.JOURNAL OF THE JAPAN WELDING SOCIETY, 1991
- Performance of polyurethane sealants on a strain-cycling exposure rackMaterials and Structures, 1989