Fillet weld strength analysis for cantilever loading: an investigation of single-sided fillet weld strength in bending applications
Open Access
- 1 July 2024
- journal article
- Published by Politeknik Negeri Lhokseumawe in Journal of Welding Technology
- Vol. 6 (1) , 1-16
Abstract
Theoretical calculations for assessing the strength of a welded connection in design rely on two parameters: the tensile strength of the weld filler metal and the effective area. It is important to note that the type of load applied can significantly affect the theoretical strength of the weld. According to the AWS Structural Welding Code D1.1, when the load is applied parallel to the weld in a welded member, a reduction of 70% is recommended. This remaining factor of 0.30 has been determined through well-accepted tests to provide factors of safety between 2.2 for shearing forces parallel to the longitudinal axis of the weld and 4.6 for forces normal to the axis under service loading. When a load is applied perpendicular to the weld in a welded member, the entire value of the tensile strength of the weld filler metal is used to calculate the strength. However, there are no similar considerations for a load applied in a bending configuration. While it is not recommended for structural design, fillet welded members can experience loading that causes material deflection, resulting in a bending scenario. This is particularly relevant in repairs. The configuration of a cantilevered beam creates a different loading scenario with additional stresses on the weld, which differ from those of a perpendicular or parallel load. This research experiment was conducted to initially understand and analyze the strength of a GMAW weld under cantilevered bending and to derive a mathematical equation that provides a factor of safety in the range of 2.2-4.6, similar to the previous findings.Keywords
This publication has 20 references indexed in Scilit:
- Parametric Study on Fatigue Failure Modes of the Rib-Deck Weld Under Out-of-Plane Bending LoadingIranian Journal of Science and Technology, Transactions of Civil Engineering, 2023
- Fatigue strength of partial penetration butt welds of mild steelWelding in the World, 2022
- Experimental investigation of fatigue strength of out-of-plane gusset welded joints under variable amplitude plate bending loading in long life regionWelding in the World, 2022
- Fundamentals of Metal Joining2022
- Influence of weld geometry on stress concentration factor distributions in tubular jointsJournal of Constructional Steel Research, 2021
- On the distortion and warping of cantilever beams with hollow sectionWelding in the World, 2020
- Experimental investigation of effects of welding current and electrode angle on tensile strength of shielded metal arc welded low carbon steel platesMaterials Today: Proceedings, 2020
- Ultimate Strength Capacity of Welded Joints in High Strength SteelsProcedia Structural Integrity, 2017
- On Relation Between Fatigue Properties Of Welded Joints, Quality Criteria and Groups in Iso 5817Welding in the World, 2012
- Development of Weld Quality Criteria Based on Fatigue PerformanceWelding in the World, 2011