RIRobert Merton Stwalley Iii

Robert Merton Stwalley Iii

*This is an algorithmically generated author record based on publicly available information.

Robert Merton Stwalley Iii has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    LIWC Analysis of Peterson Characteristics for Low Socio-Economic Students having Collegiate STEM Majors

    by Grace L. Baldwin Kan-Uge, Virginia Booth Womack, Sarah E. La Rose, Carol S. Stwalley, Robert M. Stwalley Iii

    This paper provides a computerized language analysis of two levels of students’ writing samples from the Purdue Rising Scholars program, looking at whether the characteristics associated with being open to mentor supporter counseling and guidance can be detected or were grown during the student’s experiences in higher education. The LIWC program, a well-accepted software package developed at the University of Texas – Austin, was implemented with terms derived from Derrick Peterson’s Web of Support questionnaire. The work described in this article is similar to a previous study by the same researchers on the same writing samples looking for general psychological and professional characteristics. Target words from the Peterson questionnaire were identified, and similar terms were compiled to complete the LIWC software’s dictionaries. This effort preliminarily extends the use of computerized language analysis codes into student success applications. Aggregate samples from two levels of the collegiate experience were examined using independent sample t-tests, and individual student growth across the two samples was reviewed using matched sample t-tests. Both types of tests indicated that advanced writing samples demonstrated increased levels of reliability and attentiveness, while matriculation level samples showed increased levels of high expectations. The Rising Scholars program was a NSF S-STEM funded effort at Purdue University to determine if mentoring and support for low socio-economic status students could overcome deficiencies in preparation as identified by traditional collegiate admissions processes. The program ultimately graduated 19 out of 21 students from Purdue University, with 16 receiving STEM degrees and 11 of those being in engineering.

  • Open Access

    Graduation Data and Concluding Analysis for the Mentoring Support Network Program for Low Socio-economic Students Pursuing Collegiate STEM Majors

    by Grace L. Baldwin Kan-Uge, Virginia Booth Womack, Sarah E. La Rose, Carol S. Stwalley, Robert M. Stwalley Iii

    Technological advancement and mindset re-engineering are crucial for empowering disenfranchised African youth towards early academic citizenship. Innovation and creativity are age-driven; hence, there is an increasing need to encourage and engage involve youths in the strategic sectors of African economies, including education, agriculture, governance or resource management. The article is therefore, a clarion call for greater collaboration in achieving this goal of creating a better future for Africans and the next generations. This commences with interrogating how the youths are allowed to participate in academic citizenship in Africa. The article highlights the challenges facing academic citizenship thereby suggesting strategies to enhance the development and engagement of early-career academics (ECAs) by adopting the Brain Re-Engineering (BRECR) Initiative. Interestingly, the BRECR concept relies on five pillars: mindset or perception change; ideation and entrepreneurship; technology amalgamation; sustainability and circular economy, and social equity in public policy. BRECR critiques the youth-constrained involvement in strategic economic sectors, and the proponent of BRECR advocates for technological and scientific advancements (first in agriculture and other strategies sectors of developing economies). The article superimposes BRECRs prescribed solution to the challenges of grooming ECAs across HEIs in Africa. It further recommends ethical governance, perception change, empowerment of ECAs, identification of youth participation hindrances, and promotion of ECA mentorship programmes in Africa. It concludes that ECAs have a crucial role in promoting scientific research, education, technology, and social development, and should be encouraged to foster academic citizenship and encourage fresh, innovative, and original ideas within the evolving educational landscape.

  • Open Access

    A Review of the Energy Benefits from the Hybridization of Diesel Locomotives

    by Andrew Chen, James Duncan, John Keyser, Avery Pritts, Adrian Schouten, Luke Williams, Tovia G. Owens, Robert M. Stwalley

    Railroads remain one of the most fuel-efficient modes of freight transportation, yet growing environmental pressures demand further improvements in operational sustainability. This chapter investigates the hybridization of diesel locomotives as a transitional technology toward full railroad system electrification, outlining the technical foundations of hybridization, including traction motor design, adhesion dynamics, and regenerative braking. The literature review synthesizes findings from industrial pilot projects and academic studies, highlighting both lithium-ion batteries and the limitations of lead-ion batteries and the limitations of earlier lead-acid systems. Case studies showcasing Norfolk Southern’s hybrid units and Nexrail’s shunting locomotives, which demonstrate measurable fuel savings and emission reductions, are examined. These findings indicate that the economic viability of hybrid locomotives currently remains constrained by high capital costs and reliance on government subsidies. This chapter also evaluates advanced hybrid concepts, including dual-storage architectures combining batteries and supercapacitors, as well as hydrogen fuel-cell hybrids, noting their technical feasibility, infrastructure issues, and safety challenges. As well, the Study of Catenary Electrification of the North American Class I Railroad: Final Electrification Report (2025) is reviewed to contextualize hybridization within the broader debate on direct overall railroad system electrification. The report emphasizes the US$1 trillion cost of hanging electrical conductor catenary infrastructure and the transitional role of hybrids in bridging transition discontinuities. The current analysis concludes that hybrid locomotives offer meaningful efficiency gains within specific operational contexts, but their widespread adoption will depend on continued advances in energy storage, supportive policy frameworks, and the long-term alignment with overall worldwide electrification initiatives.

  • Open Access

    LIWC Review of Reflective Writing Samples about Experiential Experiences as a Mechanism for Assessing Undergraduate Rising Scholars Students Growth and Support in STEM Majors

    by Grace L. Baldwin Kan-Uge, Virginia Booth Womack, Sarah E. La Rose, Carol S. Stwalley, Robert M. Stwalley Iii

    This chapter reports on an effort to use a well-regarded language analysis software program, Linguistic Inquiry and Word Count (LIWC), to investigate the differences in writing samples of students from the Purdue University Rising Scholars program between their matriculation point and an advanced level following guided experiential experiences. The LIWC program identifies words within a sample text and compares the resultant counts to defined dictionaries associated with certain characteristics. This effort utilized 16 of the original LIWC psychological model categories and created 16 new professional skills categories. The writing samples were examined from an aggregated perspective at each level and then additionally in a paired format to determine individual differences across time. Although the original LIWC categories produced more word “hits” than the new professional categories, statistically significant results were inferred for both sets of terms. In general, advanced students provided more clinical and less personal writing samples, as would be expected. Several of the professional skills that could be identified with the program’s selection criteria were present in both the matriculating and advanced-level texts. Based on their writing samples, the Rising Scholars students at the advanced level exhibited improved analytical thinking, an increased use of larger descriptive words, an enhanced perception of how their work would be perceived by others, improved mental flexibility, an increased level of patience, and a greater exhibition of resourcefulness in problem-solving.


  • Open Access

    Electrical Hybridization of Agricultural Power Units

    by Jacob Bunton, Drew Casterton, James Czub, Allydale Downey, Noah Haslett, Wade Kinnaman, Jack McIntire, Jake Lengacher, Robert M. Stwalley Iii

    The electrification of vehicular systems has been increasingly pursued for heavy machinery, with incentives from society as well as government bodies to reduce emissions. Advancements in electrified drivetrains also allow for noise reduction in propulsive systems, enhanced controllability through electric motors and actuators, and updated system infrastructure. New infrastructure updates include innovative technologies such as energy regeneration and increased automation potential. However, the implementation of electrification in heavy off-road vehicles has numerous challenges, including component sizes, weights, costs, range limitations, and infrastructure requirements. These various issues are not new, and historical approaches to overcoming them in on-road applications provide valuable insights. One current challenge within agricultural equipment is providing batteries lightweight enough to avoid a serious increase in vehicle weight while maintaining power output. The lack of vehicular range is of significant concern for agricultural applications, as well as the required upgrades to the local electrical infrastructure to accommodate charging. This chapter explores the evolution of a compromise solution to these challenges through electric hybridization, examining what has been done in the past, what has succeeded and been maintained, as well as what has not worked and why. The success of diesel-electric hybrids in rail and off-highway truck fields suggests potential applications in agriculture and other off-road sectors, and thus particular focus will be placed on prior art in these fields. An integrated tractor/implement simulation has been used to estimate the potential benefits of electrical hybridization and appears to demonstrate some benefits under certain conditions.


  • Open Access

    Alternative Propulsive and Drivetrain Methodologies for Energy Engineering in Agricultural and Off-Road Vehicles

    by Elijah Collins, Reece Durbin, Nicholas Hoff, Brandon Kitch, Porter Little, Tovia Owens, Seshan Calapatti Suresh, Robert M. Stwalley Iii

    This chapter is a review of the potential alternative propulsion power and drivetrain methods in agricultural and off-road vehicles. It is vital that sustainable, efficient, and resilient solutions to off-road vehicle power sources be found to overcome the economic, environmental, and operational challenges associated with the transition from fossil fuel sources. The areas to be explored in this chapter are electric vehicles, diesel–electric hybrids, hydrogen fuel cell and internal combustion engines, natural gas and methane engines, and biofuel-powered tractors, as well as electric-continuously variable transmissions and hydrostatic transmissions. Each topic will be highlighted along with research and analysis pertaining to the feasibility, advantages, and disadvantages of each topic, in comparison to their more traditional alternatives. The findings of each alternative propulsion and traction method will be further evaluated to determine recommendations moving forward pertaining to the manufacture of each method, or if the method should be reconsidered for use in modern-day agriculture and off-road vehicles. Recommendations will divide the examined technologies into those with immediate potential, those that may be useful in the near future, and those unlikely to be of use within the agricultural realm for some time to come.


  • Open Access

    Intermittent Flow Control Schemes for Heat Stress Mitigation in Lactating Sows on a Floor Cooling Pad

    by Tyler C. Field, Allan P. Schinckel, Robert M. Stwalley

    The Purdue hog cooling pad has previously been demonstrated to mitigate heat stress in lactating sows by conductively transferring heat from a sow to cool water running through an integral heat exchanger. Coolant effectiveness, which describes how much heat is removed per volume of water flushed through the cooling pad, is used to compare the operation under varying conditions. Past studies have indicated that the intermittent flow of cooling water achieves a greater coolant effectiveness than continuous flow operational schemes. An electronic control system was implemented with the current cooling pad design to allow for the automated control of a solenoid valve to create the intermittent flow conditions. All testing was performed using 18 ± 1 °C inlet water. Potential control schemes were categorized into two groups, temporal and temperature threshold. The temporal schemes opened the solenoid for 30 s, enough time to flush the entire contents of the cooling coils, before closing for 3, 6, or 9 min. The temperature threshold control schemes utilized feedback from thermal probes embedded beneath the surface of the cooling pad to open the solenoid for 30 s, when a maximum surface temperature was detected. Trigger temperatures of 28.0, 29.5, or 31.0 °C were used. The temperature threshold control schemes achieved greater heat transfer rates (348, 383, 268 W) compared to the temporal control schemes (324, 128, 84 W). The cooling effectiveness for all control schemes ranged from 46.6 to 64.7 kJ/L. The tested intermittent flow control schemes in this study achieved greater cooling effectiveness than continuous flow systems from previous studies (time: 51 kJ/L; temperature: 61 kJ/L; steady: 5.8 kJ/L), although the temporal control schemes exhibited lower heat transfer rates (time: 180 W; temperature: 330 W; steady: 305 W).

  • Open Access

    A Review of Sanitation Options and Programming in Ghana, West Africa

    by Grace L. Baldwin Kan-Uge, Elvis Kan-Uge, Robert M. Stwalley

    This review examines Ghana’s progress in sanitation. These efforts include the containment, transport, treatment, and disposal or reuse of human waste. This research specifically examined the current sanitation processes and programming efforts within Ghana, West Africa. Some reports indicate that Ghana is the second dirtiest country in Africa and the seventh dirtiest country in the world. A review of the current water, sanitation, and hygiene (WASH) options within the country indicates that significant efforts need to be undertaken. There are multiple toilet options and current practices within the country for the disposal of excrement. Unfortunately, the municipal sewer systems and wastewater treatment facilities within the country are either broken down or severely inadequate compared to their surrounding population. Current WASH programming, extension efforts, and key factors affecting the uptake of sanitation investment are reviewed. The price point where consumers would utilize sanitation products and services was analyzed, as well as the cost-to-benefit ratio of specific technologies for community members. This review demonstrated that initiatives should be undertaken to provide more sanitation professionals, renovate and expand urban municipal sewerage systems, and provide basic access to rural community areas. It was recommended that future programming, extension, and policy efforts be intentional and include relevant stakeholders and community members to provide a greater opportunity for establishing successful and substantial efforts.


  • Open Access

    The Utilization of Composite Bearings in Heavy Agricultural, Construction, Forestry, and Mining Equipment Design Applications

    by Thomas Barnes, Brecken Beyer, Wyatt Griffey, Caleb Huffmeyer, Clayton Ness, Owen Nifong, Tyler J. McPheron, Robert M. Stwalley Iii

    This design overview will describe composite material bearings and their utilization in agricultural, construction, forestry, and mining heavy equipment. Currently, metallic bearings are used in heavy machinery and implement applications. Most metallic bearings use grease or oil for lubrication. However, metallic bearings generally require periodic maintenance after repetitive use, and they are prone to corrosion. Maintenance intervals are frequent and increase operational down-time for equipment operators and technicians, further increasing operating costs and reducing productivity. Composite bearings are manufactured from fiber-reinforced materials and are produced using a variety of resin formulas to achieve the desired composite cross section. Potential design applications of self-lubricated composite bearings using polytetrafluoroethylene (PTFE) or other embedded lubrication materials to minimize friction coefficients are presented. Composite bearings are advantageous in heavy equipment applications, due to their greaseless design, corrosion resistance, high-bearing load capacities, and resistance to fatigue loads and impact. Off-road equipment operates in harsh environments and is designed with heavy-duty components that resist these conditions. An understanding of composite bearing characteristics will allow engineers to more frequently incorporate them into their designs, reducing maintenance costs, improving machine productivity, and accommodating adverse environmental conditions, all while minimizing bearing wear and friction created by mechanical motion.


  • Open Access

    Fillet weld strength analysis for cantilever loading: an investigation of single-sided fillet weld strength in bending applications

    by Tyler J. McPheron, Robert M. Stwalley Iii

    Theoretical calculations for assessing the strength of a welded connection in design rely on two parameters: the tensile strength of the weld filler metal and the effective area. It is important to note that the type of load applied can significantly affect the theoretical strength of the weld. According to the AWS Structural Welding Code D1.1, when the load is applied parallel to the weld in a welded member, a reduction of 70% is recommended. This remaining factor of 0.30 has been determined through well-accepted tests to provide factors of safety between 2.2 for shearing forces parallel to the longitudinal axis of the weld and 4.6 for forces normal to the axis under service loading. When a load is applied perpendicular to the weld in a welded member, the entire value of the tensile strength of the weld filler metal is used to calculate the strength. However, there are no similar considerations for a load applied in a bending configuration. While it is not recommended for structural design, fillet welded members can experience loading that causes material deflection, resulting in a bending scenario. This is particularly relevant in repairs. The configuration of a cantilevered beam creates a different loading scenario with additional stresses on the weld, which differ from those of a perpendicular or parallel load. This research experiment was conducted to initially understand and analyze the strength of a GMAW weld under cantilevered bending and to derive a mathematical equation that provides a factor of safety in the range of 2.2-4.6, similar to the previous findings.