The Influence of Cutting Technology on Magnetic Properties of Non-Oriented Electrical Steel—Review State of the Art
Open Access
Abstract
The global drive to reduce energy consumption poses new challenges for designers of electrical machines. Losses in the core are a significant part of losses, especially for machines operating at an increased rotational speed powered by PWM inverters. One of the important problems when calculating core losses is considering the effect of material degradation due to mechanical or laser cutting. To this aim, this paper analyzes and summarizes the knowledge about the sources of material property deterioration and ways of describing this phenomenon. The cited results of material tests indicate the lack of unequivocal relationships allowing us to estimate the degree of material damage and the resulting deterioration of material properties. The main task of this article is to present the state of knowledge on the possibility of taking into account the impact of cutting the core sheets of electric motors on core losses and their impact on the efficiency of the machine. This is a significant problem due to the need to design and manufacture energy-saving electric motors powered with a voltage of 20 to 350 Hz, whose magnetic cores are made of laminates. However, the performed analysis indicates the most important parameters of the cutting process, affecting the degree of material structure destruction. The method of the solution proposed by the authors for core punching and laser cutting, illustrated with a practical example, is also presented.Keywords
Funding Information
- Narodowe Centrum Nauki (2019/35/B/ST8/00764)
This publication has 119 references indexed in Scilit:
- Mathematical model for cutting effect on magnetic flux distribution near the cut edge of non-oriented electrical steelsComputational Materials Science, 2008
- Influence of shearing process on domain structure and magnetic properties of non-oriented electrical steelJournal of Magnetism and Magnetic Materials, 2006
- Numerical Calculations of Electromagnetic Fields in Silicon Steel Under Mechanical StressIEEE Transactions on Magnetics, 2004
- Influence of abrasive waterjet cutting on the magnetic properties of non-oriented electrical steelsJournal of Magnetism and Magnetic Materials, 2003
- The effect of the guillotine clearance on the magnetic properties of electrical steelsJournal of Magnetism and Magnetic Materials, 2003
- Effect of punching on electrical steels: Experimental and numerical coupled analysisIEEE Transactions on Magnetics, 2000
- Some aspects of the magnetomechanical coupling in the strengthening of nonoriented and grain-oriented 3% SiFe alloysIEEE Transactions on Magnetics, 1997
- Influence of the plastic anisotropy on the magnetic properties of a nonoriented 3% silicon ironJournal of Applied Physics, 1996
- Theory of the remanence in grain-oriented Si-Fe sheets in presence of external stressesIEEE Transactions on Magnetics, 1981
- Der einfluss des stanzens auf die magnetischen eigenschaften von elektroblech mit 1% siliziumJournal of Magnetism and Magnetic Materials, 1975