Modeling and Characterization of the on-Resistance in 4H-SiC Power BJTs
- 19 May 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 58 (7) , 2081-2087
Abstract
The on-resistance of silicon carbide bipolar transistors is characterized and simulated. Output characteristics are compared at different base currents and different temperatures in order to validate the physical model parameters. A good agreement is obtained, and the key factors, which limit the improvement of RON, are identified. Surface recombination and material quality play an important role in improving device performances, but the device design is also crucial. Based on simulation results, a design that can enhance the conductivity modulation in the lowly doped drift region is proposed. By increasing the base doping in the extrinsic region, it is possible to meet the requirements of having low voltage drop, high current density, and satisfactory forced current gain. According to simulation results, if the doping is 5 ×1018 cm-3, it is possible to conduct 200 A/cm2 at VCE = 1 V by having a forced current gain of about 8, which represents a large improvement, compared with the simulated value of only one in the standard design.Keywords
This publication has 18 references indexed in Scilit:
- Influence of Emitter Width and Emitter–Base Distance on the Current Gain in 4H-SiC Power BJTsIEEE Transactions on Electron Devices, 2010
- Modeling and Characterization of Current Gain Versus Temperature in 4H-SiC Power BJTsIEEE Transactions on Electron Devices, 2010
- Fabrication of 2700-V 12-$\hbox{m}\Omega \cdot \hbox{cm}^{2}$ Non Ion-Implanted 4H-SiCBJTs With Common-Emitter Current Gain of 50IEEE Electron Device Letters, 2008
- Low-Forward-Voltage-Drop 4H-SiC BJTs Without Base Contact ImplantationIEEE Transactions on Electron Devices, 2008
- 1200-V 5.2-$\hbox{m}\Omega\cdot\hbox{cm}^{2}$ 4H-SiC BJTs With a High Common-Emitter Current GainIEEE Electron Device Letters, 2007
- 6kV 4H-SiC BJTs with Specific On-resistance Below the Unipolar Limit using a Selectively Grown Base Contact Process2007
- Fabrication and characterization of 4H-SiC P-N junction diodes by selective-epitaxial growth using TaC as the maskJournal of Electronic Materials, 2005
- High‐voltage 4H‐SiC pn diodes fabricated by p‐type ion implantationElectronics and Communications in Japan (Part II: Electronics), 2003
- Simulation of SiC High Power DevicesPhysica Status Solidi (a), 1997
- The minority carrier lifetime of n-type 4H- and 6H-SiC epitaxial layersApplied Physics Letters, 1996